13 research outputs found
Hidden attractors and multistability in a modified Chua’s circuit
The first hidden chaotic attractor was discovered in a dimensionless piecewise-linear Chua’s system with a special Chua’s diode. But designing such physical Chua’s circuit is a challenging task due to the distinct slopes of Chua’s diode. In this paper, a modified Chua’s circuit is implemented using a 5-segment piecewise-linear Chua’s diode. In particular, the coexisting phenomena of hidden attractors and three point attractors are noticed in the entire period-doubling bifurcation route. Attraction basins of different coexisting attractors are explored. It is demonstrated that the hidden attractors have very small basins of attraction not being connected with any fixed point. The PSIM circuit simulations and DSP-assisted experiments are presented to illustrate the existence of hidden attractors and coexisting attractors.peerReviewe
Large-Scale Consumption and Zero-Waste Recycling Method of Red Mud in Steel Making Process
To release the environmental pressure from the massive discharge of bauxite residue (red mud), a novel recycling method of red mud in steel making process was investigated through high-temperature experiments and thermodynamic analysis. The results showed that after the reduction roasting of the carbon-bearing red mud pellets at 1100–1200 °C for 12–20 min, the metallic pellets were obtained with the metallization ratio of ≥88%. Then, the separation of slag and iron achieved from the metallic pellets at 1550 °C, after composition adjustment targeting the primary crystal region of the 12CaO·7Al2O3 phase. After iron removal and composition adjustment, the smelting-separation slag had good smelting performance and desulfurization capability, which meets the demand of sulfurization flux in steel making process. The pig iron quality meets the requirements of the high-quality raw material for steel making. In virtue of the huge scale and output of steel industry, the large-scale consumption and zero-waste recycling method of red mud was proposed, which comprised of the carbon-bearing red mud pellets roasting in the rotary hearth furnace and smelting separation in the electric arc furnace after composition adjustment
Advances and Perspectives in methods for identifying high platelet reactivity
Antiplatelet therapy is the foundational treatment for the prevention and treatment of coronary and cerebrovascular ischemic events in patients with coronary heart disease, ischemic stroke, and transient ischemic attack (TIA). However, with more and more studies reporting an increased risk of thrombosis in some patients due to poor response to therapeutic agents, the selection of appropriate P2Y12 inhibitors has become a major challenge that needs to be addressed urgently. Currently, commonly used oral P2Y12 inhibitors include clopidogrel, ticagrelor, and prasugrel. Assessing patients' risk factors before the development of treatment regimens by effectively predicting the risk of high platelet reactivity with specific P2Y12 inhibitors in advance to avert the occurrence of major adverse cardiovascular and cerebrovascular events (MACCE) is the key point to the problem. Up to now, methods available for predicting platelet reactivity include genetic testing, platelet function testing, and risk scores. This review provides a summarization of the existent available identification methods and analyzes the advantages and drawbacks of different methods in specific clinical settings, intending to guide the rational clinical application of P2Y12 receptor inhibitors
Study of new practical ESR dosimeter based on carbonated hydroxyapatite and its dosimetric properties
<div><p>The development of new dosimeters with good dosimetric properties is important for quality control in radiation applications. A new practical electron spin resonance (ESR) dosimeter based on carbonated hydroxyapatite that simulated the composition and structure of tooth enamel was specially synthesized. The synthesized material was investigated by transmission electron microscope, X-ray diffraction, fourier transform infrared spectroscopy and X-ray photo electron spectroscopy to confirm to the main composition of carbonated hydroxyapatite with CO<sub>3</sub><sup>2-</sup> successfully doped into the crystal lattice through optimizing the synthesis process of C/P molar ratio, pH value dynamical adjustment, annealing temperature and time. The dosimetric properties were systematically investigated by ESR spectroscopy. The results indicated that the radiation induced signal had a good dose response within a relatively wide dose range. The dose response was linear in the dose range of 0–400 Gy with a correlation coefficient of 0.9999 and had dose accumulative effect in the experimental dose range of 0–100 Gy. In a wider dose range up to 30 kGy, the dose response also presented linear feature in double-logarithmic coordinate system with a correlation coefficient of 0.9970. The dose detection limit was about 0.34Gy with a given probability of 95% confidence level depending upon a rigid calculation algorithm. The signal was extremely stable in the observation time of 360 days with a variation coefficient of 3.8%. The radiation sensitivity of the material showed no remarkable variation against photon energy from 662 KeV to 1.25 MeV and dose rate from 0.86 Gy/min to 12.17 Gy/min. The material showed more sensitive in lower photon energy range below 662 keV, which hint additional calibration may need when using in special photon energy condition. The preliminary results suggested that this newly developed dosimeter was potential to become a practical dosimeter that would expand the application fields of ESR dosimetry.</p></div
The RIS intensity against time (Days) after irradiation.
<p>The RIS intensity against time (Days) after irradiation.</p
Study of new practical ESR dosimeter based on carbonated hydroxyapatite and its dosimetric properties - Fig 6
<p>The dose rate effect (A) and photon energy dependence (B) of dosimeters.</p
The dose response curve.
<p>(A) The RIS intensity against radiation dose (0–400 Gy). (B) The RIS intensity against radiation dose (1Gy-30 kGy). (C) The RIS intensity against accumulated radiation dose (0–100 Gy).</p
The ESR spectra of dosimeter irradiated at 0 Gy, 0.3 Gy and 10 Gy.
<p>The ESR spectra of dosimeter irradiated at 0 Gy, 0.3 Gy and 10 Gy.</p
The results of material analysis.
<p>(A) TEM micrographs. (B) XRD analysis. (C) FTIR spectra. (D) XPS analysis.</p