CAC-TCP cross-layer interaction in a HAPS-satellite integrated scenario

The integration of a satellite system with a HAPS segment appears very suitable to provide communication services, including Internet access, for a large set of applications. In fact, the-satellite capability to provide wide coverage and broadband access can be enhanced by the use of cost-effective, mobile/portable and low-power consuming user terminals, when HAPS acts as an intermediate repeater. Moreover, also TCP-based applications, which suffer from long latency introduced by the satellite link and in general by errors, can get benefits in terms of end-to-end performance. In this frame, this paper deals with the introduction, on board the HAPS, of an efficient CAC scheme in order to guarantee an optimal utilization of the precious radio resources. In particular, we propose an innovative TCP driven CAC algorithm, which shall take into account not only the QoS requirements, but also TCP statistics obtained through a proxy installed on the HAPS. Results show that the overall system performance in terms of both average throughput and blocking probability is significantly improved

A TCP Driven CAC scheme: efficient resource utilization in a leaky HAP-satellite integrated scenario

An integrated high altitude platform (HAP)-satellite communication system appears to be very suitable for a large set of scenarios including emergency situations, exceptional events, etc. In fact, the satellite capability to provide a broadband and ubiquitous access can be enhanced by the deployment of HAP that allows the use of low-power consuming, cost-efficient, and portable terminals. To obtain an optimum utilization of radio resource, without renouncing to QoS satisfaction, a suitable call admission control scheme must be implemented. Nevertheless, transmission control protocol (TCP) behavior, mainly affected by the high latency and shadowing events, can impact call admission control (CAC) performance. Therefore, it would be desirable that the CAC scheme takes into account also the TCP congestion window real evolution. We present an innovative CAC scheme that uses TCP statistics as one of its inputs and is able to manage different classes of users. Results show that CAC performance is significantly improved by introducing TCP statistics about network congestion as an input parameter

Cross-layer architecture for a satellite-Wi-Fi efficient handover

To achieve fully mobile communications, considering different environments and modern service requirements, a multiple-segment architecture is the most suitable to guarantee service continuity with acceptable performance. Handover (HO) procedures can be invoked either out of necessity (if the current network connection is going off) or to improve performance (if different bandwidth or quality of service is required). In this scenario, to provide uninterrupted communication services, efficient intersegment HO capability must be implemented. The architecture considered includes a satellite segment and a number of Wi-Fi hot spots. A mobile node (MN) can switch from a segment to other exploiting services of mobile Internet protocol (MIP). This architecture introduces great flexibility and ensures capillary coverage; it also strongly affects Transmission Control Protocol (TCP)-based application performance. To efficiently face HO consequences, particularly when the TCP runs as a transport protocol, an innovative protocol architecture based on cross-layer (CL) exchange of information is proposed. Analyses of TCP dynamics during HOs and the performance improvement introduced with the proposed CL architecture, evaluated through the network simulator Ns-2, are presented

A cross-layer architecture for satellite network security: CL-IPsec

Cross-layer architectures (CLAs) are proposed to improve performance in networks where physical layer impairments are unpredictable and provision of security services may be challenging, as in satellite networks. This paper proposes an extension to the IPsec protocol, named Cross-Layer IPsec (CL-IPsec), able to provide authentication and integrity services through a cross-layer architecture when the adopted protocol is UDP-Lite. This is suitable for multicast applications that are cost-effectively provided by satellite systems. A satellite emulation platform has been used to validate the CL-IPsec implementation and to evaluate the performance improvement derived from the proposed CLA. © 2008 IEEE

Network layer security: Design for a cross layer architecture

Traditional modular layering schemes have served a major part in the development of a variety of protocols. However, as the physical layer impairments become more unpredictable, a cross layer design (CLD) which is dynamic in nature provides better performance. CLD introduces new challenges in protocol design as well as in the area of security. Using numerical analysis, we show that a link layer design employing header compression and cross layer signalling to protect protocol headers can limit packet discarding. This paper also reviews the IPsec protocol and describes how IPsec can be modified for cross layer architecture. © 2007 IEEE

The first case of acinic cell carcinoma of the breast within a fibroadenoma: Case report

AbstractA case of acinic cell carcinoma of the breast is reported in a 26-year-old woman. She presented a lump in her right breast, that seemed to be a fibroadenoma. The open biopsy revealed a well-bordered fibroadenoma, together with a proliferation of cells characterized by serous acinar differentiation and eosinophilic cytoplasmic granules. Tumor cells stained for amylase, lysozyme, α-1-antichymotripsin, epithelial membrane antigen, S-100 protein, pan-cytokeratin, cytokeratin 7 and E-cadherin. Estrogen receptor, progesterone receptor, human epidermal growth factor receptor 2 overexpression, CD10, P63, smooth muscle actin, cytokeratin 5/6 were negative. The sentinel node was negative. 8 months after surgery she is in good clinical conditions without recurrence or metastases

Brief comments on three existing approaches for managing neonates at risk of early-onset sepsis

Background: Growing concerns regarding the adverse effects of antibiotics during the first days of life and the marked reduction in the incidence of early-onset sepsis (EOS) are changing the clinical practice for managing neonates at risk of EOS. Strategies avoiding unnecessary antibiotics while promoting mother-infant bonding and breastfeeding deserve to be considered. Main body: We compare strategies for managing newborns at risk of EOS recommended by the American Academy of Pediatrics, which are among the most followed recommendations worldwide. Currently three different approaches are suggested in asymptomatic full-term or late preterm neonates: i) the conventional management, based on standard perinatal risk factors for EOS alone, ii) the neonatal sepsis calculator, a multivariate risk assessment based on individualized, quantitative risk estimates (relying on maternal risk factors for EOS) combined with physical examination findings at birth and in the following hours and iii) an approach entirely based on newborn clinical condition (serial clinical observation) during the first 48 h of life. We discuss advantages and limitations of these approaches, by analyzing studies supporting each strategy. Approximately 40% of infants who develop EOS cannot be identified on the basis of maternal RFs or laboratory tests, therefore close monitoring of the asymptomatic but at-risk infant remains crucial. A key question is to know what proportion of babies with mild, unspecific symptoms at birth can be managed safely without giving antibiotics. Conclusions: Both neonatal sepsis calculator and serial clinical observation may miss cases of EOS, and clinical vigilance for all neonates is essential There is a need to assess which symptoms at birth are more predictive of EOS, and therefore require immediate interventions, or symptoms that can be carefully reevaluated without necessarily treat immediately the neonate with antibiotics. Studies comparing strategies for managing neonates are recommended

Trampling Analysis of Autonomous Mowers: Implications on Garden Designs

Several trials have been carried out by various authors concerning autonomous mowers, which are battery-powered machines. The effects of these machines on turfgrass quality and energy consumption have been thoroughly investigated. However, there are still some aspects that have not been studied. Among these, random trajectory overlapping is one of the most important. To investigate these aspects, two RTK-GPS devices along with the custom-built software used for previous trials has been upgraded in order to precisely calculate how many times the mower drives over the same spot using random trajectories. This parameter, the number of passages in the same position, was hypothesized to explain the autonomous mower's overlapping and trampling action. The trial has been carried out testing a commercial autonomous mower on three areas with different levels of complexity to assess its performances. The following variables were examined: the percentage of mowed area, the distance travelled, the number of intersections, the number of passages, and the autonomous mower's work efficiency. The average percentage of area mown (average value for the three areas) was 54.64% after one hour and 80.15% after two hours of work. Percentage of area mown was 15% higher for the area with no obstacles after two hours of work. The number of passages was slightly different among the three garden designs. The garden with no obstacles obtained the highest number of passages with an average of 37 passages. The highest working efficiency was obtained in the garden with an intermediate number of obstacles with a value of 0.40 after two hours of work. The estimated energy consumption resulted 0.31 Wh m(-2) after one hour and 0.42 Wh m(-2) after two hours of working. These results highlight how the correct settings of cutting time may be crucial to consistently save energy during the long period and may be useful for a complete automation of the maintenance of green areas

Looking at NB-IoT over LEO Satellite Systems: Design and Evaluation of a Service-Oriented Solution

The adoption of the NB-IoT technology in satellite communications intends to boost Internet of Things services beyond the boundaries imposed by the current terrestrial infrastructures. Apart from link-level studies in the scientific literature and preliminary 3GPP technical reports, the overall debate is still open. To provide a further step forward in this direction, the work presented herein pursues a novel service-oriented methodology to design an effective solution, meticulously stitched around application requirements and technological constraints. To this end, it conducts link-level and system-level investigations to tune physical transmissions, satellite constellation, and protocol architecture, while ensuring the expected system behavior. To offer a real smart agriculture service operating in Europe, the resulting solution exploits 24 Low Earth Orbit satellites, grouped into 8 different orbits, moving at an altitude of 500 km. The configured protocol stack supports the transmission of tens of bytes generated at the application layer, by also counteracting the issues introduced by the satellite link. Since each satellite has the whole protocol stack on-board, terminals can transmit data without the need for the feeder link. This ensures communication latencies ranging from 16 minutes to 75 minutes, depending on the served number of terminals and the physical transmission settings. Moreover, the usage of the Early Data Transmission scheme reduces communication latencies up to 40%. These results pave the way towards the deployment of an effective proof-of-concept, which drastically reduces the time-to-market imposed by the current state of the art