33 research outputs found

    Numerical analysis and simulation of an assured crew return vehicle flow field

    Get PDF
    A lifting body was proposed as a candidate for the Assured Crew Return Vehicle (ACRV) which will serve as a crew rescue vehicle for the Space Station Freedom. The focus is on body surface definition, both surface and volume grid definition, and the computation of inviscid flow fields about the vehicle at wind tunnel conditions. Very good agreement is shown between the computed aerodynamic characteristics of the vehicle at M(sub infinity) = 10 and those measured in wind tunnel tests at high Reynolds numbers

    Downstream Effects on Orbiter Leeside Flow Separation for Hypersonic Flows

    Get PDF
    Discrepancies between experiment and computation for shuttle leeside flow separation, which came to light in the Columbia accident investigation, are resolved. Tests were run in the Langley Research Center 20-Inch Hypersonic CF4 Tunnel with a baseline orbiter model and two extended trailing edge models. The extended trailing edges altered the wing leeside separation lines, moving the lines toward the fuselage, proving that wing trailing edge modeling does affect the orbiter leeside flow. Computations were then made with a wake grid. These calculations more closely matched baseline experiments. Thus, the present findings demonstrate that it is imperative to include the wake flow domain in CFD calculations in order to accurately predict leeside flow separation for hypersonic vehicles at high angles of attack

    Experimental and Computational Analysis of Shuttle Orbiter Hypersonic Trim Anomaly

    Get PDF
    During the high-Mach-number, high-altitude portion of the first entry of the Shuttle Orbiter, the vehicle exhibited a nose-up pitching moment relative to preflight prediction of approximately Delta Cm = 0.03. This trim anomaly has been postulated to be due to compressibility, viscous, and/or real-gas (lowered specific heat ratio gamma) effects on basic body pitching moment, body-flap effectiveness, or both. In order to assess the relative contribution of each of these effects, an experimental study was undertaken to examine the effects of Mach number, Reynolds number, and ratio of specific heats. Complementary computational solutions were obtained for wind-tunnel and flight conditions. The primary cause of the anomaly was determined to be lower pressures on the aft windward surface of the Orbiter than deduced from hypersonic wind-tunnel tests with ideal- or near-ideal-gas test flow. The lower pressure levels are a result of the lowering of the flowfield gamma due to high-temperature effects. This phenomenon was accurately simulated in a hypersonic wind tunnel using a heavy gas, which provided a lower, gamma, and was correctly predicted by Navier-Stokes computations using nonequilibrium chemistry

    Computational/Experimental Aeroheating Predictions for X-33

    Get PDF
    Laminar and turbulent heating-rate calculations from an "engineering" code and laminar calculations from a "benchmark" Navier-Stokes code are compared with experimental wind-tunnel data obtained on several candidate configurations for the X-33 Phase 2 flight vehicle. The experimental data were obtained at a Mach number of 6 and a freestream Reynolds number ranging from 1 to 8 x 10(exp 6)/ft. Comparisons are presented along the windward symmetry plane and in a circumferential direction around the body at several axial stations at angles of attack from 20 to 40 deg. The experimental results include both laminar and turbulent flow. For the highest angle of attack some of the measured heating data exhibited a "non-laminar" behavior which caused the heating to increase above the laminar level long before "classical" transition to turbulent flow was observed. This trend was not observed at the lower angles of attack. When the flow was laminar, both codes predicted the heating along the windward symmetry plane reasonably well but under-predicted the heating in the chine region. When the flow was turbulent the LATCH code accurately predicted the measured heating rates. Both codes were used to calculate heating rates over the X-33 vehicle at the peak heating point on the design trajectory and they were found to be in very good agreement over most of the vehicle windward surface

    Aerothermodynamics at NASA-Langley Research Center

    No full text
    The Aerothermodynamics Branch at NASA - Langley Research Center is tasked with developing, assessing and applying aerothermodynamic technologies to enable the development of hypersonic aircraft, launch vehicles, and planetary/earth entry systems. To accomplish this mission, the Branch capitalizes on the synergism between the experimental and computational facilities/tools which reside in the branch and a staff that can draw on five decades of experience in aerothermodynamics. The Aerothermodynamics Branch is staffed by 30 scientists/engineers. The staff, of which two-thirds are less than 40 years old, is split evenly between experimentalists and computationalists. Approximately 90 percent of the staff work on space transportation systems while the remainder work on planetary missions. The Branch manages 5 hypersonic wind tunnels which are staffed by 14 technicians, numerous high end work stations and a SGI Origin 2000 system. The Branch also utilizes other test facilities located at Langley as well as other national and international test sites. Large scale computational requirements are met by access to Agency resources

    A High Angle of Attack Inviscid Shuttle Orbiter Computation

    Get PDF
    As a preliminary step toward predicting the leeside thermal environment for winged reentry vehicles at flight conditions, a computational solution for the flow about the Shuttle Orbiter at wind tunnel conditions was made using a point-implicit, finite volume scheme known as the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA). The Scheme is a second-order accurate, upwind-biased Navier-Stokes solver capable of solving non-equilibrium chemistry flows with radiative equilibrium wall temperatures and finite-rate wall catalysis. For this study, however, the code is run in its simplest form, i.e., inviscid flow using perfect gas chemistry. The surface pressures resulting from the computational solution are compared with wind tunnel data. The results indicate that the dominant inviscid flow features are being accurately predicted on the leeside of the Shuttle Orbiter at a moderately high angle of attack. Research Engineer, Aerothermodynamics Branch, Space Systems Division. y..

    Characteristics of the Shuttle Orbiter Leeside Flow During A Reentry Condition

    No full text
    A study of the leeside flow characteristics of the Shuttle Orbiter is presented for a reentry flight condition. The flow is computed using a point-implicit, finite-volume scheme known as the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA). LAURA is a second-order accurate, laminar Navier-Stokes solver, incorporating finite-rate chemistry with a radiative equilibrium wall temperature distribution and finite-rate wall catalysis. The resulting computational solution is analyzed in terms of salient flow features and the surface quantities are compared with flight data

    Single Block Three--Dimensional Volume Grids About Complex Aerodynamic Vehicles

    Get PDF
    This paper presents an alternate approach for the generation of volumetric grids for supersonic and hypersonic ows about complex con gurations. The method uses parametric two-dimensional block face grid de nition within the frame work of GRID-GEN2D. The incorporation of face decomposition reduces complex surfaces to simple shapes. These simple shapes are recombined to obtain the nal face de nition. The advantages of this method include the reduction of overall grid generation time through the use of vectorized computer code, the elimination of the need to generate matching block faces, and the implementation of simpli ed boundary conditions. A simple axisymmetric grid is used to illustrate this method. In addition, volume grids for two complex con gurations, the Langley Lifting Body (HL-20) and the Space Shuttle Orbite

    A High Angle of Attack Inviscid Shuttle Orbiter Computation," NASA TM--107606

    No full text
    As a preliminary step toward predicting the leeside thermal environment for winged reentry vehicles at ight conditions, a computational solution for the ow about the Shuttle Orbiter at wind tunnel conditions was made using a point-implicit, nite volume scheme known as the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA). The Scheme is a second-order accurate, upwind-biased Navier-Stokes solver capable of solving non-equilibrium chemistry ows with radiative equilibrium wall temperatures and nite-rate wall catalysis. For this study, however, the code is run in its simplest form, i.e., inviscid ow using perfect gas chemistry. The surface pressures resulting from the computational solution are compared with wind tunnel data. The results indicate that the dominant inviscid ow features are being accurately predicted on the leeside of the Shuttle Orbiter at a moderately high angle of attack
    corecore