7,075 research outputs found
Unitarity Quadrangles of Four Neutrino Mixing
We present a classification of the unitarity quadrangles in the four-neutrino
mixing scheme. We find that there are totally thirty-six distinct topologies
among twelve different unitarity quadrangles. Concise relations are established
between the areas of those unitarity quadrangles and the rephasing invariants
of CP and violation.Comment: RevTex 10 pages. Minor changes made. Accepted for publication in
Phys. Rev.
Automorphisms of surfaces of general type with q>=2 acting trivially in cohomology
A compact complex manifold X is said to be rationally cohomologically
rigidified if its automorphism group Aut(X) acts faithfully on the cohomology
ring H*(X,Q). In this note, we prove that, surfaces of general type with
irregularity q>2 are rationally cohomologically rigidified, and so are minimal
surfaces S with q=2 unless K^2=8X. This answers a question of Fabrizio Catanese
in part.
As examples we give a complete classification of surfaces isogenous to a
product with q=2 that are not rationally cohomologically rigidified. These
surfaces turn out however to be rigidified.Comment: 18 pages; a remark and a closely relevant reference are adde
Estimating the non-commercial-commercial feed gap in China and its impact on future world demand for soybeans
Two effects simultaneously shape the future soybean meal (SBM) demand in China: the income effect on meat consumption and the transition effect on feed usage in animal production. The income effect has been studied intensively by previous researchers, and more animal products are believed to be consumed. The transition effect, however, has yet received enough attention. This study shows that transition effect is more important in determining China???s future derived demand for SBM than income effect. Future soybean demand in China is predicted based on both effects till 2030
Modelling and simulation of the laboratory low temperature proton exchange membrane and direct methanol fuel cells
PhD ThesisProton exchange membrane fuel cells (PEMFCs) are promising candidates as power sources due to their high energy conversion efficiency, power density and low pollutants emission. Water management is of vital importance to achieve maximum performance and durability from PEMFCs. The main object of this work was to develop a mathematic model to better understand the water transport in PEMFCs under practical conditions. The aim is to enhance the output power of fuel cells by establishing effective water removal and distribution strategies.
A single-phase flow, along the channel, isothermal model of a PEMFC is developed and validated against experimental data. Reactant flow and diffusion are simulated using the Navier-Stokes equation and Maxwell-Stefan equation, respectively. Water transport through the membrane is described by the combinational mechanism in which electro-osmotic drag, back diffusion and hydraulic permeation are all included. Agglomerate assumption is applied for the catalyst layer structure. This model is used to study the effects of the catalyst layer properties on cell performance. The model indicates that the rapid decrease in current density at lower cell voltage is due to an increased oxygen diffusion resistance through the ionomer film.
A two-phase flow, across the channel, isothermal model is developed. The water phase transfers between water vapour, dissolved water and liquid water are taken into account and liquid water formation and transport are introduced. Liquid water occupies the secondary pores of the cathode catalyst layer to form a liquid water film on the outer boundary of the ionomer film. This model is used to study the influence of catalyst layer parameters and operating conditions on the cell performance. The model provides useful guidance for optimisation of the ionomer volume fraction in the cathode catalyst layer and the relative humidity of the cathode gas inlet.
A two-phase flow, across the channel, non-isothermal model is developed. The model considered the non-uniform temperature distribution within the fuel cell. The modelling results show that heat accumulates within the cathode catalyst layer under the channel. Higher operating temperatures improved the fuel cell performance by increasing the kinetic rate, reducing the liquid water saturation on the cathode and
increasing the water carrying capacity of the anode gas. Applying higher temperature on the anode and enlarging the width ratio of the channel/rib could improve the cell performance.
A multi-variable optimisation of the cathode catalyst layer composition is represented by a surrogate modelling. Five design parameters, platinum loading, platinum mass ratio, ionomer volume fraction, catalyst layer thickness and agglomerate radius, are optimised by a multiple surrogate model and their sensitivities are analysed by a Monte Carlo method based approach. Two optimisation strategies, maximising the current density at a fixed cell voltage and within a specific range, are implemented for the optima prediction. At higher current densities, cell performance is improved by reducing the ionomer volume fraction and increasing the catalyst layer porosity.
The one-dimensional, isothermal, time dependent and steady state models for the anode of a direct methanol fuel cell (DMFC) are developed. The two models are based on the dual-site mechanism, in which the coverage of intermediate species of methanol, OH and CO on the surface of platinum and ruthenium are included. Both the effect of operating conditions and electrode parameters are investigated. The distributions of methanol concentration and overpotential inside the electrode are represented and the current densities predicted by the intrinsic and macro kinetics are compared.
From the analysis of the different models developed in this thesis, the main results can be summarised as: (1) Mass transport resistance resulted from the oxygen diffusion through the ionomer film surrounding the agglomerate is the main reason for the rapid fall of current density at lower cell voltage. (2) Ionomer swelling has a significant effect on fuel cell performance because it resulted in a decrease in the porosity and an increase in the ionomer film thickness, leading to an increase in the oxygen transport resistance. (3) Catalyst layer composition has a vital impact on the utilisation of the platinum catalyst and cell performance. (4) Heat accumulates within the cathode catalyst layer under the channel. Applying higher temperatures on the anode optimises the temperature distribution within the MEA and improves the cell performance. (5) Cell performance is improved by enlarging the width ratio of channel/rib. However, the improvement is limited by the sluggish oxygen reduction reaction. (6) For the methanol oxidation reaction in a Pt-Ru anode, the intrinsic current density is determined by the coverage ratios of the intermediate species. The structure and property of the electrode also play an important role in determining the anode performance of a DMFC.EPSR
Development of Nanosphere Lithography for Semiconductor Device Applications
Nanosphere lithography, a technique of generating hexagonally packed monolayers with nanospheres, has been studied and been shown to increase the efficiency of the devices such as light emitting diodes and solar cells. In this research, the fabrication of nanosphere lithography was explored with the aim of identifying robust deposition methods. Two resultant methods yielded large (1 cm by 1 cm) monolayers of nanospheres, with further mask modification via sphere diameter reduction using reactive ion etch. Photoluminescence (PL) measurements confirmed the existence of the monolayer and the enhancement due to the addition of nanospheres. A thin layer of aluminum was deposited onto samples after performing nanosphere lithography, with the nanospheres subsequently lifted off to create various aluminum structures. Finite-difference time-domain simulations were conducted to compare with PL data. Additional experiments and processes, such as the ones that create localized surface plasmon, nano-dots, etc., are outlined for future work
- …