15 research outputs found
Stabilization of convective instability in micropolar fluid model by feedback control strategy subjected to internal heat source
This investigation reports on a stability analysis of Rayleigh-Benard convection in a horizontal of micropolar fluid layer heated from below. The effect of a feedback control strategy on the onset of steady convection in the presence of internal heat source is investigated theoretically using Galerkin technique. The eigenvalues are obtained for free-free, rigid-rigid, free-rigid boundary combination with isothermal temperature boundary condition. The influence of various micropolar parameters on the onset of convection has also been analyzed. The onset of motion is found to depend on the feedback control parameter, K and internal heat source, Q and the micropolar parameter Ni
The stability of soret induced convection in doubly diffusive fluid layer with feedback control
Linear stability analysis is performed to study the Soret induced convection in a doubly diffusive fluid layer heated from below. The effect of a feedback control on the onset of steady convection is investigated theoretically using Galerkin technique. The eigenvalues are obtained for Free-Free, Rigid-Rigid, Rigid-Free boundaries combined with isothermal temperature boundary condition. The influence of various doubly diffusive parameters on the onset of convection has also been analyzed. It is found that the onset of motion can be stabilized by using the feedback control in all cases
Rayleigh-Benard convection in micropolar fluid with feedback control effect
The effect of feedback control on the criterion for the onset of Rayleigh-Benard convection in a horizontal micropolar fluid layer is studied theoretically. The bounding surfaces of the liquid are considered to either rigid on the upper and lower boundaries or upper boundary free and lower boundary rigid. A linear stability analysis is used and the Galerkin method is employed to find the critical stability parameters numerically. It is found that the onset of instability can be delayed through the use of feedback control
Effect of internal heat generation on Benard-Marangoni convection in micropolar fluid with feedback control
The effect of uniform distribution of internal heat generation on the linear stability analysis of the Benard-Marangoni convection in an Eringen's micropolar fluids with feedback control is investigated theoretically. The upper free surface is assumed to be non-deformable and the lower boundary is taken to be rigid and isothermal with fixed temperature and span-vanishing boundaries. The eigenvalue is solved numerically using the Galerkin method. The influence of the internal heat generation; Q and feedback control; K in micropolar fluids with various parameters on the onset of stationary convection has been analysed
Coriolis force in a nanofluid layer in the presence of Soret effect
The influence of coriolis force on the onset of steady Rayleigh-Benard convection subjected to Soret parameter in a horizontal nanofluid layer is considered analytically. The confined lower and upper boundary conditions of the nanofluid layer are considered to be free-free, rigid-free and rigid-rigid respectively. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis diffusion. Following the usual linear stability theory, the eigenvalue solution is obtained numerically by using Galerkin technique. From the investigation, the presence of coriolis force due to the rotation inhibits the onset of convection in nanofluid layer and have a stabilizing effect. Further, the instability of the system get advanced with the increased values of the Soret parameter
Effect of rotation on the Rayleigh-Benard Convection in nanofluid layer with vertical magnetic field and internal heat source
Effect of rotation on the onset of Rayleigh-Benard convection in a horizontal nanofluid layer with vertical magnetic field and internal heat source is investigated. Linear stability analysis based upon normal mode method is employed to find solution of the horizontal nanofluid layer bounded between free-free, rigid-free and rigid-rigid boundaries. Rayleigh number has been determined using the galerkin method. Graphs have been plotted to study the efficiency of rotation, magnetic field, internal heat source and other nanofluid parameters to the system
Control strategy on the double-diffusive convection in a nanofluid layer with internal heat generation
The influences of feedback control and internal heat source on the onset of Rayleigh–Bénard convection in a horizontal nanofluid layer is studied analytically due to Soret and Dufour parameters. The confining boundaries of the nanofluid layer (bottom boundary–top boundary) are assumed to be free–free, rigid–free, and rigid–rigid, with a source of heat from below. Linear stability theory is applied, and the eigenvalue solution is obtained numerically using the Galerkin technique. Focusing on the stationary convection, it is shown that there is a positive thermal resistance in the presence of feedback control on the onset of double-diffusive convection, while there is a positive thermal efficiency in the existence of internal heat generation. The possibilities of suppress or augment of the Rayleigh–Bénard convection in a nanofluid layer are also discussed in detail
Stability control in a binary fluid mixture subjected to cross diffusive coefficients
The effect of feedback control on the onset of double-diffusive convection in a horizontal binary fluid layer is studied analytically subjected to cross diffusion coefficients which are the Soret and Dufour parameters. The confined boundaries of the binary fluid layer are considered to be free-free, rigid-free and rigid-rigid which described the lower and upper surfaces respectively. The linear stability theory is applied and the eigenvalue solution is obtained numerically using Galerkin technique. Focusing on the stationary convection, it is shown that there is a positive thermal resistance in the presence of feedback control on the onset of double-diffusive convection in binary fluid mixture
Rayleigh-Bénard convection in rotating nanofluids layer of porous and nonporous with feedback control
Rayleigh–Bénard convection is the heat transfer process due to buoyancy effect involved that occurred in a horizontal plane of nanofluids layer heated from below. The model for nanofluids includes the mechanisms of Brownian motion and thermophoresis. The onset of Rayleigh–Bénard convection in a horizontal rotating nanofluids layer and in a horizontal nanofluids layer saturated in a rotating porous medium with feedback control, internal heat source, magnetic field, double–diffusive coefficients, porosity, anisotropic, viscosity variation and thermal conductivity variation parameters are investigated theoretically. The confining lower and upper boundary conditions of the nanofluids layer are assumed to be free–free, rigid–free and rigid–rigid. A linear stability analysis of Rayleigh–Bénard convection is used, then the eigenvalue is obtained numerically using the Galerkin method and solved using Maple software. The impact of the feedback control, rotation, internal heat source, magnetic field, double–diffusive coefficients, porosity, anisotropic, viscosity variation and thermal conductivity variation parameters on the onset of convection in nanofluids system are analyzed and presented graphically. It is found that the impact of increasing the effects of feedback control, rotation, magnetic field, Dufour, porosity, anisotropic and thermal conductivity variation parameters help to delay the onset of convection in the system, meanwhile elevating the effects of internal heat source, Soret and viscosity variation parameters hasten the instability of the system. Further, the lower and upper boundary conditions in the present investigation are obviously found to be more stable in rigid–rigid boundaries compared to free–free and rigid–free boundaries