7,629 research outputs found
Reactive Strength Index Modified Is a Valid Measure of Explosiveness in Collegiate Female Volleyball Players
Kipp, K, Kiely, MT, and Geiser, CF. Reactive strength index modified is a valid measure of explosiveness in collegiate female volleyball players. J Strength Cond Res 30(5): 1341–1347, 2016—The purpose of this study was to investigate the validity of the reactive strength index modified (RSImod) as a measure of lower body explosiveness. Fifteen female, National Collegiate Athletic Association Division I volleyball players performed vertical countermovement jumps (CMJs) while standing on a force plate. Each player performed 3 CMJs. The vertical ground reaction forces collected during each jump were used to calculate jump height, time to take-off, time to peak force, peak force, peak rate of force development, and peak power; the latter 3 variables were all normalized to body mass. Reactive strength index modified was calculated as the ratio between jump height and time to take-off. All variables, except for jump height, were then entered a factor analysis, which reduced the input data into 2 factors: a force factor and a speed factor. Although RSImod loaded more strongly onto the force factor, further analysis showed that RSImod loaded positively onto both force and speed factors. Visual analysis of the Cartesian coordinates also showed that RSImod loaded into the quadrant of greater force and speed abilities. These results indicate that the construct of RSImod, as derived from CMJ force-time data, captures a combination of speed-force factors that can be interpreted as lower body explosiveness during the CMJ. Reactive strength index modified therefore seems to be a valid measure to study lower body explosiveness
Biomechanical Determinants of the Reactive Strength Index During Drop Jumps
The Reactive Strength Index (RSI) is often used to quantify drop-jump (DJ) performance; however, not much is known about its biomechanical determinants. The purpose of this study was to investigate the correlations between the RSI and several biomechanical variables calculated from DJ performed with different initial drop heights. Twelve male NCAA Division I basketball players performed DJs from drop heights of 30, 45, and 60 cm. Force plates were used to calculate DJ performance parameters (ie, DJ height, contact time, and RSI) and DJ biomechanical variables (ie, vertical stiffness and eccentric/concentric energetics). Regression analyses were used to assess the correlations between variables at each drop height, and ANOVAs were used to assess the differences of all variables across drop heights. Follow-up analyses used 2 neural networks to determine if DJ performance and biomechanical data could accurately classify DJ trials by drop-height condition. Vertical-stiffness values were significantly correlated with RSI at each height but did not change across drop heights. Surprisingly, the RSI and other DJ parameters also did not vary across drop height, which resulted in the inability of these variables to accurately classify DJ trials. Given that vertical stiffness did not change across drop height and was highly correlated with RSI at each height, the RSI appears to reflect biomechanical behavior related to vertical stiffness during DJ. However, the inability of the RSI to accurately classify drop-height condition questions the use of RSI profiles established from DJs from different heights
Mechanical Demands of the Hang Power Clean and Jump Shrug: A Joint-level Perspective
The purpose of this study was to investigate the joint- and load-dependent changes in the mechanical demands of the lower extremity joints during the hang power clean (HPC) and the jump shrug (JS). Fifteen male lacrosse players were recruited from an NCAA DI team, and completed three sets of the HPC and JS at 30%, 50%, and 70% of their HPC 1-Repetition Maximum (1-RM HPC) in a counterbalanced and randomized order. Motion analysis and force plate technology were used to calculate the positive work, propulsive phase duration, and peak concentric power at the hip, knee, and ankle joints. Separate three-way analysis of variances were used to determine the interaction and main effects of joint, load, and lift type on the three dependent variables. The results indicated that the mechanics during the HPC and JS exhibit joint-, load-, and lift-dependent behavior. When averaged across joints, the positive work during both lifts increased progressively with external load, but was greater during the JS at 30% and 50% of 1-RM HPC than during the HPC. The JS was also characterized by greater hip and knee work when averaged across loads. The joint-averaged propulsive phase duration was lower at 30% than at 50% and 70% of 1-RM HPC for both lifts. Furthermore, the load-averaged propulsive phase duration was greater for the hip than the knee and ankle joint. The jointaveraged peak concentric power was the greatest at 70% of 1-RM for the HPC and at 30% to 50% of 1-RM for the JS. In addition, the joint-averaged peak concentric power of the JS was greater than that of the HPC. Furthermore, the load-averaged peak knee and ankle concentric joint powers were greater during the execution of the JS than the HPC. However, the loadaveraged power of all joints differed only during the HPC, but was similar between the hip and knee joints for the JS. Collectively, these results indicate that compared to the HPC the JS is characterized by greater hip and knee positive joint work, and greater knee and ankle peak concentric joint power, especially if performed at 30 and 50% of 1-RM HPC. This study provides important novel information about the mechanical demands of two commonly used exercises and should be considered in the design of resistance training programs that aim to improve the explosiveness of the lower extremity joints
Competition Volume and Changes in Countermovement Jump Biomechanics and Motor Signatures in Female Collegiate Volleyball Players
Kipp, K, Kiely, M, and Geiser, C. Competition volume and changes in countermovement jump biomechanics and motor signatures in female collegiate volleyball players. J Strength Cond Res 35(4): 970–975, 2021—The purpose of this study was to investigate the relationship between competition volume and preseason to postseason changes in countermovement jump (CMJ) biomechanics and motor signatures in female collegiate volleyball players. Ten National Collegiate Athletic Association Division I female volleyball players performed CMJs on force plates before (PRE) and after (POST) their season. Countermovement jump height was calculated, and 4 discrete biomechanical variables (peak body-mass normalized force [PeakF], peak body-mass normalized rate of force development [PeakRFD], movement time [TIME], and the ratio between eccentric and total movement time [EccT:TIME]) were calculated. A factor analysis of the 4 biomechanical variables was used to identify CMJ motor signatures. The total number of sets played by each player was used to define total competition volume for the season. Correlation coefficients were used to investigate the associations between competition volume and changes in CMJ height, discrete biomechanical variables, and the components of the CMJ motor signature. The statistical analysis indicated that team-average jump height did not change over the course of the season. However, competition volume was negatively associated with changes in CMJ height, such that decreases in CMJ height over the course of the season occurred in players who played large numbers of sets. Although CMJ during POST testing was characterized by longer TIME and greater PeakRFD, CMJ motor signatures did not change and suggest that the female volleyball players in this study retained their preferred jumping strategy across the season. Given that decreases in CMJ height were most pronounced in players who played the most sets, and scored the most points during the season, future research may need to focus on player- or position-specific interventions that help players retain CMJ performance in the face of the competitive demands of a collegiate volleyball season
CHANGES IN PRINCIPAL COMPONENT STRUCTURE OF COUNTERMOVEMENT JUMPS AFTER A VOLLEYBALL SEASON
The purpose of this study was to investigate changes in the principal component structure of countermovement jumps (CMJ) in female volleyball players over the course of a competitive season. Eleven NCAA Division I female volleyball players performed CMJs on a force plate before and after a competitive season. Discrete biomechanical variables were extracted from the force-time records of all CMJs and entered into a factor analysis. The analysis yielded two factors that could account for the biomechanical structure of the CMJs: a temporal and a force factor. Although no differences in factor scores were identified between pre- and post-season testing sessions, sub-group analysis highlighted large individual changes in temporal and force factor scores
Phylogenetic diversity of insecticolous fusaria inferred from multilocus DNA sequence data and their molecular identification via FUSARIUM-ID and Fusarium MLST
We constructed several multilocus DNA sequence datasets to assess the phylogenetic diversity of insecticolous fusaria, especially focusing on those housed at the Agricultural Research Service Collection of Entomopathogenic Fungi (ARSEF), and to aid molecular identifications of unknowns via the FUSARIUM-ID and Fusarium MLST online databases and analysis packages. Analyses of a 190-taxon, two-locus dataset, which included 159 isolates from insects, indicated that: (i) insect-associated fusaria were nested within 10 species complexes spanning the phylogenetic breadth of Fusarium, (ii) novel, putatively unnamed insecticolous species were nested within 8/10 species complexes and (iii) Latin binomials could be applied with confidence to only 18/58 phylogenetically distinct fusaria associated with pest insects. Phylogenetic analyses of an 82-taxon, three-locus dataset nearly fully resolved evolutionary relationships among the 10 clades containing insecticolous fusaria. Multilocus typing of isolates within four species complexes identified surprisingly high genetic diversity in that 63/65 of the fusaria typed represented newly discovered haplotypes. The DNA sequence data, together with corrected ABI sequence chromatograms and alignments, have been uploaded to the following websites dedicated to identifying fusaria: FUSARIUM-ID (http://isolate.fusariumdb.org) a
Vigilant Keratinocytes Trigger PAMP Signaling in Response to Streptococcal M1 Protein.
The human skin exerts many functions in order to maintain its barrier integrity and protect the host from invading microorganisms. One such pathogen is Streptococcus pyogenes, which can cause a variety of superficial skin wounds that may eventually progress into invasive deep soft tissue infections. Here we show that keratinocytes recognize soluble M1 protein, a streptococcal virulence factor, as a PAMP to release alarming inflammatory responses. We found that this interaction initiates an inflammatory intracellular signaling cascade involving the activation of mitogen-activated kinases, ERK, p38 and JNK, and the subsequent induction and mobilization of the transcription factors NF-κB and AP-1. We also determined the imprint of inflammatory mediators released, such as IL-8, GROα, MIF, EMMPRIN, IL-1α, IL-1Ra, and ST2 in response to streptococcal M1 protein. The expression of IL-8 is dependent on TLR2 activity and subsequent activation of the MAP kinases ERK and p38. Notably this signaling seems distinct for IL-8 release and it is not shared with the other inflammatory mediators. We conclude that keratinocytes participate pro-inflammatory in streptococcal pattern recognition and that expression of the chemoattractant IL-8 by keratinocytes constitutes an important protective mechanism against streptococcal M1 protein
Remodeling of an in vitro microvessel exposed to cyclic mechanical stretch.
In the lung, vascular endothelial cells experience cyclic mechanical strain resulting from rhythmic breathing motions and intraluminal blood pressure. Mechanical stress creates evident physiological, morphological, biochemical, and gene expression changes in vascular endothelial cells. However, the exact mechanisms of the mechanical signal transduction into biological response remain to be clarified. Besides, the level of mechanical stress is difficult to determine due to the complexity of the local distension patterns in the lung and thus assumed to be the same as the one acting on the alveolar epithelium. Existing in vitro models used to investigate the effect of mechanical stretch on endothelial cells are usually limited to two-dimensional (2D) cell culture platforms, which poorly mimic the typical three-dimensional structure of the vessels. Therefore, the development of an advanced in vitro vasculature model that closely mimics the dynamic of the human lung vasculatures is highly needed. Here, we present the first study that investigates the interplay of the three-dimensional (3D) mechanical cyclic stretch and its magnitude with vascular endothelial growth factor (VEGF) stimulation on a 3D perfusable vasculature in vitro. We studied the effects of the cyclic strain on a perfusable 3D vasculature, either made of human lung microvascular endothelial cells or human umbilical vein endothelial cells embedded in a gel layer. The in vitro 3D vessels underwent both in-vivo-like longitudinal and circumferential deformations, simultaneously. Our results showed that the responses of the human lung microvascular endothelial cells and human umbilical vein endothelial cells to cyclic stretch were in good agreement. Although our 3D model was in agreement with 2D model in predicting a cytoskeletal remodeling in response to different magnitudes of cyclic stretch, however we observed several phenomena in 3D model that 2D model was unable to predict to. Angiogenic sprouting induced by VEGF decreased significantly in presence of cyclic stretch. Similarly, while treatment with VEGF increased vascular permeability, the cyclic stretch restored vascular barrier tightness and significantly decreased vascular permeability. One of the major findings of this study was that a 3D microvasculature can be exposed to a much higher mechanical cyclic stress level than reported in the literature without any dysfunction of its barrier. For higher magnitudes of the cyclic stretch, the applied longitudinal strain level was 14% and the associated circumferential strain reached the equivalent of 63%. In sharp contrast with our findings, such strain typically leads to the disruption of the endothelial barrier in a 2D stretching assay and is considered pathological. This highlights the importance of 3D modeling to investigate mechanobiology effects rather than using a simple endothelial monolayer which truly recapitulates the in vivo situation
Spin Liquid State in an Organic Mott Insulator with Triangular Lattice
H NMR and static susceptibility measurements have been performed in an
organic Mott insulator with nearly isotropic triangular lattice,
-(BEDT-TTF)Cu(CN), which is a model system of
frustrated quantum spins. The static susceptibility is described by the spin
= 1/2 antiferromagnetic triangular-lattice Heisenberg model with the
exchange constant 250 K. Regardless of the large magnetic
interactions, the H NMR spectra show no indication of long-range magnetic
ordering down to 32 mK, which is four-orders of magnitude smaller than .
These results suggest that a quantum spin liquid state is realized in the close
proximity of the superconducting state appearing under pressure.Comment: 4 pages, 4 figure
Bosentan therapy for chronic thromboembolic pulmonary hypertension. A national open label study assessing the effect of Bosentan on haemodynamics, exercise capacity, quality of life, safety and tolerability in patients with chronic thromboembolic pulmonary hypertension (BOCTEPH-Study).
we performed an open-label national study to evaluate the effects of Bosentan on haemodynamics, exercise capacity, quality of life, safety and tolerability in patients with chronic thromboembolic pulmonary hypertension (CTEPH).
fifteen patients with CTEPH not eligible or waiting for surgery were enrolled. The primary endpoint was the change in pulmonary vascular resistance (PVR). Secondary endpoints included quality of life (measured by the Minnesota living with heart failure questionnaire, MLHF), 6 minute walk distance (6MWD), World Health Organization (WHO) functional class, Borg dyspnoea scale, plasma endothelin, serum values of disease severity such as uric acid, N-terminal-pro brain natriuretic peptide (NTproBNP), C-reactive protein measured by a highly sensitive method (CRPs) and other serum and haemodynamic parameters.
after six months of treatment with bosentan, the PVR decreased from 852 (319) to 657(249) dyn*s*m-5 (p = 0.02). Quality of life considerably improved from a mean total score of 48(14) to 35(17) (p = 0.003) with improvements in the physical (from 25(5) to 17(7)) and emotional (from 11(6) to 6(5)) subscores (p = 0.005 and 0.011), respectively. The 6MWD improved from 389(78) to 443(79) meters (p = 0.005). 4 patients (27%) improved and 11 patients (73%) maintained their WHO class with no deterioration during the six months of bosentan treatment (p = 0.02). Uric acid serum levels declined from 525(145) to 453(151) micromol/l (p = 0.006), NTproBNP and CRPs declined insignificantly. Endothelin serum levels increased from 4.3(1.5) to 5.9(2.2) pg/ml (p = 0.025). Patients tolerated the treatment well, and there were no severe adverse events or deaths.
this open-label study suggests a beneficial effect of bosentan therapy not only on pulmonary haemodynamics, but also on quality of life and exercise capacity for patients with severe CTEPH
- …