22 research outputs found
Performance of digital silicon photomultipliers for time of flight PET scanners
The performance of Digital Silicon Photomultipliers (dSiPM) coupled to a LYSO array containing 15×15 pixels with a size of 2×2×22 mm3 is evaluated to determinate their potential for whole body Time of Flight (TOF) PET scanners. The detector pixels are smaller in size than the light sensors and therefore light spreading is required to determine the crystal where interaction occurred. A light guide of 1 mm was used to spread the light and neighbor logic (NL) configuration were employed to ensure correct crystals identification. We studied the energy resolution and coincidence resolving time (CRT) for different trigger levels. The measured average energy resolution across detector was 14.5 %. Prior to measurements of time resolution skew time calibration of dSiPM was performed. The average CRT achieved using trigger level 1 option was 376 ps FWHM. Finally, we studied the amount of events that are disregarded due to dark count effects for different trigger levels and temperatures. Our studies show that a trade-off must be made between the detector’s CRT and sensitivity due to its vulnerability to dark counts. To employ dSiPM in TOF PET systems without 1:1 coupling effective cooling is necessary to limit dark count influence
Clinical consequences of relative biological effectiveness variations in proton radiotherapy of the prostate, brain and liver
Proton relative biological effectiveness (RBE) is known to depend on the (alpha/beta)(x) of irradiated tissues, with evidence of similar to 60% variation over (alpha/beta)(x) values from 1-10 Gy. The range of (alpha/beta)(x) values reported for prostate tumors (1.2-5.0 Gy), brain tumors (10-15 Gy) and liver tumors (13-17 Gy) imply that the proton RBE for these tissues could vary significantly compared to the commonly used generic value of 1.1. Our aim is to evaluate the impact of this uncertainty on the proton dose in Gy(RBE) absorbed in normal and tumor tissues. This evaluation was performed for standard and hypofractionated regimens. RBE-weighted total dose (RWTD) distributions for 15 patients (five prostate tumors, five brain tumors and five liver tumors) were calculated using an in-house developed RBE model as a function of dose, dose-averaged linear energy transfer (LETd) and (alpha/beta)(x). Variations of the dose-volume histograms (DVHs) for the gross tumor volume (GTV) and the organs at risk due to changes of (alpha/beta)(x) and fractionation regimen were calculated and the RWTD received by 10% and 90% of the organ volume reported. The goodness of the plan, bearing the uncertainties, was then evaluated compared to the delivered plan, which considers a constant RBE of 1.1. For standard fractionated regimens, the prostate tumors, liver tumors and all critical structures in the brain showed typically larger RBE values than 1.1. However, in hypofractionated regimens lower values of RBE than 1.1 were observed in most cases. Based on DVH analysis we found that the RBE variations were clinically significant in particular for the prostate GTV and the critical structures in the brain. Despite the uncertainties in the biological input parameters when estimating RBE values, the results show that the use of a variable RBE with dose, LETd and (alpha/beta)(x) could help to further optimize the target dose in proton treatment planning. Most importantly, this study shows that the consideration of RBE variations could influence the comparison of proton and photon treatments in clinical trials, in particular in the case of the prostate
Effects of dark counts on digital silicon photomultipliers performance
Digital Silicon Photomultipliers (dSiPM) are novel light detector that integrates single-photon avalanche photodiodes and CMOS logic into a single silicon chip and have been used for developing new, high performance detectors for Positron Emission Tomography (PET). As a solid-state devices they suffer from thermal excitation what leads to the appearance of noise events called dark counts. However, it is unclear what effect the dark counts have on the count rate performance of dSiPM. Therefore, it is necessary to investigate the event loss caused by these dark counts and to come up with optimal configuration of these devices. Here, the effects of dark counts on the performance of are evaluated. Due to the trigger architecture of dSiPM, dark counts cause start of acquisition sequence of the device. Processing of these dark counts leads to dead time of dSiPM what cause the loss of true gamma events. We studied how trigger level, validation level and validation length influence the loss of events due to dark counts. We found that validation time should be kept long (40 ns) to minimize the loss of events. Use of high trigger level and validation level also reduce the event loss caused by dark counts. However, with the high validation level, detection of events with low number of optical photons is reduced as it more difficult for these events to pass the validation threshold. The RTL refresh option was also tested to reduce the effect of dark counts. We found that this option resulted in the achieving maximum sensitivity, i.e. the highest fraction of correctly recorded true events, of dSiPM regardless of used validation and trigger levels. In cases when the scintillation light is spread over several dies, we found that the use of RTL refresh option combined with a low validation level in order to guarantee the individual validation of all required dies ensures higher sensitivity than the use of Neighbor Logic (NL). Finally we verified the dead time of dSiPM and found that is longer than specified and equal to 50 ns
Design of a realistic PET-CT-MRI phantom
The validation of the PET image quality of new PET-MRI systems should be done against the image quality of currently available PET-CT systems. This includes the validation of new attenuation correction methods. Such validation studies should preferentially be done using a phantom. There are currently no phantoms that have a realistic appearance on PET, CT and MRI. In this work we present the design and evaluation of such a phantom. The four most important tissue types for attenuation correction are air, lung, soft tissue and bone. An attenuation correction phantom should therefore contain these four tissue types. As it is difficult to mimic bone and lung on all three modalities using a synthetic material, we propose the use of biological material obtained from cadavers. For the lung section a lobe of a pig lung was used. It was excised and inflated using a ventilator. For the bone section the middle section of a bovine femur was used. Both parts were fixed inside a PMMA cylinder with radius 10 cm. The phantom was filled with 18F-FDG and two hot spheres and one cold sphere were added. First a PET scan was acquired on a PET-CT system. Subsequently, a transmission measurement and a CT acquisition were done on the same system. Afterwards, the phantom was moved to the MRI facility and a UTE-MRI was acquired. Average CT values and MRI R 2 values in bone and lung were calculated to evaluate the realistic appearance of the phantom on both modalities. The PET data was reconstructed with CT-based, transmission-based and MRI-based attenuation correction. The activity in the hot and cold spheres in the images reconstructed using transmission-based and MRI-based attenuation correction was compared to the reconstructed activity using CT-based attenuation correction. The average CT values in lung and bone were -630 HU and 1300 HU respectively. The average R 2 values were 0.7 ms -1 and 1.05 ms -1 respectively. These values are comparable to the values observed in clinical data sets. Transmission-based and MRI-based attenuation correction yielded an average difference with CT- based attenuation correction in the hot spots of -22 % and -8 %. In the cold spot the average differences were +3 % and -8 %. The construction of a PET-CT-MRI phantom was described. The phantom has a realistic appearance on all three modalities. It was used to evaluate two attenuation correction methods for PET-MRI scanners
Evaluation of resistive-plate-chamber-based TOF-PET applied to in-beam particle therapy monitoring
Particle therapy is a highly conformal radiotherapy technique which reduces the dose deposited to the surrounding normal tissues. In order to fully exploit its advantages, treatment monitoring is necessary to minimize uncertainties related to the dose delivery. Up to now, the only clinically feasible technique for the monitoring of therapeutic irradiation with particle beams is Positron Emission Tomography (PET). In this work we have compared a Resistive Plate Chamber (RPC)-based PET scanner with a scintillation-crystal-based PET scanner for this application. In general, the main advantages of the RPC-PET system are its excellent timing resolution, low cost, and the possibility of building large area systems. We simulated a partial-ring scannerbeam monitoring, which has an intrinsically low positron yield compared to diagnostic PET. In addition, for in-beam PET there is a further data loss due to the partial ring configuration. In order to improve the performance of the RPC-based scanner, an improved version of the RPC detector (modifying the thickness of the gas and glass layers), providing a larger sensitivity, has been simulated and compared with an axially extended version of the crystal-based device. The improved version of the RPC shows better performance than the prototype, but the extended version of the crystal-based PET outperforms all other options. based on an RPC prototype under construction within the Fondazione per Adroterapia Oncologica (TERA). For comparison with the crystal-based PET scanner we have chosen the geometry of a commercially available PET scanner, the Philips Gemini TF. The coincidence time resolution used in the simulations takes into account the current achievable values as well as expected improvements of both technologies. Several scenarios (including patient data) have been simulated to evaluate the performance of different scanners. Initial results have shown that the low sensitivity of the RPC hampers its application to hadro
Fast calibration of SPECT monolithic scintillation detectors using un-collimated sources
Monolithic scintillation detectors for positron emission tomography and single-photon emission computed tomography (SPECT) imaging have many advantages over pixelated detectors. The use of monolithic crystals allows for reducing the scintillator cost per unit volume and increasing the sensitivity along with the energy and timing resolution of the detector. In addition, on thick detectors the depth-of-interaction can be determined without additional hardware. However, costly and complex calibration procedures have been proposed to achieve optimal detector performance for monolithic detectors. This hampers their use in commercial systems. There is thus, a need for simple calibration routines that can be performed on assembled systems. The main goal of this work is to develop a simplified calibration procedure based on acquired training data. In comparison with other methods that use training data acquired with beam sources attached to robotic stages, the proposed method uses a static un-collimated activity source with simple geometry acquiring in a reasonable time. Once the data are acquired, the calibration of the detector is accomplished in three steps: energy calibration based on the k-means clustering method, self-organization based on the self-organizing maps algorithm, and distortion correction based on the Monge-Kantorovich grid adaptation. The proposed calibration method was validated for 2D positioning using a SPECT detector. Similar results were obtained by comparison with an existing calibration method (maximum likelihood estimation). In conclusion, we proposed a novel calibration method for monolithic scintillation detectors that greatly simplifies their use with optimal performance in SPECT systems
Optimized light sharing for high-resolution TOF PET detector based on digital silicon photomultipliers
The majority of current whole-body PET scanners are based on pixelated scintillator arrays with a transverse pixel size of 4 mm. However, recent studies have shown that decreasing the pixel size to 2 mm can significantly improve image spatial resolution. In this study, the performance of Digital Photon Counter (DPC) from Philips Digital Photon Counting (PDPC) was evaluated to determine their potential for high-resolution whole-body time of flight (TOF) PET scanners. Two detector configurations were evaluated. First, the DPC3200-44-22 DPC array was coupled to a LYSO block of 15  ×  15 2  ×  2 × 22 mm3 pixels through a 1 mm thick light guide. Due to light sharing among the dies neighbour logic of the DPC was used. In a second setup the same DPC was coupled directly to a scalable 4  ×  4 LYSO matrix of 1.9  ×  1.9  ×  22 mm3 crystals with a dedicated reflector arrangement allowing for controlled light sharing patterns inside the matrix. With the first approach an average energy resolution of 14.5% and an average CRT of 376 ps were achieved. For the second configuration an average energy resolution of 11% and an average CRT of 295 ps were achieved. Our studies show that the DPC is a suitable photosensor for a high-resolution TOF-PET detector. The dedicated reflector arrangement allows one to achieve better performances than the light guide approach. The count loss, caused by dark counts, is overcome by fitting the matrix size to the size of DPC single die
Detector design for range monitoring in hadron therapy by means of image reconstruction
Hadron therapy offers some advantages over conventional therapy. However, small errors in particle range may significantly increase dose delivered to healthy tissue or produce incomplete coverage of the target volume. Consequently, developing a method to verify the delivered dose and Bragg peak location during treatment is crucial. Recent investigations have shown that the prompt gamma photons produced during the patient irradiation with hadron beams are in good correlation with the dose delivered to the patient and therefore, they can be used for in-beam range monitoring. Slit collimated gamma camera has been proposed as a system for prompt gamma imaging. Image reconstruction can potentially improve the accuracy of that system. The purpose of this work is to study and implement a reconstruction process for in-beam range monitoring using slit-collimated gamma camera. Obtained results will guide the design of the slit-collimated camera