11,279 research outputs found
Detection of a relic X-ray jet in Cygnus A
We present a 200 ks Chandra ACIS-I image of Cygnus A, and discuss a long
linear feature seen in its counterlobe. This feature has a non-thermal spectrum
and lies on the line connecting the brighter hotspot on the approaching side
and the nucleus. We therefore conclude that this feature is (or was) a jet.
However, the outer part of this X-ray jet does not trace the current counterjet
observed in radio. No X-ray counterpart is observed on the jet side. Using
light-travel time effects we conclude that this X-ray 50 kpc linear feature is
a relic jet that contains enough low-energy plasma (gamma ~ 10^3) to
inverse-Compton scatter cosmic microwave background photons, producing emission
in the X-rays.Comment: 4 pages. Proceedings of "High Energy Phenomena in Relativistic
Outflows", held in Dublin, Ireland, September 24-28, 200
Unsteady gravity-driven slender rivulets of a power-law fluid
Unsteady gravity-driven flow of a thin slender rivulet of a non-Newtonian power-law fluid on a plane inclined at an angle α to the horizontal is considered. Unsteady similarity solutions are obtained for both converging sessile rivulets (when 0 0 with t > 0, where x denotes a coordinate measured down the plane and t denotes time. Numerical and asymptotic methods are used to show that for each value of the power-law index N there are two physically realisable solutions, with cross-sectional profiles that are 'single-humped' and 'double-humped', respectively. Each solution predicts that at any time t the rivulet widens or narrows according to |x | (2N+1)/2(N+1) and thickens or thins according to |x | N/(N+1) as it flows down the plane; moreover, at any station x, it widens or narrows according to |t | −N/2(N+1) and thickens or thins according to |t | −N/(N+1). The length of a truncated rivulet of fixed volume is found to behave according to |t | N/(2N+1)
EFFECTS OF AN EXPORT SUBSIDY ON THE U.S. COTTON INDUSTRY
In this study, the effects of an export subsidy for cotton are analyzed using a linear elasticity model. The study explicitly addresses the interaction of current domestic policies with the proposed export subsidy. An export subsidy may be a successful method of reducing the government costs of the cotton program.International Relations/Trade,
Gravity-driven draining of a thin rivulet with constant width down a slowly varying substrate
The locally unidirectional gravity-driven draining of a thin rivulet with constant width but slowly varying contact angle down a slowly varying substrate is considered. Specifically, the flow of a rivulet in the azimuthal direction from the top to the bottom of a large horizontal cylinder is investigated. In particular, it is shown that, despite behaving the same locally, this flow has qualitatively different global behaviour from that of a rivulet with constant contact angle but slowly varying width. For example, whereas in the case of constant contact angle there is always a rivulet that runs all the way from the top to the bottom of the cylinder, in the case of constant width this is possible only for sufficiently narrow rivulets. Wider rivulets with constant width are possible only between the top of the cylinder and a critical azimuthal angle on the lower half of the cylinder. Assuming that the contact lines de-pin at this critical angle (where the contact angle is zero) the rivulet runs from the critical angle to the bottom of the cylinder with zero contact angle, monotonically decreasing width and monotonically increasing maximum thickness. The total mass of fluid on the cylinder is found to be a monotonically increasing function of the value of the constant width
Evaporation of a thin droplet on a thin substrate with a high thermal resistance
A mathematical model for the quasi-steady evaporation of a thin liquid droplet on a thin substrate that incorporates the dependence of the saturation concentration of vapour at the free surface of the droplet on temperature is used to examine an atypical situation in which the substrate has a high thermal resistance relative to the droplet (i.e. it is highly insulating and/or is thick relative to the droplet). In this situation diffusion of heat through the substrate is the rate-limiting evaporative process and at leading order the local mass flux is spatially uniform, the total evaporation rate is proportional to the surface area of the droplet, and the droplet is uniformly cooled. In particular, the qualitative differences between the predictions of the present model in this situation and those of the widely used 'basic' model in which the saturation concentration is independent of temperature are highlighted
Decentralized Constraint Satisfaction
We show that several important resource allocation problems in wireless
networks fit within the common framework of Constraint Satisfaction Problems
(CSPs). Inspired by the requirements of these applications, where variables are
located at distinct network devices that may not be able to communicate but may
interfere, we define natural criteria that a CSP solver must possess in order
to be practical. We term these algorithms decentralized CSP solvers. The best
known CSP solvers were designed for centralized problems and do not meet these
criteria. We introduce a stochastic decentralized CSP solver and prove that it
will find a solution in almost surely finite time, should one exist, also
showing it has many practically desirable properties. We benchmark the
algorithm's performance on a well-studied class of CSPs, random k-SAT,
illustrating that the time the algorithm takes to find a satisfying assignment
is competitive with stochastic centralized solvers on problems with order a
thousand variables despite its decentralized nature. We demonstrate the
solver's practical utility for the problems that motivated its introduction by
using it to find a non-interfering channel allocation for a network formed from
data from downtown Manhattan
Process performance measurement support : a critical analysis
Design development processes, within engineering disciplines, lack the necessary mechanisms in identifying the specific areas where improved design development performance may be obtained. In addition, they lack the means to consider and align the goals and respective performance levels of related development activities with an organisation's overall goals and performance levels. Current research in organisational performance behaviour, formalised through performance frameworks and methodologies, has attempted to identify and focus upon those critical factors which impinge upon a wealth creation system while attempting to, simultaneously, remain representative of organisational functions, processes, people, decisions and goals. Effective process improvements remain conditional upon: the ability to measure the potential performance gains which may result from an improvement initiative; the ability to understand existing process dynamics and in turn understand the subsequent impact of some change to a system/process; and, the ability to identify potential areas for improvement. The objective of this paper is to discuss some of the management techniques, which are purported to support various process performance concerns and perspectives, and present the major factors that remain unsupported in identifying, measuring and understanding design process performance
Three-dimensional coating and rimming flow: a ring of fluid on a rotating horizontal cylinder
The steady three-dimensional flow of a thin, slowly varying ring of Newtonian fluid on either the outside or the inside of a uniformly rotating large horizontal cylinder is investigated. Specifically, we study “full-ring” solutions, corresponding to a ring of continuous, finite and non-zero thickness that extends all the way around the cylinder. In particular, it is found that there is a critical solution corresponding to either a critical load above which no full-ring solution exists (if the rotation speed is prescribed) or a critical rotation speed below which no full-ring solution exists (if the load is prescribed). We describe the behaviour of the critical solution and, in particular, show that the critical flux, the critical load, the critical semi-width and the critical ring profile are all increasing functions of the rotation speed. In the limit of small rotation speed, the critical flux is small and the critical ring is narrow and thin, leading to a small critical load. In the limit of large rotation speed, the critical flux is large and the critical ring is wide on the upper half of the cylinder and thick on the lower half of the cylinder, leading to a large critical load.\ud
\ud
We also describe the behaviour of the non-critical full-ring solution, and, in particular, show that the semi-width and the ring profile are increasing functions of the load but, in general, non-monotonic functions of the rotation speed. In the limit of large rotation speed, the ring approaches a limiting non-uniform shape, whereas in the limit of small load, the ring is narrow and thin with a uniform parabolic profile. Finally, we show that, while for most values of the rotation speed and the load the azimuthal velocity is in the same direction as the rotation of the cylinder, there is a region of parameter space close to the critical solution for sufficiently small rotation speed in which backflow occurs in a small region on the right-hand side of the cylinder
Thermoviscous Coating and Rimming Flow
A comprehensive description is obtained of steady thermoviscous (i.e. with temperature-dependent viscosity) coating and rimming flow on a uniformly rotating horizontal cylinder that is uniformly hotter or colder than the surrounding atmosphere. It is found that, as in the corresponding isothermal problem, there is a critical solution with a corresponding critical load (which depends, in general, on both the Biot number and the thermoviscosity number) above which no ``full-film'' solutions corresponding to a continuous film of fluid covering the entire outside or inside of the cylinder exist. The effect of thermoviscosity on both the critical solution and the full-film solution with a prescribed load is described. In particular, there are no full-film solutions with a prescribed load M for any value of the Biot number when M is greater than or equal to M_{c0} divided by the square root of f for positive thermoviscosity number and when M is greater than M_{c0} for negative thermoviscosity number, where f is a monotonically decreasing function of the thermoviscosity number and M_{c0} = 4.44272 is the critical load in the constant-viscosity case. It is also found that when the prescribed load M is less than 1.50315 there is a narrow region of the Biot number - thermoviscosity number parameter plane in which backflow occurs
- …