Utilization of galactomannan from Gleditsia triacanthos in polysaccharide-based films : effects of interactions between film constituents on film properties

The objective of this work was to evaluate the effect of the concentrations of Gleditsia triacanthos galactomannan and glycerol and the presence of corn oil in the physical properties of edible films. The influence of interactions between those constituents on films' permeability to gases (water vapour, CO2 and O2), solubility in water, mechanical properties and colour was evaluated. The effects of those variables were analysed according to a 23 factorial design; regression coefficients were used to understand the influence of each variable (factor) on the studied properties, and a multifactor model was developed. Results show that galactomannan concentration is the most significant factor affecting the studied properties; moreover, the increase of plasticizer concentration and the presence of oil showed to be the most influent in the particular cases of solubility and transport properties (water vapour permeability and O2 permeability), respectively. These results show that galactomannan films' properties can be tailored to allow their use as alternative to non-biodegradable, non-edible packaging materials.The author M. A. Cerqueira is recipient of a fellowship from Fundacao para a Ciencia e Tecnologia (FCT, SFRH/BPD/72753/2010) and B. W. S. Souza is a recipient of a fellowship from the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior, Brazil (Capes, Brazil)

Effects of interactions between the constituents of chitosan-edible films on their physical properties

The main objective of this work was to evaluate the effect of chitosan and plasticizer concentrations and oil presence on the physical and mechanical properties of edible films. The effect of the film constituents and their in-between interactions were studied through the evaluation of permeability, opacity and mechanical properties. The effects of the studied variables (concentrations of chitosan, plasticizer and oil) were analysed according to a 2 3 factorial design. Pareto charts were used to identify the most significant factors in the studied properties (water vapour, oxygen and carbon dioxide permeability; opacity; tensile strength; elongation at break and Young's modulus). When addressing the influence of the interactions between the films' constituents on the properties above, results show that chitosan and plasticizer concentrations are the most significant factors affecting most of the studied properties, while oil incorporation has shown to be of a great importance in the particular case of transport properties (gas permeability), essentially due to its hydrophobicity. Water vapour permeability values (ranging from 1. 62 × 10 -11 to 4. 24 × 10 -11 g m -1 s -1 Pa -1) were half of those reported for cellophane films. Also the mechanical properties (tensile strength values from 0. 43 to 13. 72 MPa and elongation-at-break values from 58. 62% to 166. 70%) were in the range of those reported for LDPE and HDPE. Based on these results, we recommend the use of 1. 5% (w/w) chitosan concentration to produce films, where the oil and plasticizer proportions will have to be adjusted in a case-by-case basis according to the use intended for the material. This work provides a useful guide to the formulation of chitosan-based film-forming solutions for food packaging applications.The author MA Cerqueira is a recipient of a fellowship from Fundacao para a Ciencia e Tecnologia (FCT, SFRH/BD/23897/2005) and BWS Souza is a recipient of a fellowship from the Coordenacao Aperfeicoamento de Pessoal de Nivel Superior, Brazil (Capes, Brazil)

Physical characterisation of an alginate/lysozyme nano-laminate coating and its evaluation on ‘coalho’ cheese shelf life

This work aimed at the characterisation of a nanolaminate coating produced by the layer-by-layer methodology and its evaluation on the preservation of ‘Coalho’ cheese. Initially, five alternate layers of alginate and lysozyme were assembled in an aminolysed/charged polyethylene terephthalate (A/C PET) and physically characterised by UV/VIS spectroscopy, contact angle, water vapour (WVTR) and oxygen (OTR) transmission rates and scanning electron microscopy. Afterwards, the same methodology was used to apply the nano-laminate coating in ‘Coalho’ cheese and its shelf life was evaluated during 20 days in terms of mass loss, pH, lipid peroxidation, titratable acidity and microbial count. UV/VIS spectroscopy and contact angle analyses confirmed the layers’ deposition and the successful assembly of nano-laminate coating on A/C PET surface. The coating presented WVTR and OTR values of 1.03×10−3 and 1.28× 10−4 g m−2 s−1, respectively. After 20 days, coated cheese showed lower values of mass loss, pH, lipidic peroxidation, microorganisms’ proliferation and higher titratable acidity in comparison with uncoated cheese. These results suggest that gas barrier and antibacterial properties of alginate/lysozyme nanocoating can be used to extend the shelf life of ‘Coalho’ cheese.The author Bartolomeu G. de S. Medeiros is recipient of a scholarship from Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES-Brazil). The author Marthyna P. Souza is recipient of a scholarship from Fundacao de Amparo a Ciencia e Tecnologia do Estado de Pernambuco (FACEPE, Brazil) and was recipient of a scholarship from Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES/PDEE-Brazil). The authors Ana C. Pinheiro, Ana I. Bourbon and Miguel A. Cerqueira are recipients of a fellowship (SFRH/BD/48120/2008, SFRH/BD/73178/2010 and SFRH/BPD/72753/2010, respectively), supported by Fundacao para a Ciencia e Tecnologia, POPH-QREN and FSE (FCT, Portugal). Maria G. Carneiro-da-Cunha express is gratitude to the Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) for research grant. The present work was supported by CAPES/PROCAD/NF/1415/2007. The support of EU Cost Action FA0904 is gratefully acknowledged

Perspectives on utilization of edible coatings and nano-laminate coatings for extension of postharvest storage of fruits and vegetables

It is known that in developing countries, a large quantity of fruit and vegetable losses results at postharvest and processing stages due to poor or scarce storage technology and mishandling during harvest. The use of new and innovative technologies for reducing postharvest losses is a requirement that has not been fully covered. The use of edible coatings (mainly based on biopolymers) as a postharvest technique for agricultural commodities has offered biodegradable alternatives in order to solve problems (e.g., microbiological growth) during produce storage. However, biopolymer-based coatings can present some disadvantages such as: poor mechanical properties (e.g., lipids) or poor water vapor barrier properties (e.g., polysaccharides), thus requiring the development of new alternatives to solve these drawbacks. Recently, nanotechnology has emerged as a promising tool in the food processing industry, providing new insights about postharvest technologies on produce storage. Nanotechnological approaches can contribute through the design of functional packing materials with lower amounts of bioactive ingredients, better gas and mechanical properties and with reduced impact on the sensorial qualities of the fruits and vegetables. This work reviews some of the main factors involved in postharvest losses and new technologies for extension of postharvest storage of fruits and vegetables, focused on perspective uses of edible coatings and nano-laminate coatings.María L. Flores-López thanks Mexican Science and Technology Council (CONACYT, Mexico) for PhD fellowship support (CONACYT Grant Number: 215499/310847). Miguel A. Cerqueira (SFRH/BPD/72753/2010) is recipient of a fellowship from the Fundação para a Ciência e Tecnologia (FCT, POPH-QREN and FSE Portugal). The authors also thank the FCT Strategic Project of UID/ BIO/04469/2013 unit, the project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and the project ‘‘BioInd Biotechnology and Bioengineering for improved Industrial and AgroFood processes,’’ REF. NORTE-07-0124-FEDER-000028 Co-funded by the Programa Operacional Regional do Norte (ON.2 – O Novo Norte), QREN, FEDER. Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico – FUNCAP, CE Brazil (CI10080-00055.01.00/13)

Effects of Gellan-Based Edible Coating on the Quality of Fresh-Cut Pineapple During Cold Storage

The effects of gellan-based [gellan gum 0.56 % (w/v), glycerol 0.89 % (w/v) and sunflower oil 0.025 % (w/v)] edible coating on the respiration rate, physico-chemical properties and microbiological and sensory quality of fresh-cut pineapple during 16 days of storage (5 ± 1 °C, 85 ± 10 % RH) were evaluated. Uncoated fresh-cut pineapple was stored under the same condition and served as the control. For cross-linking reaction which was necessary for gel formation of gellan gum, a 2 % (w/v) calcium chloride solution that contained 1 % (w/v) ascorbic acid and 1 % (w/v) citric acid (as antibrowning agents) was used. The results obtained show that the respiration rate and weight loss of gellan-based coated samples were significantly (p  0.05) differences were found among total plate counts and yeast and mould counts for coated and uncoated samples. Total plate counts and yeast and mould counts for coated and uncoated samples reached 106 CFU/g (limit of shelf life acceptance for fruit-based products recommended by the Institute of Food Science and Technology in the UK) after 12 days of storage at 5 °C. In addition, the scores for all sensory characteristics at day 12 were significantly (p < 0.05) higher in coated samples as compared to control. Therefore, the results obtained in this study indicate that gellan-based edible coating formulation has the potential to maintain the quality of fresh-cut pineapple during low-temperature storage for about 12 days

Coatings in the postharvest

The development of new edible coatings (ECs) with improved functionality and performance for fresh and minimally processed fruits and vegetables is one of the challenges of the postharvest industry. This technique has been successful not only in reducing water loss and delaying senescence, but also in increasing the antimicrobial properties of the coated product. The new generation of ECs is specially designed to allow the incorporation and/or controlled release of antioxidants, vitamins, nutraceuticals and natural antimicrobial agents by means of the application of promising technologies such as nanoencapsulation and layer-by-layer (LbL) assembly. This review analyzes the maintenance of postharvest quality through the application of new ECs on fresh products that cover the use of nanoemulsions,nanoparticles, nanofibers and LbL as techniques to form active edible coatings and films.Fil: Ansorena, Maria Roberta. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata; Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Química. Grupo de Investigación en Ingeniería en Alimentos; ArgentinaFil: Ponce, Alejandra Graciela. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata; Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Química. Grupo de Investigación en Ingeniería en Alimentos; Argentin