52 research outputs found
Semiconductor membranes for electrostatic exciton trapping in optically addressable quantum transport devices
Combining the capabilities of gate defined quantum transport devices in
GaAs-based heterostructures and of optically addressed self-assembled quantum
dots could open broad perspectives for new devices and functionalities. For
example, interfacing stationary solid-state qubits with photonic quantum states
would open a new pathway towards the realization of a quantum network with
extended quantum processing capacity in each node. While gated devices allow
very flexible confinement of electrons or holes, the confinement of excitons
without some element of self-assembly is much harder. To address this
limitation, we introduce a technique to realize exciton traps in quantum wells
via local electric fields by thinning a heterostructure down to a 220 nm thick
membrane. We show that mobilities over
cmVs can be retained and that quantum point contacts and
Coulomb oscillations can be observed on this structure, which implies that the
thinning does not compromise the heterostructure quality. Furthermore, the
local lowering of the exciton energy via the quantum-confined Stark effect is
confirmed, thus forming exciton traps. These results lay the technological
foundations for devices like single photon sources, spin photon interfaces and
eventually quantum network nodes in GaAs quantum wells, realized entirely with
a top-down fabrication process.Comment: v2: added missing acknowledgement. v3: fixed typos in acknolwedgemen
Fully in situ Nb/InAs-nanowire Josephson junctions by selective-area growth and shadow evaporation
Josephson junctions based on InAs semiconducting nanowires and Nb superconducting electrodes are fabricated in situ by a special shadow evaporation scheme for the superconductor electrode. Compared to other metallic superconductors such as Al, Nb has the advantage of a larger superconducting gap which allows operation at higher temperatures and magnetic fields. Our junctions are fabricated by shadow evaporation of Nb on pairs of InAs nanowires grown selectively on two adjacent tilted Si (111) facets and crossing each other at a small distance. The upper wire relative to the deposition source acts as a shadow mask determining the gap of the superconducting electrodes on the lower nanowire. Electron microscopy measurements show that the fully in situ fabrication method gives a clean InAs/Nb interface. A clear Josephson supercurrent is observed in the current–voltage characteristics, which can be controlled by a bottom gate. The large excess current indicates a high junction transparency. Under microwave radiation, pronounced integer Shapiro steps are observed suggesting a sinusoidal current–phase relation. Owing to the large critical field of Nb, the Josephson supercurrent can be maintained to magnetic fields exceeding 1 T. Our results show that in situ prepared Nb/InAs nanowire contacts are very interesting candidates for superconducting quantum circuits requiring large magnetic fields
InAs nanowires with AlGaSb shells for band alignment engineering
InAs nanowires surrounded by AlxGa1−xSb shells exhibit a change in the band alignment from a broken gap for pure GaSb shells to a staggered type II alignment for AlSb. These different band alignments make InAs/AlxGa1−xSb core–shell nanowires ideal candidates for several applications such as TFETs and passivated InAs nanowires. With increasing the Al content in the shell, the axial growth is simultaneously enhanced changing the morphological characteristics of the top region. Nonetheless, for Al contents ranging from 0 to 100 % conformal overgrowth of the InAs nanowires was observed. AlGaSb shells were found to have a uniform composition along the nanowire axis. High Al content shells require an additional passivation with GaSb to prevent complete oxidation of the AlSb. Irrespective of the lattice mismatch being 1.2% between InAs and AlSb, the shell growth was found to be coherent
Si substrate preparation for the VS and VLS growth of InAs nanowires
The growth of self-catalyzed InAs nanowires on Si(111) substrates via vapour–solid (VS) and vapour–liquid–solid (VLS) growth mechanisms is investigated using molecular beam epitaxy. For both mechanisms, the substrate preparation plays a crucial role. In this context, the required thin oxide layer for the VS growth of the nanowires is obtained by treating the HF-cleaned Si substrate with hydrogen peroxide. For the VLS growth, Ga is predeposited on the unprocessed Si substrate. The Ga forms droplets, which etch the native oxide and create the necessary pinholes.
(© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Crystal Phase Selective Growth in GaAs/InAs Core–Shell Nanowires
We present a novel type of core–shell nanowires in which only certain parts of the core are covered by the shell. This is achieved by the crystal phase selective growth of the InAs shell on zinc blende GaAs nanowires with controlled wurtzite inclusions. The shell grows on the zinc blende phase, but its growth is hindered on the wurtzite crystal phase. Nucleation of InAs occurs exclusively on the zinc blende GaAs regions. The wurtzite segments are placed inside self-catalyzed GaAs nanowires by partially consuming and refilling the Ga droplet. The crystal phase selective growth of InAs on the side facets of the GaAs nanowires is explained by the local environment of each new In atom. Because of unbalanced neighbors on the wurtzite side facets, the growth of a highly lattice mismatched material is hindered. This happens not only on the wurtzite segments, but also on regions being characterized by a high density of twins
Controlled wurtzite inclusions in self-catalyzed zinc blende III–V semiconductor nanowires
The control of the Ga droplet during the MBE growth and its impact on the crystal structure of self-catalyzed GaAs nanowires (NWs) were investigated. The consumption of the droplet proceeds in two steps. First, the contact angle decreases to 90° keeping the NW diameter constant. The crystal structure changes from zinc blende (ZB) to wurtzite (WZ). Then, the contact angle keeps constant while the top radius of the NW decreases and the NW grows again in ZB configuration. During the last step, {110}, {211}B and {100} facets develop at the top. Calculations show that the Ga desorption from the droplet has to be taken into account during its consumption. With this information, several WZ segments of different lengths were placed into ZB GaAs NWs via partial droplet consumption. For this purpose, we supplied As and Ga separately, in order to partially consume and refill the Ga droplet. The same mechanism was applied to self-catalyzed InAs NWs resulting in short WZ segments inserted in a ZB twinning superlattice
Molecular Beam Epitaxy Growth of GaAs/InAs Core-Shell Nanowires and Fabrication of InAs Nanotubes
Ga-assisted MBE growth of GaAs nanowires using thin HSQ layer
We present detailed results about the molecular beam epitaxy (MBE) growth of GaAs nanowires (NWs) on GaAs (111)B substrates prepared for the growth by a new method using hydrogen silsesquioxane (HSQ). Before the growth, HSQ is converted to SiOx by thermal treatment. The NWs are grown via the vapor–liquid–solid (VLS) mechanism. The influence of five growth parameters are described: SiOx thickness, growth time, substrate temperature and Ga and As4 beam fluxes. It is shown that the nanowire density can be tuned by two orders of magnitude by adjusting the SiOx thickness. Additionally, the results demonstrate that the axial growth is controlled by the As4 beam flux whereas the lateral growth is controlled by the Ga beam flux. The observed NW tapering is mainly determined by the V/III beam flux ratio. Our study gives important information about the VLS growth mechanism, which is extended by considering the secondary adsorption process of Ga adatoms. The nanowires have predominantly zinc blende crystal structure with rotational twins. A wurtzite segment is always found at the top of the NWs being associated with the growth after the Ga shutter has been closed
- …