553 research outputs found
Enabling Self-Powered Autonomous Wireless Sensors with New-Generation I2C-RFID Chips
A self-powered autonomous RFID device with sensing and computing capabilities
is presented in this paper. Powered by an RF energy-harvesting circuit enhanced
by a DC-DC voltage booster in silicon-on-insulator (SOI) technology, the device
relies on a microcontroller and a new generation I2C-RFID chip to wirelessly
deliver sensor data to standard RFID EPC Class-1 Generation-2 (Gen2) readers.
When the RF power received from the interrogating reader is -14 dBm or higher,
the device, fabricated on an FR4 substrate using low-cost discrete components,
is able to produce 2.4-V DC voltage to power its circuitry. The experimental
results demonstrate the effectiveness of the device to perform reliable sensor
data transmissions up to 5 meters in fully-passive mode. To the best of our
knowledge, this represents the longest read range ever reported for passive UHF
RFID sensors compliant with the EPC Gen2 standard
04/15/1985 - Weekly Preview Review
Conventional RFID readers combine transmission (to the tag) and reception (from the tag) functions in a single physical device. In this paper we discuss the design and potential applications of a receive-only device, called "RFID listener", that decodes the signals from both the tag and the reader. This enables augmented RFID systems where one transmitter coexists with multiple listeners offering reception redundancy and diversity. We present a Software-Defined Radio (SDR) implementation of an RFID listener compliant with Gen2 standard, which can serve as a research tool for experimenting "on air" novel augmented RFID systems. Moreover, our listener can be used as a flexible and cheap protocol analyzer for conventional reader/tag systems. We present a test-bed setting where our listener and a conventional SDR reader are used in conjunction to measure separately the maximum downlink and uplink range. © 2011 IEEE
Pulsed Ultrasound-Assisted Extraction as an Alternative Method to Conventional Maceration for the Extraction of the Polyphenolic Fraction of Ribes nigrum Buds: A new category of food supplements proposed by the Finnover project
The water safety plan approach: Application to small drinking-water systems—case studies in salento (south italy)
none6noBackground: The quality of water for human consumption is an objective of fundamental importance for the defense of public health. Since the management of networks involves many problems of control and efficiency of distribution, the Water Safety Plan (WSP) was introduced to address these growing problems. Methods: WSP was applied to three companies in which the water resource assumes central importance: five water kiosks, a third-range vegetable processing company, and a residence and care institution. In drafting the plan, the terms and procedures designed and tested for the management of urban distribution systems were applied to safeguard the resource over time. Results: The case studies demonstrated the reliability of the application of the model even to small drinking-water systems, even though it involved a greater effort in analyzing the incoming water, the local intended use, and the possibilities for managing the containment of the dangers to which it is exposed. This approach demonstrates concrete effectiveness in identifying and mitigating the dangers of altering the quality of water. Conclusions: Thanks to the WSP applied to small drinking-water systems, we can move from management that is focused mainly on verifying the conformity of the finished product to the creation of a global risk assessment and management system that covers the entire water supply chain.openSerio F.; Martella L.; Imbriani G.; Idolo A.; Bagordo F.; De Donno A.Serio, F.; Martella, L.; Imbriani, G.; Idolo, A.; Bagordo, F.; De Donno, A
Occurrence and associative value of non-identifiable fingermarks
Fingermarks that have insufficient characteristics for identification often have discernible characteristics that could form the basis for lesser degrees of correspondence or probability of occurrence within a population. Currently, those latent prints that experts judge to be insufficient for identification are not used as associative evidence. How often do such prints occur and what is their potential value for association? The answers are important. We could be routinely setting aside a very important source of associative evidence, with high potential impact, in many cases; or such prints might be of very low utility, adding very little, or only very rarely contributing to cases in a meaningful way. The first step is to better understand the occurrence and range of associative value of these fingermarks.
The project goal was to explore and test a theory that in large numbers of cases fingermarks of no value for identification purposes occur and are readily available, though not used, and yet have associative value that could provide useful information.
Latent fingermarks were collected from nine state and local jurisdictions. Fingermarks included were those (1) collected in the course of investigations using existing jurisdictional procedures, (2) originally assessed by the laboratory as of no value for identification (NVID), (3) re-assessed by expert review as NVID, but with least three clear and reliable minutiae in relationship to one another, and (4) determined to show at least three auto-encoded minutiae.
An expected associative value (ESLR) for each mark was measured, without reference to a putative source, based on modeling within-variability and between-variability of AFIS scores. This method incorporated (1) latest generation feature extraction, (2) a (minutiae-only) matcher, (3) a validated distortion model, and (4) NIST SD27 database calibration. Observed associative value distributions were determined for violent crimes, property crimes, and for existing objective measurements of latent print quality.
750 Non Identifiable Fingermarks (NIFMs) showed values of Log10 ESLR ranging from 1.05 to 10.88, with a mean value of 5.56 (s.d. 2.29), corresponding to an ESLR of approximately 380,000.
It is clear that there are large numbers of cases where NIFMs occur that have high potential associative value as indicated by the ESLR. These NIFMs are readily available, but not used, yet have associative value that could provide useful information. These findings lead to the follow-on questions, “How useful would NIFM evidence be in actual practice?” and, “What developments or improvements are needed to maximize this contribution?
Assessing environmental impacts of nursery production: methodological issues and results from a case study in Italy
ATLAS and CMS applications on the WorldGrid testbed
WorldGrid is an intercontinental testbed spanning Europe and the US
integrating architecturally different Grid implementations based on the Globus
toolkit. It has been developed in the context of the DataTAG and iVDGL
projects, and successfully demonstrated during the WorldGrid demos at IST2002
(Copenhagen) and SC2002 (Baltimore). Two HEP experiments, ATLAS and CMS,
successful exploited the WorldGrid testbed for executing jobs simulating the
response of their detectors to physics eve nts produced by real collisions
expected at the LHC accelerator starting from 2007. This data intensive
activity has been run since many years on local dedicated computing farms
consisting of hundreds of nodes and Terabytes of disk and tape storage. Within
the WorldGrid testbed, for the first time HEP simulation jobs were submitted
and run indifferently on US and European resources, despite of their underlying
different Grid implementations, and produced data which could be retrieved and
further analysed on the submitting machine, or simply stored on the remote
resources and registered on a Replica Catalogue which made them available to
the Grid for further processing. In this contribution we describe the job
submission from Europe for both ATLAS and CMS applications, performed through
the GENIUS portal operating on top of an EDG User Interface submitting to an
EDG Resource Broker, pointing out the chosen interoperability solutions which
made US and European resources equivalent from the applications point of view,
the data management in the WorldGrid environment, and the CMS specific
production tools which were interfaced to the GENIUS portal.Comment: Poster paper from the 2003 Computing in High Energy and Nuclear
Physics (CHEP03), La Jolla, Ca, USA, March 2003, 10 pages, PDF. PSN TUCP004;
added credit to funding agenc
- …