78 research outputs found
Apparatus for study of plasmas at elevated temperatures
Microwave discharge plasmas take place within heated zone. Changes in weight of specimens in plasma as well as temperature of sample and plasma can be obtained, facilitating determinations of reaction rates and recombination coefficients
Semipermanent sealing of leaks in high vacuum systems
Silicone-rubber adhesive is applied externally to seal hair-line cracks in sections of high vacuum system while system is partially evacuated. No pretreatment of surface is required since adhesive will be drawn into crack while diffusion or ion pump is off
The effect of heat treatment and test parameters on the aqueous stress corrosion cracking of D6AC steel
The crack growth behavior of D6AC steel as a function of stress intensity, stress and corrosion history and test technique, under sustained load in natural seawater, 3.3 percent NaCl solution, distilled water, and high humidity air was investigated. Reported investigations of D6AC were considered with emphasis on thermal treatment, specimen configuration, fracture toughness, crack-growth rates, initiation period, threshold, and the extension of corrosion fatigue data to sustained load conditions. Stress history effects were found to be most important in that they controlled incubation period, initial crack growth rates, and apparent threshold
Introductory assessment of orbiting reflections for terrestrial power generation
The use of orbiting mirrors for providing energy to ground conversion stations to produce electrical power is shown to be a viable, cost effective and environmentally sound alternative to satellite solar power stations and conventional power sources. This is accomplished with the use of very light weight metal coated polymeric films as mirrors which, after deployment at 800 km, are placed in operational orbit and controlled by solar radiation pressure. Relations are developed showing the influence of a number of parameters (mirror altitude, orbit inclination, period, mirror size and number, and atmospheric effects) on the reflected insolation that may be received by a ground spot as a function of location. Some attractive alternative uses of the reflection are briefly discussed as a beneficial adjuncts to the system
Electrical conductivity cell and method for fabricating the same
A flask having a threaded neck and a cap adapted for threaded engagement on the neck are used. A laminated disc between the cap and the neck forms a gas tight seal and the cap has a central opening that exposes a medial region of the disc. Piercing the disc through the opening are two electrodes, the inner ends of which contact the sample within the flask and the outer ends of which can be connected to test equipment. Cylindric glass tubes are fitted over the external portion of the electrodes to provide physical support and silicone rubber or a similar material serves to retain the glass cylinders in place and form a gas tight seal between the cylinders and the electrodes. Shrinkable tubing is shrunk over the glass tubes to afford further mechanical support and sealing. A final relatively large diameter shrinkable tube is shrunk over both electrodes and their associated glass cylinders. The support and sealing means for the electrodes is confined to a limited portion of the medial region of the disc so that the remainder of such region can be punctured by a hollow needle to introduce a test sample within the flask
Space Resources and Space Settlements
The technical papers from the five tasks groups that took part in the 1977 Ames Summer Study on Space Settlements and Industrialization Using Nonterrestrial Materials are presented. The papers are presented under the following general topics: (1) research needs for regenerative life-support systems; (2) habitat design; (3) dynamics and design of electromagnetic mass drivers; (4) asteroids as resources for space manufacturing; and (5) processing of nonterrestrial materials
Advanced Automation for Space Missions
The feasibility of using machine intelligence, including automation and robotics, in future space missions was studied
Turbulence Time Series Data Hole Filling using Karhunen-Loeve and ARIMA methods
Measurements of optical turbulence time series data using unattended
instruments over long time intervals inevitably lead to data drop-outs or
degraded signals. We present a comparison of methods using both Principal
Component Analysis, which is also known as the Karhunen--Loeve decomposition,
and ARIMA that seek to correct for these event-induced and mechanically-induced
signal drop-outs and degradations. We report on the quality of the correction
by examining the Intrinsic Mode Functions generated by Empirical Mode
Decomposition. The data studied are optical turbulence parameter time series
from a commercial long path length optical anemometer/scintillometer, measured
over several hundred metres in outdoor environments.Comment: 8 pages, 9 figures, submitted to ICOLAD 2007, City University,
London, U
Properties of the H-alpha-emitting Circumstellar Regions of Be Stars
Long-baseline interferometric observations obtained with the Navy Prototype
Optical Interferometer of the H-alpha-emitting envelopes of the Be stars eta
Tauri and beta Canis Minoris are presented. For compatibility with the
previously published interferometric results in the literature of other Be
stars, circularly symmetric and elliptical Gaussian models were fitted to the
calibrated H-alpha observations. The models are sufficient in characterizing
the angular distribution of the H-alpha-emitting circumstellar material
associated with these Be stars. To study the correlations between the various
model parameters and the stellar properties, the model parameters for eta Tau
and beta CMi were combined with data for other Be stars from the literature.
After accounting for the different distances to the sources and stellar
continuum flux levels, it was possible to study the relationship between the
net H-alpha emission and the physical extent of the H-alpha-emitting
circumstellar region. A clear dependence of the net H-alpha emission on the
linear size of the emitting region is demonstrated and these results are
consistent with an optically thick line emission that is directly proportional
to the effective area of the emitting disk. Within the small sample of stars
considered in this analysis, no clear dependence on the spectral type or
stellar rotation is found, although the results do suggest that hotter stars
might have more extended H-alpha-emitting regions.Comment: 24 pages, 16 figures, accepted for publication in Ap
Plant use of the Maasai of Sekenani Valley, Maasai Mara, Kenya
Traditional plant use is of tremendous importance in many societies, including most rural African communities. This knowledge is however, rapidly dwindling due to changes towards a more Western lifestyle, and the influence of modern tourism. In case of the Sekenani Maasai, the recent change from a nomadic to a more sedentary lifestyle has not, thus far lead to a dramatic loss of traditional plant knowledge, when compared to other Maasai communities. However, in Sekenani, plants are used much less frequently for manufacturing tools, and for veterinary purposes, than in more remote areas. While the knowledge is still present, overgrazing and over-exploitation of plant resources have already led to a decline of the plant material available. This paper examines the plant use of the Maasai in the Sekenani Valley, North of the Masaai Mara National Reserve. The Maasai pastoralists of Kenya and Tanzania use a large part of the plants in their environment for many uses in daily life. The plant use and knowledge of the Sekenani Maasai is of particular interest, as their clan, the "Il-Purko", was moved from Central Kenya to this region by the British Colonial Administration in 1904. The results of this study indicate that despite their relocation 100 years ago, the local population has an extensive knowledge of the plants in their surroundings, and they ascribe uses to a large percentage of the plants found. One-hundred-fifty-five plant species were collected, identified and their Maa names and traditional uses recorded. Although fifty-one species were reported as of "no use", only eighteen of these had no Maasai name. Thirty-three were recognized by a distinctive Maa name. Thirty-nine species had a medicinal use, and 30 species served as fodder for livestock. Six species could not be identified. Of these plants five were addressed by the Maasai with distinct names. This exemplifies the Sekenani Maasai's in-depth knowledge of the plant resources. Traditionally, the Maasai attribute most illnesses to the effect of pollutants that block or inhibit digestion. These pollutants can include "polluted" food, contact with sick people and witchcraft. In most cases the treatment of illness involves herbal purgatives to cleanse the patient. There are alsofrequent indications of plant use for common problems like wounds, parasites, body aches and burns
- …