118 research outputs found
Improved isolation of cadmium from paddy soil by novel technology based on pore water drainage with graphite-contained electro-kinetic geosynthetics
Novel soil remediation equipment based on electro-kinetic geosynthetics (EKG) was developed for in situ isolation of metals from paddy soil. Two mutually independent field plot experiments A and B (with and without electric current applied) were conducted. After saturation using ferric chloride (FeCl3) and calcium chloride (CaCl2), soil water drainage capacity, soil cadmium (Cd) removal performance, energy consumption as well as soil residual of iron (Fe) and chloride (Cl) were assessed. Cadmium dissolved in the soil matrix and resulted in a 100% increase of diethylenetriamine-pentaacetic acid (DTPA) extracted phyto-available Cd. The total soil Cd content reductions were 15.20% and 26.58% for groups A and B, respectively, and electric field applications resulted in a 74.87% increase of soil total Cd removal. The electric energy consumption was only 2.17 kWh/m3 for group B. Drainage by gravity contributed to > 90% of the overall soil dewatering capacity. Compared to conventional electro-kinetic technology, excellent and fast soil water drainage resulted in negligible hydrogen ion (H+) and hydroxide ion (OH−) accumulation at nearby electrode zones, which addressed the challenge of anode corrosion and cathode precipitation of soil metals. External addition of FeCl3 and CaCl2 caused soil Fe and Cl residuals and led to 4.33–7.59% and 139–172% acceptable augments in soil total Fe and Cl content, correspondingly, if compared to original untreated soils. Therefore, the novel soil remediation equipment developed based on EKG can be regarded as a promising new in situ technology for thoroughly isolating metals from large-scale paddy soil fields
Effect of Extraction Variables on the Biodegradable Chelant-Assisted Removal of Toxic Metals from Artificially Contaminated European Reference Soils
Remoção de fármacos e desreguladores endócrinos em estações de tratamento de esgoto: revisão da literatura
Copper and trace element fractionation in electrokinetically treated methanogenic anaerobic granular sludge
The effect of electrokinetic treatment (0.15 mA cm(-2)) on the metal fractionation in anaerobic granular sludge artificially contaminated with copper (initial copper concentration 1000 mg kg(-1) wet sludge) was studied. Acidification of the sludge (final pH 4.2 in the sludge bed) with the intention to desorb the copper species bound to the organic/sulfides and residual fractions did not result in an increased mobility, despite the fact that a higher quantity of copper was measured in the more mobile (i.e. exchangeable/carbonate) fractions at final pH 4.2 compared to circum-neutral pH conditions. Also addition of the chelating agent EDTA (Cu2+:EDTA4- ratio 1.2:1) did not enhance the mobility of copper from the organic/sulfides and residual fractions, despite the fact that it induced a reduction of the total copper content of the sludge. The presence of sulfide precipitates likely influences the copper mobilisation from these less mobile fractions, and thus makes EDTA addition ineffective to solubilise copper from the granule
Erratum to: Special issue on the 4th International Conference on the "Challenges in Environmental Science & Engineering", CESE-2011: Solutions to environmental challenges through the application of advanced technologies
ESR ST study of hydroxyl radical generation in wet peroxide system catalyzed by heterogeneous ruthenium
Ru-based catalysts gained popularity because of their applicability for a variety of processes, including carbon monoxide oxidation, wet air catalytic oxidation and wastewater treatment. The focus of a current study was generation of hydroxyl radicals in the wet peroxide system catalyzed by heterogeneous ruthenium, spin-trapped by DEPMPO and DIPPMPO by means of electron spin resonance spin-trapping technique (ESR ST). The mechanism of free radicals formation was proposed via direct cleavage of hydrogen peroxide over ruthenium active sites. The chemical reactions occurring in the system were introduced according to the experimental results. Also, radical production rate was assessed based on concentration changes of species involved in the bulk liquid phase oxidatio
Special issue on the Challenges in Environmental Science and Engineering, CESE-2010:26 September - 1 October, 2010 - The Sebel, Cairns, Queensland, Australia
Free radical reaction pathway, thermohemistry of peracetic acid homolysis and its application for phenol degradation: spectroscopic sti=udy and quantum chemistry calculations
The homolysis of peracetic acid (PAA) as a relevant source of free radicals (e.g., •OH) was studied in detail. Radicals formed as a result of chain radical reactions were detected with electron spin resonance and nuclear magnetic resonance spin trapping techniques and subsequently identified by means of the simulation-based fitting approach. The reaction mechanism, where a hydroxyl radical was a primary product of O-O bond rupture of PAA, was established with a complete assessment of relevant reaction thermochemistry. Total energy analysis of the reaction pathway was performed by electronic structure calculations (ab initio and semiempirical methods) at different levels and basis sets [e.g., HF/6-311G(d), B3LYP/6-31G(d)]. Furthermore, the heterogeneous MnO2/PAA system was tested for the elimination of a model aromatic compound, phenol from aqueous solution. An artificial neural network (ANN) was designed to associate the removal efficiency of phenol with relevant process parameters such as concentrations of both the catalyst and PAA and the reaction time. Results were used to train and test ANN to identify an optimized network structure, which represented the correlations between the operational parameters and removal efficiency of pheno
- …