The temperature fields in electrically heated wires at crisis of boiling

The self-organization processes take place in several phenomena and physical objects and in particular they arise in metals in conditions of charge transfer. At liquid helium temperature in conditions of the increase of direct current flowing through bismuth, indium and tungsten there arise unstabilities of charge carries flux and this process exhibits itself in electromagnetic oscillations generation. This instability the authors refer to the mutual influence of the current flowing through the sample and magnetic field of the current. With this heat flux density through the sample’s surfaces didn’t exceed 0.1 W/sm2. Such a value of heat flux is сlose to the first boiling crisis but the author state that the nature of these phenomena is no case is connected with the heat removal specific features

Optical transparency and local electronic structure of Yb-doped Y 2 O 3 ceramics with tetravalent additives

The results of optical transmission and X-ray core-level spectra measurements of Yb:Y 2 O 3 ceramics with different tetravalent sintering additives (ZrO 2 , CeO 2 and HfO 2 ) fabricated from nanopowders (produced by the laser ablation method) and then annealed at 1400 °C in air for 2 h are presented. It is found that the transmission values for ZrO 2 - and HfO 2 -doped ceramics at the lasing wavelengths are higher than those of CeO 2 -doped samples. The X-ray photoelectron spectra (XPS) O 1s spectra show that the relative intensity of oxygen defect peak detected for 3Yb:Y 2 O 3 + 5CeO 2 ceramics decreases substantially and consistently compared to that of 5Yb:Y 2 O 3 + 5HfO 2 and 3Yb:Y 2 O 3 + 5ZrO 2 samples. This can be attributed to a more complete filling of oxygen vacancies due to annealing-induced oxygen diffusion into the highly defective sintered ceramics. The measurements of XPS Ce 3d spectra showed that the insufficiently complete filling of the oxygen vacancies in the 3Yb:Y 2 O 3 + 5CeO 2 compound is due to the appreciable presence of trivalent cerium ions. © 2019 by the authors.Ministry of Education and Science of the Russian Federation, Minobrnauka: 3.7270.2017/8.9This study was supported by FASO (Theme "Electron" No. AAAA-A18-118020190098-5). The XPS measurements were supported by the Ministry of Education and Science of the Russian Federation (Project No. 3.7270.2017/8.9) and the Government of the Russian Federation (Act 211, agreement No. 02.A03.21.0006). Fabrication of ceramic samples was performed in the framework of the state task of IEP UB RAS

The use of atomic force microscopy for structural and surface morphological analysis of Fanconi anemia patient fibroblasts before and after exposure to γ-radiation

The surface morphological changes of Fanconi anemia patient fibroblasts after exposure to γ–radiation were investigated by AFM and foci immunofluorescence staining. The reorganization of the actin cytoskeleton was found, having resulted in reduction of the membrane stiffness and increase of adhesion in nuclear and lamellipodial regions of the cell

CuO-CeO2 nanocomposite catalysts produced by mechanochemical synthesis

Mechanochemical synthesis based on ball-milling of individual oxides was applied as a one-step preparation technique for CuO-CeO2 catalyst for preferential CO oxidation in H2 excess. The mechanical energy dose transferred to the original powder mixture determines both the catalyst composition and activity. It is found that after 90 min of milling (corresponding to a dose of 372 kJ mol-1), a mixture of 10 wt.% CuO-CeO2 powder exhibits a CO conversion of 97% at 423 K. Four active oxygen states, which are not observed in case of pure CeO2, were detected in the nanocomposite lattice and attributed to the presence of Cu in surface sites as well as in subsurface bulk sites of CeO2, in nearest neighbor and next nearest neighbor positions. Correspondingly, oxidation of CO to CO2 was found to occur in a two-stage process with Tmax = 395/460 K, and oxidation of H2 to H2O likewise in a four-stage process with Tmax = 426/448/468/516 K. The milled powder consists of CeO2 crystallites sized 8-10 nm agglomerated to somewhat larger aggregates, with CuO dispersed on the surface of the CeO2 crystallites, and to a lesser extent present as Cu2O. © 2019 Author(s).This work was partially supported by Russian Foundation for Basic Research [Projects n.n. 16-03-00330a and 16-03-00178a] in theoretical studies and part of experimental research and by FASO [program no. AAAA-A18-118012390374-3]. XPS measurements were supported by FASO (Theme “Electron”). The Alexander von Humboldt foundation is gratefully acknowledged for funding. We also would like to thank N. Berezkina for SEM measurements. We acknowledge support by the Open Access Publication Funds of the Göttingen University. Declarations of interest: none

The structure of Green functions in quantum field theory with a general state

In quantum field theory, the Green function is usually calculated as the expectation value of the time-ordered product of fields over the vacuum. In some cases, especially in degenerate systems, expectation values over general states are required. The corresponding Green functions are essentially more complex than in the vacuum, because they cannot be written in terms of standard Feynman diagrams. Here, a method is proposed to determine the structure of these Green functions and to derive nonperturbative equations for them. The main idea is to transform the cumulants describing correlations into interaction terms.Comment: 13 pages, 6 figure

Cu-Site Disorder in CuAl2O4 as Studied by XPS Spectroscopy

The results of full study of X-ray photoelectron spectra (XPS) of spin-liquid candidate CuAl2O4 including the measurements of high-energy resolved core level (Cu 2p, Al 3p, O 1s), Cu LMM Auger and valence band spectra are presented. The comparison of obtained results with spectra of reference samples and specially performed density functional theory calculations has confirmed a finite Cu site-disorder in CuAl2O4, where about 30% of Cu2+ ions occupy the octahedral sites. Obtained valence band spectra can be used in further theoretical studies aimed on the investigation of electronic and magnetic properties of this mysterious ma-terial. © 2021, The Author(s).The DFT calculations were supported by the Russian Science Foundation (project no. 20-62-46047). The XPS measurements were supported by the Ministry of Science and Higher Education of the Russian Federation (theme Electron no. AAAA-A18-118020190098-5 and project FEUZ 2020-0060). I.S. Zhidkov acknowledges the support of the Council of the President of the Russian Federation for State Support of Young Scientists and Leading Scientific Schools (project no. MK-989.2020.2)

Anti-inflammatory and immunomodulating effects of the bacterial lysate in the <em>in vivo</em> models of aseptic lymphadenitis and pneumococcal pneumonia

Bacterial lysates may produce immunoregulatory effects in the inflammatory diseases that are not directly caused by infectious agents; they may also stimulate the immune response against pathogens which are not a part of the lysate composition. Imudon® is a polyvalent bacterial lysate that is available in orodispersible tablets. However, the influence of this drug product on aseptic inflammation and immune defense against the infectious agents, the antigens of which are not contained in this preparation have not been studied so far. The aim of this study, therefore, was to determine the anti-inflammatory and immunomodulating effects of Imudon® using the models of aseptic lymphadenitis (in Wistar rats) and pneumococcal pneumonia (in Balb/c mice), i.e., the conditions not related to the specific components of the bacterial lysate. Lymphadenitis was induced in rats by administration of λ-carrageenan into a cervical lymph node via an open operative approach. Whereas pneumonia was induced in mice by administering Streptococcus pneumoniae suspension intranasally. The choice of pneumococcus was determined by the absence of pneumococcal antigens in Imudon®, i.e., it cannot be a direct inducer of adaptive immune response against pneumococcal infection. Imudon® was administered intragastrically as a crushed tablet suspension following a therapeutic-preventive regimen (for 14 days daily until the induction of inflammation and for 3 [in the lymphadenitis model] or 5 days [in the model of pneumonia] in three doses thereafter). In the lymphadenitis model, Imudon® demonstrated both local and systemic anti-inflammatory responses manifested in the reduced number of circulating leucocytes and lower TNFα levels and by ameliorated histological features of inflammation in the operated lymph node. In rats, the anti-inflammatory effect was most pronounced when the product was administered at a dose of 2.2 mg/kg (equivalent to a human therapeutic dose) and 6.6 mg/kg. In the model of pneumonia, administration of Imudon® at 4.44 mg/kg (equivalent to a human therapeutic dose) and 13.32 mg/kg demonstrated a trend towards increased survival rate as compared to the control group. On Day 5 after infection Imudon® (4.44 and 13.32 mg/kg) decreased significantly the severity of inflammation and bacterial titer in the lungs. The titer of anti-pneumococcal immunoglobulins A in the bronchoalveolar lavage fluid were found to be higher in the Imudon® treated group (13.32 mg/kg) compared to control group. The results of this study showed high antiinflammatory and immunomodulatory activities of Imudon® and provided an insight into the mechanisms that underlie the clinical effects of this drug in various inflammatory diseases

The Photochemical Stability of PbI2 and PbBr2: Optical and XPS and DFT Studies

We investigated the photochemical stability of PbX2 (X = I and Br) halides by optical and X-ray photoelectron spectroscopy (XPS). The optical absorbance displayed a strong reduction for PbI2 with light soaking and permanent behavior for PbBr2. The XPS survey spectra showed a sharp drop in the I:Pb ratio for PbI2 from 1.63 to 1.14 with exposure time from 0 to 1000 h while for PbBr2, it remains practically unchanged (1.59–1.55). The measurements of the XPS Pb 4f and Pb 5d spectra have shown the partial photolysis of PbI2 with the release of metallic lead whereas PbBr2 demonstrated remarkable photochemical stability. According to the density functional theory (DFT), calculations of the metal and iodide vacancy formation energies for PbBr2 are higher than for PbI2 which confirms the better stability to light soaking. The high photochemical stability of PbBr2 means that it can be used as excess under MAPbBr3 perovskite synthesis to improve not only the power conversion efficiency but also stability to light soaking. © 2023 by the authors.Russian Foundation for Basic Research, РФФИ: 21-52-52002; Ministry of Education and Science of the Russian Federation, Minobrnauka: AAAA-A18-118020190098-5, FEUZ-2023-0013; Fédération pour la Recherche sur le Cerveau, FRC: 0089-2019-0010/AAAA-A19-119071190044-3This work was supported by the Ministry of Science and Higher Education of the Russian Federation under the theme “Electron” No. AAAA-A18-118020190098-5 and Project FEUZ-2023-0013. The XPS measurements were supported by the Russian Foundation for Basic Research (Project No. 21-52-52002). Sample preparation was supported at FRC PCP MC RAS by the Ministry of Science and Higher Education of the Russian Federation (Project No. 0089-2019-0010/AAAA-A19-119071190044-3)