Using Unity3D as an Elevator Simulation Tool

Simulations are used for finding answers to what-if scenarios prior to making decisions. Discrete event simulation (DES) tools are usually used for industrial processes. However, these tools require the creators of the simulation model to have highly specialized knowledge and they only rarely provide easily understandable graphic representations of the modelled situation. An elevator simulation model was created using an unusual approach: the simulation model was developed in Unity3D, an IDE intended for making computer games. The model was evaluated in terms of the accuracy of the results and of the suitability of using such a tool for creating an elevator simulation with a sequence dispatcher. The paper includes validation results and discusses the advantages, disadvantages and limits of such an approach. Although a DES tool would be better for the elevator itself, separate details of the simulation can be much more easily modelled in Unity3D. It can take into account 3D space (as opposed to 1D, which is usual for DESs), for example for finding probable paths of persons, calculating volumes or finding the right door opening times

PECVD anti-reflective coating deposition screen printing: front side Ag grid; back side fully covering Al high temperature anneal: emitter and contact formation partially removal of the Al paste printing of the AgAl contact pads on the rear low temperatur

ABSTRACT: Screen printed Si solar cells are commonly interconnected in modules with straps soldered to their busbars on the front and the AgAl pads on their back. We present a new method for applying AgAl pads on fully covered Al backsides. This method is of great interest because it can be used to apply AgAl pads on screen printed Al rear side emitters of n-type p+nn+ Si solar cells. That makes their industrial production feasible. The method developed here can also be implemented to increase the open circuit voltage of an n+pp+ standard industrial cell due to a fully covering Al-BSF on the rear side

Ontology Based Strategies for Supporting Communication within Social Networks

In this paper, ontology based dialogue strategies are presented in connection with the concept of communicative images. Communicative images are graphical objects integrated with a dialogue interface and linked to an associated knowledge database which stores the semantics of the objects depicted. The relevant pieces of information can be linked to the external knowledge distributed in a social network. Exploiting a formal ontology approach facilitates the process of deriving information from relevant texts that can be found in the social network and it simultaneously forms a suitable framework for supporting dialogue communication in natural language. This approach is discussed and illustrated with various examples in this paper

Direct peptide bioconjugation/PEGylation at tyrosine with linear and branched polymeric diazonium salts

Direct polymer conjugation at peptide tyrosine residues is described. In this study Tyr residues of both leucine enkephalin and salmon calcitonin (sCT) were targeted using appropriate diazonium salt-terminated linear monomethoxy poly(ethylene glycol)s (mPEGs) and poly(mPEG) methacrylate prepared by atom transfer radical polymerization. Judicious choice of the reaction conditions-pH, stoichiometry, and chemical structure of diazonium salt-led to a high degree of site-specificity in the conjugation reaction, even in the presence of competitive peptide amino acid targets such as histidine, lysines, and N-terminal amine. In vitro studies showed that conjugation of mPEG 2000 to sCT did not affect the peptide's ability to increase intracellular cAMP induced in T47D human breast cancer cells bearing sCT receptors. Preliminary in vivo investigation showed preserved ability to reduce [Ca 2+] plasma levels by mPEG 2000-sCT conjugate in rat animal models. © 2012 American Chemical Society

A multiscale study of hot extruded CoNiGa ferromagnetic shape memory alloys

Ferromagnetic shape-memory CoNiGa alloys have attracted much scientific interest due to their potential alternative use as high-temperature shape-memory alloys, bearing a high prospect for actuation and damping applications at elevated temperatures. Yet, polycrystalline CoNiGa, due to strong orientation dependence of transformation strains, suffers from intergranular fracture. Here, two multi-grain CoNiGa samples were prepared by a novel hot extrusion process that can promote favourable grain-boundary orientation distribution and improve the material's mechanical behaviour. The samples were investigated by multiple methods and their microstructural, magnetic, and mechanical properties are reported. It is found that a post-extrusion solutionising heat treatment leads to the formation of a two-phase oligocrystalline homogeneous microstructure consisting of an austenitic parent B2 phase and γ-CoNiGa precipitates. Reconstruction of the full 3D grain morphology revealed large, nearly spherical grains with no low-angle grain boundaries throughout the entire sample volume. The presence of γ precipitation affects the transformation behaviour of the samples, by lowering the martensitic transformation temperature, while, in conjunction with the oligocrystalline microstructure, it improves the ductility. Controlling the composition of the B2 matrix, as well as the phase fraction of the γ phase, is thus crucial for the optimal behaviour of the alloys

PREMIUM, a benchmark on the quantification of the uncertainty of the physical models in the system thermal-hydraulic codes: methodologies and data review

The objective of the Post-BEMUSE Reflood Model Input Uncertainty Methods (PREMIUM) benchmark is to progress on the issue of the quantification of the uncertainty of the physical models in system thermalhydraulic codes by considering a concrete case: the physical models involved in the prediction of core reflooding. The present document was initially conceived as a final report for the Phase I “Introduction and Methodology Review” of the PREMIUM benchmark. The objective of Phase I is to refine the definition of the benchmark and publish the available methodologies of model input uncertainty quantification relevant to the objectives of the benchmark. In this initial version the document was approved by WGAMA and has shown its usefulness during the subsequent phases of the project. Once Phase IV was completed, and following the suggestion of WGAMA members, the document was updated adding a few new sections, particularly the description of four new methodologies that were developed during this activity. Such developments were performed by some participants while contributing to PREMIUM progress (which is why this report arrives after those of other phases). After this revision the document title was changed to “PREMIUM methodologies and data review”. The introduction includes first a chapter devoted to contextualization of the benchmark in nuclear safety research and licensing, followed by a description of the PREMIUM objectives. Next, a description of the Phases in which the benchmark is divided and its organization is explained. Chapter two consists of a review of the involvement of the different participants, making a brief explanation of the input uncertainty quantification methodologies used in the activity. The document ends with some conclusions on the development of Phase I, some more general remarks and some statements on the benefits of the benchmark, which can be briefly summarized as it follows: - Contribution to development of tools and experience related to uncertainty calculation and promotion of the use of BEPU approaches for licensing and safety assessment purposes; - Contribution to prioritization of improvements to thermal-hydraulic system codes; - Contribution to a fluent and close interaction between the scientific community and regulatory organizations. Appendices include the complete description of the experimental data FEBA/SEFLEX used in the benchmark and the methodologies CIRCÉ and FFTBM and the general requirements and description specification used for Phase I. Due to the revision of the document, four extra appendixes have been added related to the methods developed during the activity, MCDA DIPE, Tractebel IUQ and PSI methods

Minimalism in Radiation Synthesis of Biomedical Functional Nanogels

A scalable, single-step, synthetic approach for the manufacture of biocompatible, functionalized micro- and nanogels is presented. In particular, poly(N-vinyl pyrrolidone)-grafted-(aminopropyl)methacrylamide microgels and nanogels were generated through e-beam irradiation of PVP aqueous solutions in the presence of a primary amino-group-carrying monomer. Particles with different hydrodynamic diameters and surface charge densities were obtained at the variance of the irradiation conditions. Chemical structure was investigated by different spectroscopic techniques. Fluorescent variants were generated through fluorescein isothiocyanate attachment to the primary amino groups grafted to PVP, to both quantify the available functional groups for bioconjugation and follow nanogels localization in cell cultures. Finally, a model protein, bovine serum albumin, was conjugated to the nanogels to demonstrate the attachment of biologically relevant molecules for targeting purposes in drug delivery. The described approach provides a novel strategy to fabricate biohybrid nanogels with a very promising potential in nanomedicine

Natural and Synthetic Polymers as Inhibitors of Drug Efflux Pumps

Inhibition of efflux pumps is an emerging approach in cancer therapy and drug delivery. Since it has been discovered that polymeric pharmaceutical excipients such as Tweens® or Pluronics® can inhibit efflux pumps, various other polymers have been investigated regarding their potential efflux pump inhibitory activity. Among them are polysaccharides, polyethylene glycols and derivatives, amphiphilic block copolymers, dendrimers and thiolated polymers. In the current review article, natural and synthetic polymers that are capable of inhibiting efflux pumps as well as their application in cancer therapy and drug delivery are discussed