46 research outputs found
Co-digestion of macroalgae for biogas production: an LCA-based environmental evaluation
Algae represent a favourable and potentially sustainable source of biomass for bioenergy-based industrial pathways in the future.
The study, performed on a real pilot plant implemented in Augusta (Italy) within the frame of the BioWALK4Biofuels project,
aims to figure out whether seaweed (macroalgae) cultivated in near-shore open ponds could be considered a beneficial aspect as a
source of biomass for biogas production within the co-digestion with local agricultural biological waste. The LCA results
confirm that the analysed A and B scenarios (namely the algae-based co-digestion scenario and agricultural mix feedstock
scenario) present an environmental performance more favourable than that achieved with conventional non-renewable-based
technologies (specifically natural gas - Scenario C). Results show that the use of seaweed (Scenario A) represent a feasible
solution in order to replace classical biomass used for biofuel production from a land-based feedstock. The improvement of the
environmental performances is quantifiable on 10% respect to Scenario B, and 38 times higher than Scenario
Brief communication "Landslide Early Warning System: toolbox and general concepts"
We define landslide Early Warning Systems and present practical guidelines to assist end-users with limited experience in the design of landslide Early Warning Systems (EWSs). <br><br> In particular, two flow chart-based tools coming from the results of the SafeLand project (7th Framework Program) have been created to make them as simple and general as possible and in compliance with a variety of landslide types and settings at single slope scale. We point out that it is not possible to cover all the real landslide early warning situations that might occur, therefore it will be necessary for end-users to adapt the procedure to local peculiarities of the locations where the landslide EWS will be operated
Design and implementation of a landslide early warning system
Abstract In this paper all the phases for the realization of the early warning system for the rockslide of Torgiovannetto in Central Italy are described. The landslide consists in a 182,000 m3 rock wedge threatening two roads which are important for local transportation. The present work encompasses all the components of an early warning system, including the geological knowledge, the risk scenarios, the kinematic characterization of the landslide, the choice and installation of the monitoring system, the setting of appropriate alarm levels and the definition of plans of civil protection. The focus is on practical and logistical issues met in all these phases and the counter-measures adopted. At present the system consists in 13 wire extensometers, 1 thermometer, 1 rain gauge and 3 cameras. Should a velocity threshold be exceeded by two or more sensors, the attention level would be entered, causing improved monitoring and surveillance. In case the behavior of the landslide changes and, by using expert judgment and forecasting methods, an imminent failure is hinted, then an alarm is issued and the upper road is closed. This paper can provide ideas and solutions for a landslide early warning system that aims to be simple, flexible, versatile and with a low probability of giving false alarms
Combined Finite–Discrete Numerical Modeling of Runout of the Torgiovannetto di Assisi Rockslide in Central Italy
The combined finite–discrete-element method (FDEM) is an advanced and relatively new numerical modeling technique that combines the features of the FEM with those of the discrete-element method. It simulates the transition of brittle geomaterials from continua to discontinua through fracture growth, coalescence, and propagation. With FDEM, it is possible to simulate landslides from triggering to runout and carry out landslide scenario analyses, the results of which can be successively adopted for cost-effective early warning systems. The purpose of this paper is to describe the results of the FDEM simulations of the triggering mechanism and the evolution scenarios of the Torgiovannetto di Assisi rockslide (central Italy), a depleted limestone quarry face where a rock wedge with an approximate volume of 182,000 m3 lies in limit equilibrium conditions, posing relevant issues in terms of civil protection. The results obtained demonstrate that the FDEM is able to realistically simulate the different phases of such a complex slope’s failure as well as to estimate both its runout distances and velocity, key features for landslide risk assessment, and management
Guidelines on the use of inverse velocity method as a tool for setting alarm thresholds and forecasting landslides and structure collapses
Guidelines on the use of inverse velocity method as a tool for setting alarm thresholds and forecasting landslides and structure collapses
Predicting the time of failure is a topic of major concern in the field of geological risk management. Several approaches, based on the analysis of displacement monitoring data, have been proposed in recent years to deal with the issue. Among these, the inverse velocity method surely demonstrated its effectiveness in anticipating the time of collapse of rock slopes displaying accelerating trends of deformation rate. However, inferring suitable linear trend lines and deducing reliable failure predictions from inverse velocity plots are processes that may be hampered by the noise present in the measurements; data smoothing is therefore a very important phase of inverse velocity analyses. In this study, different filters are tested on velocity time series from four case studies of geomechanical failure in order to improve, in retrospect, the reliability of failure predictions: Specifically, three major landslides and the collapse of an historical city wall in Italy have been examined. The effects of noise on the interpretation of inverse velocity graphs are also assessed. General guidelines to conveniently perform data smoothing, in relation to the specific characteristics of the acceleration phase, are deduced. Finally, with the aim of improving the practical use of the method and supporting the definition of emergency response plans, some standard procedures to automatically setup failure alarm levels are proposed. The thresholds which separate the alarm levels would be established without needing a long period of neither reference historical data nor calibration on past failure events