Development of Neural Stem Cell-Based Therapies for Parkinson’s Disease

Neural stem cell (NSC)-based therapies, such as cell transplantation, are an emerging strategy for restoring neuronal function in Parkinson’s disease (PD), which is characterized by a profound and selective loss of nigrostriatal dopaminergic (DA) neurons. Advanced researches on the microenvironment of grafted cells will promote clinical applications of NSCs for neurological disorders. A novel cell culture model of the neurovascular network was therefore devised to investigate autocrine, paracrine, and juxtacrine signaling in the neurovascular unit generated by NSCs and vascular endothelial cells. Preclinical studies using cutting-edge technologies, including cellular reprogramming, advancement in scaffolds for brain tissue engineering, image-guided injection, and noninvasive monitoring of tissue regeneration will pave the way for successful clinical trials of NSC-based therapies for PD. Once the implanted or regenerated DA neurons are integrated into the existing nigrostriatal DA pathway, the symptoms of PD can potentially be alleviated by reversing characteristic neurodegeneration

Reduced Health-Related Quality of Life in Body Constitutions of Yin-Xu, and Yang-Xu, Stasis in Patients with Type 2 Diabetes: Taichung Diabetic Body Constitution Study

Aim. To evaluate how health-related quality of life (HRQOL) and traditional Chinese medicine (TCM) constitutions of Yin-Xu, Yang-Xu, and Stasis are related in type 2 diabetes patients. Method. Seven hundred and five subjects were recruited in 2010 for this study from a Diabetes Shared Care Network in Taiwan. Generic and disease-specific HRQOL were assessed by the short form 36 (SF-36) and the diabetes impact measurement scale (DIMS). Constitutions of Yin-Xu, Yang-Xu, and Stasis were then assessed by the body constitution questionnaire (BCQ), a questionnaire consisting of 44 items that evaluate the physiological state based on subjective symptoms and signs. Results. Estimated effects of the Ying-Xu and Stasis on all scales of the SF-36 were significantly negative, while estimated effects of the Yang-Xu on all scales (except for SF, RE, MH, and MCS) were significantly negative. For DIMS, the estimated effects of the Ying-Xu and Stasis on all scales were significantly negative except for Stasis on well-being, while Yang-Xu has a significantly negative effect only on symptoms. Conclusions. This study demonstrates that TCM constitutions of Yin-Xu, Yang-Xu, and Stasis are closely related to a reduction in HRQOL. These findings support the need for further research into the impact of intervention for TCM constitutions on HRQOL in patients with type 2 diabetes

THE BIOMECHANICAL ANALYSIS OF THE TAEKWONDO FRONT-LEG AXE-KICK

The purpose of the study was to analyze the biomechanics of taekwondo front-leg axekick. One force plates, two synchronized high-speed cameras were used to measure biomechanical parameters in each phase of the front-leg axe-kick. The results included: 1. The average reaction time and movement time were 0.423 sand 0.327 s, which respectively occupied about 56% and 44% of attack time. 2. The maximum velocity of hip, knee and ankle were 1.74 m/s, 5.25 m/s and 7.43 m/s respectively. When the kicking leg touched the target, the velocity of knee and ankle were 0.78m/s, 1.72m1s, and 4.64m1s respectively. 3. The peak vertical GRF and impulse were 0.96 SW and 77.57N-s. For decreasing the movement time, it's suggested that an athlete should increase the power and flexibility of lower extremities during the training section

A Microcantilever-based Gas Flow Sensor for Flow Rate and Direction Detection

The purpose of this paper is to apply characteristics of residual stress that causes cantilever beams to bend for manufacturing a micro-structured gas flow sensor. This study uses a silicon wafer deposited silicon nitride layers, reassembled the gas flow sensor with four cantilever beams that perpendicular to each other and manufactured piezoresistive structure on each micro-cantilever by MEMS technologies, respectively. When the cantilever beams are formed after etching the silicon wafer, it bends up a little due to the released residual stress induced in the previous fabrication process. As air flows through the sensor upstream and downstream beam deformation was made, thus the airflow direction can be determined through comparing the resistance variation between different cantilever beams. The flow rate can also be measured by calculating the total resistance variations on the four cantilevers.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/handle/2042/16838

Inhibition of gap junctional Intercellular communication in WB-F344 rat liver epithelial cells by triphenyltin chloride through MAPK and PI3-kinase pathways

<p>Abstract</p> <p>Background</p> <p>Organotin compounds (OTCs) have been widely used as stabilizers in the production of plastic, agricultural pesticides, antifoulant plaints and wood preservation. The toxicity of triphenyltin (TPT) compounds was known for their embryotoxic, neurotoxic, genotoxic and immunotoxic effects in mammals. The carcinogenicity of TPT was not well understood and few studies had discussed the effects of OTCs on gap junctional intercellular communication (GJIC) of cells.</p> <p>Method</p> <p>In the present study, the effects of triphenyltin chloride (TPTC) on GJIC in WB-F344 rat liver epithelial cells were evaluated, using the scrape-loading dye transfer technique.</p> <p>Results</p> <p>TPTC inhibited GJIC after a 30-min exposure in a concentration- and time-dependent manner. Pre-incubation of cells with the protein kinase C (PKC) inhibitor did not modify the response, but the specific MEK 1 inhibitor PD98059 and PI3K inhibitor LY294002 decreased substantially the inhibition of GJIC by TPTC. After WB-F344 cells were exposed to TPTC, phosphorylation of Cx43 increased as seen in Western blot analysis.</p> <p>Conclusions</p> <p>These results show that TPTC inhibits GJIC in WB-F344 rat liver epithelial cells by altering the Cx43 protein expression through both MAPK and PI3-kinase pathways.</p

Stability evaluation of inactivated influenza H7N9 vaccines derived from adhesion and suspension MDCK cells

In recent years, cell-based manufacturing processes for influenza vaccine production has gained a great interest over the egg-based process. We have adapted MDCK cells to grow in chemical-defined medium and found this newly suspension MDCK cell line (sMDCK cells) is very suitable for the production of influenza virus. However, the property of purified antigens from sMDCK cells remains unclear. In this study, a stability program of influenza H7N9 vaccine (NIBRG268 vaccine strain) produced by sMDCK cells was investigated, and the data were compared with the vaccine derived from adhesion MDCK (aMDCK) cells in serum-free medium. The H7N9 bulks (with different storage time) derived from sMDCK and aMDCK cells were stored at 2-8°C for some times, and a number of parameters were used to monitor the H7N9 vaccine antigen stability was evaluated at different periods (1, 2, 3 and 6 months). The monitoring parameters are including virus structure, HA titer, HA content, total protein level, antigenicity, and immunogenicity. The sMDCK-derived H7N9 bulk showed similar virus structure to that aMDCK-derived H7N9 bulk, and there was no obvious change after further 6 months of storage. Furthermore, HA titer, HA content and total protein level of sMDCK- and aMDCK-derived H7N9 bulks were stable after 6 months of storage. sMDCK- and aMDCK-derived H7N9 bulks displayed similar antigenicity detected by hemagglutination inhibition (HI) test using standard serum. Finally, the results of HI and neutralization tests showed that sMDCK- and aMDCK-derived H7N9 vaccines were similar in immunogenicity in BALB/c mice vaccinated with 0.2 μg of H7N9 vaccine with an adjuvant of aluminum hydroxide. These results indicate that sMDCK-derived H7N9 bulk has good stability data similar to the aMDCK-derived H7N9 bulk. Thus, the newly developed suspension MDCK cells show a great market potential over the traditional vaccine manufacturing methods