132,700 research outputs found
Reciprocating magnetic refrigerator employing tandem porous matrices within a reciprocating displacer
Disclosed is a method and apparatus for a magnetic refrigeration system. A continuously reciprocating displacer houses at least a pair of paramagnetic substances each of which is alternately driven into and out of a magnetic field. Two separate bidirectional pumping systems flow helium gas through the displacer and through both paramagnetic substances to create heat exchange conditions at two separate temperature extremes
A cold ejector for closed-cycle helium refrigerators
The test results are presented of an initial cold helium ejector design that can be installed on a closed cycle refrigerator to provide refrigeration at temperatures below 4.2 K. The ejector, test apparatus, instrumentation, and test results are described. Tests were conducted both at room temperature and at cryogenic temperatures to provide operational experience with the ejector as well as for future use in the subsequent design of an ejector that will provide refrigeration at temperatures below 3 K
Atmospheric environment for ASTP (SA-210) launch
A summary is presented of selected atmospheric conditions observed near ASTP/SA-210 launch time on July 15, 1975, at Kennedy Space Center, Florida. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), density, index of refraction, and wind/wind shear aloft are included. A final meteorological data tape for the ASTP launch, consisting of wind and thermodynamic parameters versus altitude, has been constructed
Summary of atmospheric data observations for 155 flight of MSFC/ABMA related aerospace vehicles
A summary of selected atmospheric conditions observed near launch time for 155 NASA-Marshall Space Flight Center and Army Ballistic Missile Agency related vehicles, launched primarilv from Cape Kennedy, Florida, between August 20, 1953, and November 16, 1963, is presented. Values of ambient pressure, temperature, relative humidity, ground winds, visual observations, density aloft, and wind/wind shear aloft are included. The extremes of these parameters are listed for each type of launch vehicle
Anomalous magneto-structural behavior of MnBi explained: a path towards an improved permanent magnet
Low-temperature MnBi (hexagonal NiAs phase) exhibits anomalies in the lattice
constants (a, c) and bulk elastic modulus (B) below 100 K, spin reorientation
and magnetic susceptibility maximum near 90 K, and, importantly for
high-temperature magnetic applications, an increasing coercivity (unique to
MnBi) above 180 K. We calculate the total energy and magneto-anisotropy energy
(MAE) versus (a, c) using DFT+U methods. We reproduce and explain all the above
anomalies. We predict that coercivity and MAE increase due to increasing a,
suggesting means to improve MnBi permanent magnets.Comment: 4 pages, 5 figure
Wrist joint assembly
A wrist joint assembly is provided for use with a mechanical manipulator arm for finely positioning an end-effector carried by the wrist joint on the terminal end of the manipulator arm. The wrist joint assembly is pivotable about a first axis to produce a yaw motion, a second axis is to produce a pitch motion, and a third axis to produce a roll motion. The wrist joint assembly includes a disk segment affixed to the terminal end of the manipulator arm and a first housing member, a second housing member, and a third housing member. The third housing member and the mechanical end-effector are moved in the yaw, pitch, and roll motion. Drive means are provided for rotating each of the housings about their respective axis which includes a cluster of miniature motors having spur gears carried on the output drive shaft which mesh with a center drive gear affixed on the housing to be rotated
Gas lubricant compositions Patent
High temperature gas lubricant consisting of two fluoro-bromo-methane
Filled polymers for bearings and seals used in liquid hydrogen
Filled polytrifluorochloroethylene /PTFCE/ shows better thermal stability, less creep, and higher compressive moduli than filled polytetrafluoroethylene /PTFE/. Bearing and seal materials exhibiting the best characteristics contain a high percentage of PTFCE
Heart Rate Patterns Observed in Medical Monitoring
Medical monitoring of heart rate patterns during conditions of sleep, quiet rest, breath-holding, hypoxia, and increased g forces of aircraft fligh
Modeling the transient flow of undercooled glass-forming liquids
n a recent experimental study on flow behavior of Vitreloy-1 (Zr41.25Ti13.75Cu12.5Ni10Be22.5), three distinct modes of flow are suggested: Newtonian, non-Newtonian, and localized flow. In a subsequent study, the experimental flow data is utilized in a self-consistent manner to develop a rate equation to govern local free volume production. In the present study the production-rate equation is transformed into a transport equation that can be coupled with momentum and energy transport via viscosity to formulate a model capable to govern the flow of undercooled glass forming liquids. The model is implemented to study the flow behavior of undercooled Vitreloy-1 melt. For a temperature of 700 K and shear loading of 1.0 MPa, the model predicts that the flow profile gradually stabilizes to its Newtonian limit while the liquid is maintained in structural and thermal equilibrium. For the conditions of 675 K and 100 MPa, the model predicts that the flow profile departs from its Newtonian limit and gradually stabilizes to a non-Newtonian limit. The non-Newtonian profile is evaluated independently by considering structurally quasistatic conditions, which yield the shear-rate dependency of flow. For the conditions of 650 K and 2.0 GPa, the model predicts that the flow continuously localizes and ultimately accelerates unconstrained, while the system is driven out of structural and thermal equilibration towards an unstable state associated with free volume generation, viscosity degradation, and temperature rise. The computed temperature and shear rate evolutions for the three distinct flow modes are superimposed on a temperature-shear rate diagram and appear to computationally reproduce the experimental flow map. The system's structural state that appears to dictate flow behavior is quantified by a dimensionless number, which results from a time scale analysis of the free volume production equation
- …