20 research outputs found

    Improvement of Cellulase Production and its Characteristics by Inducing Mutation on Trichoderma reesei 2414 under Solid State Fermentation on Rice By-products

    Get PDF
     Background and Objective: Solid State Fermentation is an economic technology to produce value-added products. Also, the use of agricultural by-products, as a waste management strategy, has recently been considered. On the other hand, the new mutants are interesting for the production of enzymes. The aim of this study was to investigate the effect of mutation on the improvement of cellulase quality. Therefore, rice by-products were used under solid state fermentation for production of cellulase. Moreover, the characteristics of the new cellulose produced from the new mutated strain was studied.Material and Methods: Cellulase was produced under solid state fermentation process. Spore suspensions of Trichoderma reesei were subjected to Co60 γ irradiation and mutated. The activities of cellulases (from parent and mutants) were compared. The effects of temperature and pH on cellulase activity and the stability of cellulase in optimum condition were investigated.Results and Conclusion: Cellulase was successfully produced under solid state fermentation on the mixture of rice by-products as substrate. The results showed that mutation had a significant effect on cellulase activity and Characteristics. Trichoderma reesei B (a mutated strain) had about 30% filter Paperase and 23% Carboxymethyl Cellulase higher than its parent. Cellulase activity of Trichoderma reesei B was 47% higher than its parent at the optimum temperature (50°C). In other temperatures, the activity of cellulase extracted from Trichoderma reesei B was significantly higher than that of the others; for example, at 60°C, the enzyme activity was 120% higher than its parent. It is notable that an 84% increase in the enzyme activity was observed at the optimum pH (4.5) after mutation and cellulase activity increased from 0.72 U g-1 dry solid to 1.31 U g-1 dry solid.Conflict of interest: The authors declare no conflict of interest

    Optimization of Phospholipase A1 Immobilization on Plasma Surface Modified Chitosan Nanofibrous Mat

    Get PDF
    Phospholipase A1 is known as an effective catalyst for hydrolysis of various phospholipids in enzymatic vegetable oil degumming. Immobilization is one of the most efficient strategies to improve its activity, recovery and functional properties. In this study, chitosan-co-polyethylene oxide (90:10) nanofibrous mat was successfully fabricated and modified with atmospheric plasma at different times (2, 6 and 10 min) to interact with enzyme molecules. Scanning electron microscopy images revealed that the membranes retained uniform nanofibrous and open porous structures before and after the treatment. PLA1 was successfully immobilized onto the membrane surfaces via covalent bonds with the functional groups of chitosan nanofibrous mat. Response surface methodology was used to optimize the immobilization conditions for reaching the maximum immobilization efficiency. Enzyme concentration, pH, and immobilization time were found to be significant key factors. Under optimum conditions (5.03 h, pH 5.63, and enzyme dosage 654.36 UI), the atmospheric plasma surface modified chitosan nanofibers reached the highest immobilization efficiency (78.50%). Fourier transform infrared spectroscopy of the control and plasma surface-modified chitosan nanofibers revealed the functional groups of nanofibers and their reaction with the enzyme. The results indicated that surface modification by atmospheric plasma induced an increase in PLA1 loading on the membrane surfaces

    Statistical Optimization of Tannase Production by Penicillium sp. EZ-ZH390 in Submerged Fermentation

    Get PDF
    Tannase has several important applications in food, feed, chemical and pharmaceutical industries. In the present study, production of tannase by mutant strain, Penicillium sp. EZ-ZH390, was optimized in submerged fermentation utilizing two statistical approaches. At first step, a one factor at a time design was employed to screen the preferable nutriments (carbon and nitrogen sources of the medium) to produce tannase. Screening of the carbon source resulted in the production of 10.74 UmL-1 of tannase in 72 h in the presence of 14% raspberry leaves powder. A 1.99-fold increase in tannase production was achieved upon further screening of the nitrogen source (in the presence of 1.2% ammonium nitrate). Then the culture condition variables were studied by the response surface methodology using a central composite design. The results showed that temperature of 30°C rotation rate of 85 rpm and fermentation time 24 h led to increased tannase production. At these conditions, tannase activity reached to 21.77 UmL-1, and tannase productivity was at least 3.55 times (0.26 UmL-1h-1) in compare to those reported in the literature. The present study showed that, at the optimum conditions, Penicillium sp. EZ-ZH390 is an excellent strain for use in the efficient production of tannase

    Optimization of cellulase production under solid‐state fermentation by a new mutant strain of Trichoderma reesei

    No full text
    Nowadays, the use of agricultural by‐products, as the cheap substrate for the production of value‐added products, is of high interest for the researchers and practitioners. Cellulase is a relatively expensive and a very important industrial enzyme where in this study was produced form rice by‐products under solid‐state fermentation. A new mutant of Trichoderma reesei was used for cellulase production. The effective variables were initially screened by “Plackett and Burman design.” Afterward, the main variables including moisture content, P source, incubation temperature, and incubation time were optimized by “one factor at a time design.” Finally, the resulting variables including 74% for moisture content, 2 g/L for K2HPO4, 30°C of incubation temperature, and 4 days of incubation time were reported as the ultimate optimal condition for cellulase production

    Effect of Modified Atmosphere Packaging on Aril Physico-chemical and Microbial Properties of Two Pomegranate Cultivars (Punica granatum L.) Grown in Iran

    No full text
    Background and Objectives: Edible parts of pomegranate fruits are a rich source of bioactive compounds. The present research examines the effect of modified atmosphere packaging on the fruit physico-chemical and microbial properties of two commercial pomegranate cultivars grown in Iran. Materials and Methods: The arils were packaged and stored under four different atmospheres. All of the packaged samples were stored at 4 °C for 15 days. Results: The results revealed an increase in total acidity of all treatments. The highest total soluble solid (TSS) was observed in ‘Yousef-Khani’­ stored in 10% O2 + 15% CO2, while ‘Malas-e-Saveh’ treated with 20% O2 + 5% CO2 showed the highest degree of TSS. The mean value of a* in ‘Malas-e-Saveh’ arils packed with normal and (15% O2 + 10% CO2 + 75% N2) atmosphere increased significantly. The L* showed a decrease in ‘Yousef-Khani’­. Total phenolic compounds gradually increased during storage. After storage, decreases in total anthocyanin contents ranged from 12 to 30% for ‘Yousef-Khani’­. The overall antioxidant activity of arils in ‘Yousef-Khani’ showed a 6-15% increase during storage. However, a reverse effect was observed for ‘Malas-e-Saveh’. The lowest microbial counts were recorded under the atmosphere containing 10 and 15% CO2. Conclusions: Packaging of ‘Malas-e-Saveh’ arils in 15% O2 + 10% CO2 and ‘Yousef-Khani’ in 15% O2 + 10% CO2 or 10% O2 + 15% CO2 is recommended to extend the shelf-life of ready-to-eat arils. Keywords: Pomegranate, Modified atmosphere, Phenolic compounds, Anthocyanin, Antioxidant activit

    Isolation and identification of lactic acid bacteria with phytase activity from sourdough

    No full text
    Wholemeal bread is strongly recommended due to its nutritional value. However, whole‐grain foods contain a high level of phytic acid, an antinutritional factor that decreases the mineral bioavailability. The objective of this study was isolation and identification of lactic acid bacteria with phytase activity to find a suitable starter for bread‐making. Wheat–legume sourdoughs were prepared by the back‐slopping procedure. Lactic acid bacteria were isolated from the sourdough of wheat flour–mung bean, and their phytase activity was tested in the solid and liquid media. Out of the nine phytase‐active isolates in the solid medium, only three isolates produced extracellular phytase in the liquid medium with activity ranging from 16.3 to 53.2 (U/ml). These isolates belonged to species Weissella confusa mk.zh95 and Pediococcus pentosaceus. The highest phytase activity was found for Weissella confusa mk.zh95. Weissella confusa mk.zh95 is considered an interesting source of phytase during cereals and legumes fermentation which improves the bioavailability of minerals

    Statistical Optimization of Tannase Production by Penicillium sp. EZ-ZH390 in Submerged Fermentation

    No full text
    Tannase has several important applications in food, feed, chemical and pharmaceutical industries. In the present study, production of tannase by mutant strain, Penicillium sp. EZ-ZH390, was optimized in submerged fermentation utilizing two statistical approaches. At first step, a one factor at a time design was employed to screen the preferable nutriments (carbon and nitrogen sources of the medium) to produce tannase. Screening of the carbon source resulted in the production of 10.74 U/mL of tannase in 72 h in the presence of 14% raspberry leaves powder. A 1.99-fold increase in tannase production was achieved upon further screening of the nitrogen source (in the presence of 1.2% ammonium nitrate). Then the culture condition variables were studied by the response surface methodology using a central composite design. The results showed that temperature of 30°C rotation rate of 85 rpm and fermentation time 24h led to increased tannase production. At these conditions, tannase activity reached to 21.77 U/mL, and tannase productivity was at least 3.55 times (0.26 U/mL.h) in compare to those reported in the literature. The present study showed that, at the optimum conditions, Penicillium sp. EZ-ZH390 is an excellent strain for use in the efficient production of tannase.</p
    corecore