Evaluation of the CNESTEN's TRIGA Mark II research reactor physical parameters with TRIPOLI-4® and MCNP

This paper focuses on the development of a new computational model of the CNESTEN's TRIGA Mark II research reactor using the 3D continuous energy Monte-Carlo code TRIPOLI-4 (T4). This new model was developed to assess neutronic simulations and determine quantities of interest such as kinetic parameters of the reactor, control rods worth, power peaking factors and neutron flux distributions. This model is also a key tool used to accurately design new experiments in the TRIGA reactor, to analyze these experiments and to carry out sensitivity and uncertainty studies. The geometry and materials data, as part of the MCNP reference model, were used to build the T4 model. In this regard, the differences between the two models are mainly due to mathematical approaches of both codes. Indeed, the study presented in this article is divided into two parts: the first part deals with the development and the validation of the T4 model. The results obtained with the T4 model were compared to the existing MCNP reference model and to the experimental results from the Final Safety Analysis Report (FSAR). Different core configurations were investigated via simulations to test the computational model reliability in predicting the physical parameters of the reactor. As a fairly good agreement among the results was deduced, it seems reasonable to assume that the T4 model can accurately reproduce the MCNP calculated values. The second part of this study is devoted to the sensitivity and uncertainty (S/U) studies that were carried out to quantify the nuclear data uncertainty in the multiplication factor keff. For that purpose, the T4 model was used to calculate the sensitivity profiles of the keff to the nuclear data. The integrated-sensitivities were compared to the results obtained from the previous works that were carried out with MCNP and SCALE-6.2 simulation tools and differences of less than 5% were obtained for most of these quantities except for the C-graphite sensitivities. Moreover, the nuclear data uncertainties in the keff were derived using the COMAC-V2.1 covariance matrices library and the calculated sensitivities. The results have shown that the total nuclear data uncertainty in the keff is around 585 pcm using the COMAC-V2.1. This study also demonstrates that the contribution of zirconium isotopes to the nuclear data uncertainty in the keff is not negligible and should be taken into account when performing S/U analysis

Numerical and experimental characterization of the reaction rates in the core of the CNESTEN’s TRIGA Mark II research reactor

Education, training and isotopes production are the most important uses of the Moroccan 2 MW TRIGA Mark II reactor situated at the National Center for Energy Sciences and Nuclear Techniques (CNESTEN, Morocco). To develop new R&D projects in research reactors, the particular and advanced knowledge of neutron and photon flux distribution, within and around the reactor core, is crucial. In order to precisely preparing the experiments in the CNESTEN’s TRIGA reactor, a detailed model was developed using the 3D continuous energy Monte Carlo code TRIPOLI-4 and the continuous energy cross-section data from the JEFF3.1.1 nuclear data library. This new model was used to carry out preliminary neutron and photon calculations to estimate flux levels in the irradiation channels as well as to calculate kinetic parameters of the reactor, core excess reactivity, integral control rods worth and power peaking factors. As a first step of the validation of the model, the obtained results were compared with the experimental ones available in the Final Safety Analysis Report (FSAR) of the TRIGA reactor. A study is being carried out at the end of which the results will be published as an evaluated benchmark. Furthermore, this work aims at experimentally characterize the reaction rates in various irradiation channels inside and outside the reactor core. The measurements are carried out using the neutron activation technique. To set up the experimental design for the activation experiments a series of preliminary calculations were performed using the TRIPOLI-4 model to calculate the expected gamma flux/intensity levels of various materials after irradiations in different positions in the irradiation facilities. Different activation foils with known characteristics are then irradiated and the activity of several isotopes is measured with the Gamma Spectrometry Method. The measured relative reaction rates are then compared with the calculated ones evaluated through the new TRIPOLI-4 reactor model. Fairly good agreement was found, which indicates that the new computational model is accurate enough to reproduce experiments

3-D thermal and radiation-matter interaction simulations of a SiC solid-state detector for neutron flux measurements in JSI TRIGA Mark II research reactor

Neutron detection is a relevant topic in the field of nuclear instrumentation. It is at the heart of the concerns for fusion applications (neutron diagnostics, measurements inside the Test Blanket Modules TBM) as well as for fission applications (in-core and ex-core monitoring, neutron mapping or safety applications in research reactors). Moreover, due to the even more harsh conditions of the future experimental reactors such as the Jules Horowitz Reactor (JHR) or International Thermonuclear Experimental Reactor (ITER), neutron detectors need to be adapted to high neutron and γ fluxes, high nuclear heating rates and high temperatures. Consequently, radiation and temperature hardened sensors with fast response, high energy resolution and stability in a mixed neutron and γ environment are required. All these requirements make wide-bandgap semiconductors and, more precisely, Silicon Carbide (SiC) serious candidates due to their intrinsic characteristics in such extreme environments. Thus, since the last decades, SiC-based detectors are developed and studied for neutron detection in various nuclear facilities. In this paper, a SiC-based neutron detector is 3-D designed and studied through thermal and radiation-matter interaction numerical simulations for a future irradiation campaign at the Jožef Stefan Institute TRIGA Mark II research reactor in Slovenia. Firstly, this paper presents the scientific background and issues of our SiC-based detectors. In a second part the 3-D geometry is shown. Thereafter, the 3-D numerical thermal simulation results are reported. Finally, the 3-D numerical radiation/matter interaction simulations results are presented