17 research outputs found
Low dose inflammatory potential of silica particles in human-derived THP-1 macrophage cell culture studies - Mechanism and effects of particle size and iron.
Silica and iron are major constituents in ambient particulate matter, and iron is a common impurity in many engineered nanomaterials. The purpose of this work was to determine the pro-inflammatory and other biological effects and mechanism of particle size and iron presence under low dose, non-cytotoxic conditions that are likely to approximate actual exposure levels, in contrast with higher dose studies in which cytotoxicity occurs. Specifically, human-derived THP-1 macrophages were exposed to 1 μg/ml of pristine and iron-coated 50 nm and 2 μm engineered silica nanoparticles. Particles were first characterized for size, size distribution, surface area, iron concentration, phase and aggregation in cell culture media. Then, biological assays were conducted to determine a non-lethal dose used in subsequent experiments. Superoxide production, lipid peroxidation, and increased pro-inflammatory cytokine (TNF-α and IL-1β) mRNA expression were measured as a function of particle size and iron presence. Smaller particle size and the presence of iron increased superoxide production, lipid peroxidation, and the induction of pro-inflammatory cytokine mRNA expression. Separate addition of an iron-chelator, a scavenger of superoxide and hydrogen peroxide, and an inhibitor of phosphatidylcholine specific phospholipase C (PC-PLC), suppressed the increase in cytokine mRNA expression. Furthermore, free iron itself showed none of the aforementioned effects. The results highlight the importance of particle size and iron in lung inflammation for both natural and engineered nanomaterials, under low dose, non-toxic conditions, and support the role of an oxidant, lipid peroxidation and PC-PLC dependent inflammatory mechanism
Delayed Nrf2-regulated antioxidant gene induction in response to silica nanoparticles.
Silica nanoparticles with iron on their surface cause the production of oxidants and stimulate an inflammatory response in macrophages. Nuclear factor erythroid-derived 2 - like factor 2 (Nrf2) signaling and its regulated antioxidant genes play critical roles in maintaining redox homeostasis. In this study we investigated the regulation of four representative Nrf2-regulated antioxidant genes; i.e., glutamate cysteine ligase (GCL) catalytic subunit (GCLC), GCL modifier subunit (GCLM), heme oxygenase 1 (HO-1), and NAD(P)H:quinone oxidoreductase-1 (NQO-1), by iron-coated silica nanoparticles (SiO2-Fe) in human THP-1 macrophages. We found that the expression of these four antioxidant genes was modified by SiO2-Fe in a time-dependent manner. At 6h, their expression was unchanged except for GCLC, which was reduced compared with controls. At 18h, the expression of these antioxidant genes was significantly increased compared with controls. In contrast, the Nrf2 activator sulforaphane induced all antioxidant genes at as early as 3h. The nuclear translocation of Nrf2 occurred later than that for NF-κB p65 protein and the induction of proinflammatory cytokines (TNFα and IL-1β). NF-κB inhibitor SN50 prevented the reduction of GCLC at 6h and abolished the induction of antioxidant genes at 18h by SiO2-Fe, but did not affect the basal and sulforaphane-induced expression of antioxidant genes, suggesting that NF-κB signaling plays a key role in the induction of Nrf2-mediated genes in response to SiO2-Fe. Consistently, SN50 inhibited the nuclear translocation of Nrf2 caused by SiO2-Fe. In addition, Nrf2 silencing decreased the basal and SiO2-induced expression of the four reprehensive antioxidant genes. Taken together, these data indicated that SiO2-Fe induced a delayed response of Nrf2-regulated antioxidant genes, likely through NF-κB-Nrf2 interactions
Surface characterization and chemical speciation of adsorbed iron(iii) on oxidized carbon nanoparticles.
Recommended from our members
Surface characterization and chemical speciation of adsorbed iron(iii) on oxidized carbon nanoparticles.
Carbonaceous nanomaterials represent a significant portion of ultra-fine airborne particulate matter, and iron is the most abundant transition metal in air particles. Owing to their high surface area and atmospheric oxidation, carbon nanoparticles (CNP) are enriched with surface carbonyl functional groups and act as a host for metals and small molecules. Using a synthetic model, concentration-dependent changes in the chemical speciation of iron adsorbed on oxidized carbon surfaces were investigated by a combination of X-ray and electron microscopic and spectroscopic methods. Carbon K-edge absorption spectra demonstrated that the CNP surface was enriched with carboxylic acid groups after chemical oxidation but that microporosity was unchanged. Oxidized CNP showed a high affinity for sorption of Fe(iii) from solution (75-95% uptake) and spectroscopic measurements confirmed a 3+ oxidation state of Fe on CNP irrespective of surface loading. The bonding of adsorbed Fe(iii) at variable loadings was determined by iron K-edge X-ray absorption spectroscopy. At low loadings (3 and 10 μmol Fe m-2 CNP), mononuclear Fe was octahedrally coordinated to oxygen atoms of carboxylate groups. As Fe surface coverage increased (21 and 31 μmol Fe m-2 CNP), Fe-Fe backscatters were observed at interatomic distances indicating iron (oxy)hydroxide particle formation on CNP. Electron-donating surface carboxylate groups on CNP coordinated and stabilized mononuclear Fe(iii). Saturation of high-affinity sites may have promoted hydroxide particle nucleation at higher loading, demonstrating that the chemical form of reactive metal ions may change with surface concentration and degree of CNP surface oxidation. Model systems such as those discussed here, with controlled surface properties and known chemical speciation of adsorbed metals, are needed to establish structure-activity models for toxicity assessments of environmentally relevant nanoparticles
Recommended from our members
Surface characterization and chemical speciation of adsorbed iron(iii) on oxidized carbon nanoparticles.
Carbonaceous nanomaterials represent a significant portion of ultra-fine airborne particulate matter, and iron is the most abundant transition metal in air particles. Owing to their high surface area and atmospheric oxidation, carbon nanoparticles (CNP) are enriched with surface carbonyl functional groups and act as a host for metals and small molecules. Using a synthetic model, concentration-dependent changes in the chemical speciation of iron adsorbed on oxidized carbon surfaces were investigated by a combination of X-ray and electron microscopic and spectroscopic methods. Carbon K-edge absorption spectra demonstrated that the CNP surface was enriched with carboxylic acid groups after chemical oxidation but that microporosity was unchanged. Oxidized CNP showed a high affinity for sorption of Fe(iii) from solution (75-95% uptake) and spectroscopic measurements confirmed a 3+ oxidation state of Fe on CNP irrespective of surface loading. The bonding of adsorbed Fe(iii) at variable loadings was determined by iron K-edge X-ray absorption spectroscopy. At low loadings (3 and 10 μmol Fe m-2 CNP), mononuclear Fe was octahedrally coordinated to oxygen atoms of carboxylate groups. As Fe surface coverage increased (21 and 31 μmol Fe m-2 CNP), Fe-Fe backscatters were observed at interatomic distances indicating iron (oxy)hydroxide particle formation on CNP. Electron-donating surface carboxylate groups on CNP coordinated and stabilized mononuclear Fe(iii). Saturation of high-affinity sites may have promoted hydroxide particle nucleation at higher loading, demonstrating that the chemical form of reactive metal ions may change with surface concentration and degree of CNP surface oxidation. Model systems such as those discussed here, with controlled surface properties and known chemical speciation of adsorbed metals, are needed to establish structure-activity models for toxicity assessments of environmentally relevant nanoparticles
Spatially Resolved Energy Electron Loss Spectroscopy Studies of Iron Oxide Nanoparticles
Recommended from our members
Low dose inflammatory potential of silica particles in human-derived THP-1 macrophage cell culture studies – Mechanism and effects of particle size and iron
Silica and iron are major constituents in ambient particulate matter, and iron is a common impurity in many engineered nanomaterials. The purpose of this work was to determine the pro-inflammatory and other biological effects and mechanism of particle size and iron presence under low dose, non-cytotoxic conditions that are likely to approximate actual exposure levels, in contrast with higher dose studies in which cytotoxicity occurs. Specifically, human-derived THP-1 macrophages were exposed to 1 μg/ml of pristine and iron-coated 50 nm and 2 μm engineered silica nanoparticles. Particles were first characterized for size, size distribution, surface area, iron concentration, phase and aggregation in cell culture media. Then, biological assays were conducted to determine a non-lethal dose used in subsequent experiments. Superoxide production, lipid peroxidation, and increased pro-inflammatory cytokine (TNF-α and IL-1β) mRNA expression were measured as a function of particle size and iron presence. Smaller particle size and the presence of iron increased superoxide production, lipid peroxidation, and the induction of pro-inflammatory cytokine mRNA expression. Separate addition of an iron-chelator, a scavenger of superoxide and hydrogen peroxide, and an inhibitor of phosphatidylcholine specific phospholipase C (PC-PLC), suppressed the increase in cytokine mRNA expression. Furthermore, free iron itself showed none of the aforementioned effects. The results highlight the importance of particle size and iron in lung inflammation for both natural and engineered nanomaterials, under low dose, non-toxic conditions, and support the role of an oxidant, lipid peroxidation and PC-PLC dependent inflammatory mechanism
Recommended from our members
Iron Speciation in Respirable Particulate Matter and Implications for Human Health
Particulate matter (PM) air pollution poses a major global health risk, but the role of iron (Fe) is not clearly defined because chemistry at the particle-cell interface is often not considered. Detailed spectromicroscopy characterizations of PM2.5 samples from the San Joaquin Valley, CA identified major Fe-bearing components and estimated their relative proportions. Iron in ambient PM2.5 was present in spatially and temporally variable mixtures, mostly as Fe(III) oxides and phyllosilicates, but with significant fractions of metallic iron (Fe(0)), Fe(II,III) oxide, and Fe(III) bonded to organic carbon. Fe(0) was present as aggregated, nm-sized particles that comprised up to ∼30% of the Fe spectral fraction. Mixtures reflect anthropogenic and geogenic particles subjected to environmental weathering, but reduced Fe in PM originates from anthropogenic sources, likely as abrasion products. Possible mechanistic pathways involving Fe(0) particles and mixtures of Fe(II) and Fe(III) surface species may generate hydrogen peroxide and oxygen-centered radical species (hydroxyl, hydroperoxyl, or superoxide) in Fenton-type reactions. From a health perspective, PM mixtures with reduced and oxidized Fe will have a disproportionate effect in cellular response after inhalation because of their tendency to shuttle electrons and produce oxidants and electrophiles that induce inflammation and oxidative stress
Endothelial cells derived from embryonic stem cells respond to cues from topographical surface patterns
Abstract The generation of micro- and nano-topography similar to those found in the extra cellular matrix of three-dimensional tissues is one technique used to recapitulate the cell-tissue physiology found in the native tissues. Despite the fact that ample studies have been conducted on the physiological significance of endothelial cells alignment parallel to shear stress, as this is the normal physiologic arrangement for healthy arterial EC, very few studies have examined the use of topographical signals to initiate endothelial cell alignment. Here, we have examined the ability for our mouse embryonic stem cell-derived endothelial cells (ESC-EC) to align on various microchip topographical systems. Briefly, we generated metal molds with ‘wrinkled’ topography using 1) 15 nm and 2) 30 nm of gold coating on the pre-strained polystryene (PS) sheets. After thermal-induced shrinkage of the PS sheets, polydimethylsiloxane (PDMS) microchips were then generated from the wrinkled molds. Using similar Shrink™-based technology, 3) larger selectively crazed acetone-etched lines in the PS sheets, and 4) fully crazed acetone-treated PS sheets of stochastic topographical morphology were also generated. The 15 nm and 30 nm gold coating generated ‘wrinkles’ of uniaxial anisotropic channels at nano-scaled widths while the crazing generated micron-sized channels. The ESC-EC were able to respond and align on the 320 nm, 510 nm, and the acetone-etched 10.5 μm channels, but not on the fully ‘crazed’ topographies. Moreover, the ESC-EC aligned most robustly on the wrinkles, and preferentially to ridge edges on the 10.5 μm-sized channels. The ability to robustly align EC on topographical surfaces enables a variety of controlled physiological studies of EC-EC and EC-ECM contact guidance, as well as having potential applications for the rapid endothelialization of stents and vascular grafts