31 research outputs found
Recommended from our members
Anode Study for Achieving Higher Energy Density in All-Solid-State Batteries
All-solid-state batteries (ASSBs) have gained lots of attention by both science and industry field. There are numerous benefits of adopting ASSB. First, because of inorganic solid-state electrolytes (SSEs), ASSBs have less safety concerns compared to the conventional liquid lithium-ion batteries (LIBs). Another reason is that, the energy density of ASSBs could exceeds that of LIBs with the premise of utilizing alloy-type or Li metal anode. Despite the extensive studies for decades, the alloy-type, especially Si anode, and Li metal failed to achieve reasonable cyclability up to the practical level. However, the recent studies shed light on excellent compatibility of argyrodite solid electrolyte, Li6PS5Cl, and anode-free (Li metal) anode and pure Si anode. First half of this dissertation is on the study of critical current density (CCD) of Li metal-ASSBs. The low CCD of Li metal-ASSBs hindered the practical operation of the cell, whereas inconsistent CCDs reported in academia. The variation of CCDs could be attributed to the various factors, such as temperature, solid electrolyte chemistry or pressure. The relationship between the fabrication pressure contact hold time of Li metal vs CCD is reported, elucidating the effect of controlled Li deformation on CCD. Further, the volumetric expansion of full cell configuration of Li metal-ASSB was mitigated to achieve higher CCDs at room temperature.
Alloy-type Si anode was investigated in this thesis as well. Si-ASSBs have shown promising performance without continual solid-electrolyte interface (SEI) growth. However, the first cycle irreversible capacity loss yields low initial Coulombic efficiency (ICE) of Si, limiting the energy density. To address this, we adopt a prelithiaiton strategy to increase ICE and conductivity of Si-ASSBs. A significant ICE was observed for Li1Si anode paired with lithium cobalt oxide (LCO) cathode. A high areal capacity of up to 10 mAh cm-2 was attained using this Li1Si anode, suggesting that the prelithiation method may be suitable for high-loading next-generation all-solid-state batteries. The N/P ratio of Si in ASSBs showed peculiar behavior compared to liquid LIBs, which further broaden a usage of Si not only as anode but potentially as part of current collector.
Overall, this dissertation offers an understanding of high-capacity anode for ASSBs which could lead to safe and high energy density cells, one step closer to commercialization
The Analysis of Antecedents for the Video Telephony Service Adoption: From the Value-Based Perspective
Korean Telecommunications Industry has a large scale market and boasts on high service quality and high technologies enough to provide the Video Telephony Service (VTS) satisfactorily. For many years, Korean telephone companies have been investing enormous sums to advertise their services widely and to allow their customers to change their cell phones for the third-generation (3G) devices indispensable for the service. However, despite their efforts, the VTS adoption rate in Korea is very low and it seems that customers seldom feel the necessity to use. From this viewpoint, it becomes necessary to find the antecedents influencing the intention to use for the VTS empirically. For this purpose, we proposed several hypotheses from the perspective of the Value-based Adoption Model (VAM). VAM is a conceptual model suggested to overcome some limitations of the Technology Acceptance Model (TAM) in explaining the adoption of new Information and Communication Technology (ICT) such as Mobile Internet where customers play the role of service consumer rather than simply technology users. We conducted a survey on 125 samples and found that customers perceive the value of VTS when they can recognize the service is functionally useful (Perceived Usefulness) and when they feel they can put themselves forward by using it (Self-Expression). On the other hand, the other factors including Technical Complexity, Privacy Concern and Perceived Price (Fee) donât have statistically significant influences on the Perceived Value of VTS
Recommended from our members
Elucidating the Role of Prelithiation in Si-based Anodes for Interface Stabilization
Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that forms during the prelithiation of SiOx is presented here and the results are compared with prelithiaton of Si anodes. Local structure probe combined with detailed electrochemical analysis reveals that a characteristic mosaic interface is formed on both prelithiated SiOx and Si anodes. This mosaic interface containing multiple lithium silicates phases, is fundamentally different from the solid electrolyte interface (SEI) formed without prelithiation. The ideal conductivity and mechanical properties of lithium silicates enable improved cycling stability of both prelithiated anodes. With a higher ratio of lithium silicates due to the oxygen participation, prelithiated SiO1.3 anode improves the initial coulombic efficiency to 94% in full cell and delivers good cycling retention (77%) after 200 cycles. The insights provided in this work can be used to further optimize high Si loading (>70% by weight) based anodes in future high energy density batteries
Recommended from our members
Design principles for enabling an anode-free sodium all-solid-state battery
Anode-free batteries possess the optimal cell architecture due to their reduced weight, volume and cost. However, their implementation has been limited by unstable anode morphological changes and anodeâliquid electrolyte interface reactions. Here we show that an electrochemically stable solid electrolyte and the application of stack pressure can solve these issues by enabling the deposition of dense sodium metal. Furthermore, an aluminium current collector is found to achieve intimate solidâsolid contact with the solid electrolyte, which allows highly reversible sodium plating and stripping at both high areal capacities and current densities, previously unobtainable with conventional aluminium foil. A sodium anode-free all-solid-state battery full cell is demonstrated with stable cycling for several hundred cycles. This cell architecture serves as a future direction for other battery chemistries to enable low-cost, high-energy-density and fast-charging batteries
Effect of Nb and Mo Addition on the Microstructure and Wear Behavior of Fe-Cr-B Based Metamorphic Alloy Coating Layer Manufactured by Plasma Spray Process
Fe-Cr-B-based metamorphic alloy coating layers were manufactured by plasma spray with a Fe-Cr-B-Mo-Nb composition (hereinafter, M+) powder. The microstructure and wear properties of the coating layers were investigated and compared with a metamorphic alloy coating layer fabricated with commercial m material. XRD analysis revealed that the M and M+ coating layers were composed of α-Fe, (Cr, Fe)2B, and some metallic glass phases. Wear test results showed that M+ coating layers had a superior wear resistance which had 1.48 times lower wear volume than M coating layers. Observations of the worn-out surfaces and cross-sections of the coating layers showed that M+ coating layer had relatively low oxides along the particle boundaries and it suppress a delamination behavior by the oxides
Outcomes after transabdominal cerclage in twin pregnancy with previous unsuccessful transvaginal cerclage.
Transabdominal cerclage (TAC) is reported to be effective for preventing preterm birth in women with unsuccessful transvaginal cerclage (TVC) history. However, TAC has rarely been performed in twin pregnancy given the lack of sufficient evidence and the technical difficulty of the operation. Thus, it is unclear whether TAC is an effective procedure for twin pregnancy in women with a history of unsuccessful TVC. The aim of this study is to compare the characteristics and pregnancy outcomes after TAC in twin pregnancy versus singleton pregnancy, to examine whether twin pregnancy is a risk factor for very preterm birth (before 32 weeks) after TAC, and to determine whether TAC is effective in preventing preterm birth in twin pregnancy. This single-center retrospective cohort study included women who underwent TAC because of unsuccessful TVC history between January 2007 and June 2018. Of 165 women who underwent TAC, 19 had twins and 146 had singletons. Our results showed that the neonatal survival rate improved dramatically when TAC was performed (15.4% (prior pregnancy) vs 94.0% (after TAC) in twins, p<0.01; 22.8% (prior pregnancy) vs 91.1% (after TAC) in singletons, p<0.01). Moreover, the risk of very preterm birth was significantly decreased after TAC in both groups (36/39 (92.3%) (prior pregnancy) vs 2/19 (10.5%) (after TAC) in twins, p<0.01; 290/337 (86.1%) (prior pregnancy) vs 17/146 (11.6%) (after TAC) in singletons, p<0.01). More advanced maternal age and history of prior preterm delivery between 26+0 and 36+6 weeks were independently associated with very preterm birth, whereas the presence of a twin pregnancy was not associated with very preterm birth on multivariate logistic regression analysis. These results suggest that TAC is associated with successful prevention of very preterm birth and improved neonatal survival rates in the absence of procedure-related major complications in women with twin pregnancy and previous unsuccessful TVC history
Recommended from our members
Advanced Characterization Techniques for Overcoming Challenges of Perovskite Solar Cell Materials
High-performing All-solid-state Sodium-ion Batteries Enabled by the Presodiation of Hard Carbon
All-solid-state sodium ion batteries (AS3iBs) are highly sought after for stationary energy storage systems due to their suitable safety and stability over a wide temperature range. Hard carbon (HC), which is low cost, exhibits a low redox potential, and a high capacity, is integral to achieve a practical large-scale sodium-ion battery. However, the energy density of the battery utilizing this anode material is hampered by its low initial Coulombic efficiency (ICE). Herein, two strategies, namely (i) thermal treatment and (ii) presodiation by thermal decomposition of NaBH4, are explored to improve the ICE of pristine HC. Raman spectroscopy, X-ray photoelectron spectroscopy and electrochemical characterizations elucidate that the thermal treatment increases the Csp2 content in the HC structure, while the presodiation supplies the sodium to occupy the intrinsic irreversible sites. Consequently, presodiated HC exhibits an outstanding ICE (>99%) compared to the thermally treated (90%) or pristine HC (83%) in half-cell configurations. More importantly, AS3iB using presodiated HC and NaCrO2 as the anode and cathode, respectively, exhibits a high ICE of 92% and an initial discharge energy density of 294 Wh kg_cathode^(-1
Recommended from our members
Synthetic control of structure and conduction properties in NaâYâZrâCl solid electrolytes
In the development of low cost, sustainable, and energy-dense batteries, chloride-based compounds are promising catholyte materials for solid-state batteries owing to their high Na-ion conductivities and oxidative stabilities. The ability to further improve Na-ion conduction, however, requires an understanding of the impact of long-range and local structural features on transport in these systems. In this study, we leverage different synthesis methods to control polymorphism and cation disorder in Na-Y-Zr-Cl solid electrolytes and interrogate the impact on Na-ion conduction. We demonstrate the existence of a more conductive P21/n polymorph of Na2ZrCl6 formed upon ball milling. In Na3YCl6, the R3Ì polymorph is shown to be more conductive than its P21/n counterpart owing to the presence of intrinsic vacancies and disorder on the Y sublattice. Transition metal ordering in the Na2.25Y0.25Zr0.75Cl6 composition strongly impacts Na-ion transport, where a greater mixing of Y3+ and Zr4+ on the transition metal sublattice facilitates ion migration through partial activation of Cl rotations at relevant temperatures. Overall, Na-ion transport sensitively depends on the phases and transition metal distributions stabilized during synthesis. These results are likely generalizable to other halide compositions and indicate that achieving control over the synthetic protocol and resultant structure is key in the pursuit of improved catholytes for high voltage solid-state sodium-ion batteries