2,309 research outputs found
Force, relative-displacement, and work networks in granular materials subjected to quasistatic deformation
To describe the heterogeneous nature of stress transmission in granular materials, the concept of the “strong” network consisting of contacts with large normal forces has been proposed by Radjaï et al. [Phys. Rev. Lett. 80, 61 (1998)]. The shear stress is mainly determined by this strong network. The dual viewpoint is adopted here, by not only considering the forces at contacts, but also the deformation. It is shown that the strain increments are determined by the tangential component of the relative displacements at the contacts. A “mobile” network consisting of contacts with large tangential relative displacements is defined that primarily accounts for the strain increments. The investigation of the relation between the strong and the mobile networks shows that these networks are largely unrelated. An alternative network is defined that consists of contacts at which the contribution to the work input is large. It is found that this work input occurs primarily through the tangential forces and tangential relative displacements
Micro-mechanical analysis of deformation characteristics of three-dimensional granular materials
The deformation characteristics of idealized granular materials have been studied from the micro-mechanical viewpoint, using Bagi’s three-dimensional micro-mechanical formulation for the strain tensor [Bagi, K., 1996. Mechanics of Materials 22, 165–177]. This formulation is based on the Delaunay tessellation of space into tetrahedra. The set of edges of the tetrahedra can be divided into physical contacts and virtual contacts between particles. Bagi’s formulation expresses the continuum, macro-scale strain as an average over all edges, of their relative displacements (between two successive states) and the complementary-area vectors. This latter vector is a geometrical quantity determined from the set of edges, i.e. from the structure of the particle packing.\ud
\ud
Results from Discrete Element Method simulations of isotropic and triaxial loading of a three-dimensional polydisperse packing of spheres have been used to investigate statistics of the branch vectors and complementary-area vectors of edges (subdivided into physical and virtual contacts) and of the relative displacements of edges. The investigated statistics are probability density functions and averages over groups of edges with the same orientation. It is shown that these averages can be represented by second-order Fourier series in edge orientation.\ud
\ud
Edge orientations are distributed isotropically, contrary to contact orientations. The average lengths of the branch vectors and the normal component of the complementary-area vectors are distributed isotropically (with respect to the edge orientation) and their average values are related to each other and to the volume fraction of the assembly. The other two components of the complementary-area vector are zero on average.\ud
\ud
The total deformation of the assembly, as given by the average of the relative displacements of the edges of the Delaunay tessellation follows the uniform-strain prediction. However, neither the deformation of the physical contact network nor of the virtual contact network has this property. The average relative displacement of physical edges in the normal direction (determined by the branch vector) is smaller than that according to the uniform-strain assumption, while that of virtual contacts is larger. This is caused by the high interparticle stiffness that hinders compression. The reverse observation holds for the tangential component of the relative displacement vector. The contribution of the deformation of the empty space between physical contacts to the continuum, macro-scale strain tensor is therefore very important for the understanding and the prediction of the macro-scale deformation of granular materials
A superelement-based method for computing unsteady three-dimensional potential flows in hydraulic turbomachines
A numerical method is presented for the computation of unsteady, three-dimensional potential flows in hydraulic pumps and turbines. The superelement method has been extended in order to eliminate slave degrees of freedom not only from the governing Laplace equation, but also from the Kutta conditions. The resulting superelement formulation is invariant under rotation. Therefore the geometrical symmetry of the flow channels in the rotor can be exploited. This makes the method especially suitable to performing fully coupled computations of the unsteady flow phenomena in both rotor and stator, the so-called rotor-stator interaction. \ud
The developed numerical method is used to simulate the unsteady flow in an industrial mixed-flow pump. Two types of simulation are considered: one in which unsteady wakes behind the trailing edges of the rotor blades are taken into account and one in which these are neglected. Results are given that show the importance of unsteady flow phenomena. However, the computed head-capacity curve is hardly influenced by whether or not unsteady wakes are taken into account
Micromechanical study of elastic moduli of loose granular materials
In micromechanics of the elastic behaviour of granular materials, the macro-scale continuum elastic moduli are expressed in terms of micro-scale parameters, such as coordination number (the average number of contacts per particle) and interparticle contact stiffnesses in normal and tangential directions. It is well-known that mean-field theory gives inaccurate micromechanical predictions of the elastic moduli, especially for loose systems with low coordination number. Improved predictions of the moduli are obtained here for loose two-dimensional, isotropic assemblies. This is achieved by determining approximate displacement and rotation fields from the force and moment equilibrium conditions for small sub-assemblies of various sizes. It is assumed that the outer particles of these sub-assemblies move according to the mean field. From the particle displacement and rotation fields thus obtained, approximate elastic moduli are determined. The resulting predictions are compared with the true moduli, as determined from the discrete element method simulations for low coordination numbers and for various values of the tangential stiffness (at fixed value of the normal stiffness). Using this approach, accurate predictions of the moduli are obtained, especially when larger sub-assemblies are considered. As a step towards an analytical formulation of the present approach, it is investigated whether it is possible to replace the local contact stiffness matrices by a suitable average stiffness matrix. It is found that this generally leads to a deterioration of the accuracy of the predictions. Many micromechanical studies predict that the macroscopic bulk modulus is hardly influenced by the value of the tangential stiffness. It is shown here from the discrete element method simulations of hydrostatic compression that for loose systems, the bulk modulus strongly depends on the stiffness ratio for small stiffness ratios
Technologies in computerized lexicography
Since the early eighties, computer technology has become increasingly relevant to lexicography. Computer science will probably not be the only technological discipline which may have implications for future computerized lexicography. Some developments in the fields of language technology, information technology and knowledge engineering, may support lexicographical practice and enhance the quality of the resulting dictionary. The present paper discusses how the analysis and interpretation of electronic corpus data by the lexicographer may be improved by automatic linguistic analysis, by better access to the corpus, and by a more flexible communication with the computer system. As a frame of reference, first an indication of the state of the art in computerized lexicography will be given, by a concise discussion of three projects at the Institute for Dutch Lexicology INL considered in an international context: the conversion of the Woordenboek der Nederlandsche Taal WNT (Dictionary of the Dutch Language Based on Historical Principles) to electronic form, the compilation of the Vroegmiddelnederlands Woordenboek (Dictionary of Early Middle Dutch) in a computerized lexicographer's workbench, and the INL Taalbank (INL Language Database). Although the topic of this paper is technology, focus is on functional rather than technical aspects of computerized lexicography.Keywords: computerized lexicography, electronic dictionary, electronic text corpus, lexicographer's workbench, integrated language database, automatic linguistic analysis, information retrieval, user interfac
On hypo-elastic analogues of the dilatant double-sliding model
The relation between the hypo-elastic constitutive law and Mehrabadi and Cowin's dilatant double-sliding model for cohesionless granular materials is studied. Conditions that must be satisfied by hypo-elastic analogues of the double-sliding model are derived constructively, and a simple example is given
- …