Binder-Free Carbon Nanotube Electrode for Electrochemical Removal of Chromium

Electrochemical treatment of chromium-containing wastewater has the advantage of simultaneously reducing hexavalent chromium (Cr^VI) and reversibly adsorbing the trivalent product (Cr^III), thereby minimizing the generation of waste for disposal and providing an opportunity for resource reuse. The application of electrochemical treatment of chromium is often limited by the available electrochemical surface area (ESA) of conventional electrodes with flat surfaces. Here, we report the preparation and evaluation of carbon nanotube (CNT) electrodes consisting of vertically aligned CNT arrays directly grown on stainless steel mesh (SSM). We show that the 3-D organization of CNT arrays increases ESA up to 13 times compared to SSM. The increase of ESA is correlated with the length of CNTs, consistent with a mechanism of roughness-induced ESA enhancement. The increase of ESA directly benefits Cr^VI reduction by proportionally accelerating reduction without compromising the electrode’s ability to adsorb Cr^III. Our results suggest that the rational design of electrodes with hierarchical structures represents a feasible approach to improve the performance of electrochemical treatment of contaminated water

Chemical Bath Deposition of Aluminum Oxide Buffer on Curved Surfaces for Growing Aligned Carbon Nanotube Arrays

Direct growth of vertically aligned carbon nanotube (CNT) arrays on substrates requires the deposition of an aluminum oxide buffer (AOB) layer to prevent the diffusion and coalescence of catalyst nanoparticles. Although AOB layers can be readily created on flat substrates using a variety of physical and chemical methods, the preparation of AOB layers on substrates with highly curved surfaces remains challenging. Here, we report a new solution-based method for preparing uniform layers of AOB on highly curved surfaces by the chemical bath deposition of basic aluminum sulfate and annealing. We show that the thickness of AOB layer can be increased by extending the immersion time of a substrate in the chemical bath, following the classical Johnson–Mehl–Avrami–Kolmogorov crystallization kinetics. The increase of AOB thickness in turn leads to the increase of CNT length and the reduction of CNT curviness. Using this method, we have successfully synthesized dense aligned CNT arrays of micrometers in length on substrates with highly curved surfaces including glass fibers, stainless steel mesh, and porous ceramic foam

Interconnectivity of Macroporous Hydrogels Prepared via Graphene Oxide-Stabilized Pickering High Internal Phase Emulsions

Interconnected macroporous poly­(acrylic acid) (PAA) hydrogels are prepared via oil-in-water (o/w) Pickering high internal phase emulsion (HIPE) templates stabilized by graphene oxide (GO). The amphiphilicity of GO is adjusted by slight modification with cetyltrimethylammonium bromide (CTAB). The morphology of macroporous PAA is observed by a field-emission scanning electron microscope (FE-SEM). The gas permeability is characterized to evaluate the interconnectivity of polymer foams. The pore and pore throat size can be tailored by varying the wettability and concentration of GO. The selective adsorption toward dyes of PAA hydrogels is proved. Macroporous PAA hydrogels with an open-cell structure show enhanced adsorption behavior of both methylene blue (MB) and copper­(II) ions

Forest plot for mean change in IOP from baseline.

SD indicates standard deviation, CI indicates confidence interval.</p

Forest plot for forest plot for mean change in TISA 750.

SD indicates standard deviation, CI indicates confidence interval.</p

Forest plot for mean change in PAS.

SD indicates standard deviation, CI indicates confidence interval.</p

Forest plot for mean change in number of glaucoma medications.

SD indicates standard deviation, CI indicates confidence interval.</p

Forest plot for mean change in AOD 500.

SD indicates standard deviation, CI indicates confidence interval.</p

Prisma flow diagram.

This meta-analysis aims to systematically compare the efficacy between phacoemulsification (PE) combined with goniosynechialysis (GSL) and PE alone for primary angle-closure disease (PACD) patients. All the data were searched from the PubMed, EMBASE and the Cochrane Library. The Cochrane Handbook was used to evaluate the quality of the included studies. Additionally, this meta-analysis was performed by using the Revman 5.4 software. Nine randomized controlled trials (RCTs) were included in this study. Compared with PE alone group, PE+GSL could result significant reduction in the IOP (MD, 1.81; p = 0.002). In the instrumental subgroup, also more reduction of IOP was shown in the PE+GSL group (MD, 2.11; p = 0.02). In the viscogonioplasty (VGP) subgroup, there was not no statistical difference between PE alone group and PE+GSL group (MD, 1.53; p = 0.11). Also, more reduction of peripheral anterior synechiae (PAS) was shown in the PE+GSL group (MD,59.15; p</div

PRISMA 2020 checklist.

This meta-analysis aims to systematically compare the efficacy between phacoemulsification (PE) combined with goniosynechialysis (GSL) and PE alone for primary angle-closure disease (PACD) patients. All the data were searched from the PubMed, EMBASE and the Cochrane Library. The Cochrane Handbook was used to evaluate the quality of the included studies. Additionally, this meta-analysis was performed by using the Revman 5.4 software. Nine randomized controlled trials (RCTs) were included in this study. Compared with PE alone group, PE+GSL could result significant reduction in the IOP (MD, 1.81; p = 0.002). In the instrumental subgroup, also more reduction of IOP was shown in the PE+GSL group (MD, 2.11; p = 0.02). In the viscogonioplasty (VGP) subgroup, there was not no statistical difference between PE alone group and PE+GSL group (MD, 1.53; p = 0.11). Also, more reduction of peripheral anterior synechiae (PAS) was shown in the PE+GSL group (MD,59.15; p</div