Tinjauan Performansi Bubut Doll LT13 terhadap Penyimpangan Kebulatan Benda Kerja

The industry manufacture with high quality and able to pruduce the workpicece with high quality In industry manufacture are very necessary. The use of high quality machines should be supported by the ability to operate and the ability to perform maintenance, this ability is useful to maintain the condition of the machine in order to produce good quality workpieces. Politeknik Manufaktur Negeri Bangka Belitung has several high quality machine tools, one type of machine tools usually use is lathe machine doall LT13 with total have six units. this machine Used to support education and to produce spare parts. Doall LT13 lathes have been used for 22 years, during that period there may be deviation of machine geometry, deviations that occur can lead to decreased quality of the resulting workpiece. This study aims to determine the feasibility of the machine by measuring the roundness of the spicemen of the process of turning, the roundness of the specimen is analyzed by using the minimum circle method. From the roundness testing performed on the doall lt 13 the result� that can be achieved as follows 0,082 mm at lathe number 8, 0,073 mm at lathe number 5, 0,057 mm at lathe number 7, 0,051 mm at lathe� number 2, 0,048 mm at lathe number 6 and 0,046 mm at lathe number 3

Penggunaan Metode Particle Swarm Optimization (PSO) pada Optimasi Multirespon Gaya Tekan dan Momen Torsi Penggurdian Material Komposit Glass Fiber Reinforce Polymer (GFRP) yang Ditumpuk dengan Material Stainless Steel (SS)

The Particle Swarm Optimization (PSO) method is one of the methods used for multirespon optimization in the manufacturing process. In this research, the material used is Glass fiber reinforced polymer (GFRP) composite material which is stacked with stainless steel material. The machining process used is a drilling process conducted on a vertical CNC machine Brother TC-22A-O. The thrust force and torque is the response used to evaluate the performance of the drilling process. The quality characteristics of this response "the smaller the better". The aim of this study was to identify the combination of process parameters to achieve the performance characteristics required in drilling process the GFRP-SS material using Particle Swarm Optimization methode (PSO). The three process parameters i.e. point angle, spindle speed, and feeding speed is used as a process parameter. Point angle was set at two different levels, while the other two were set at three different levels. Therefore, the 2 x 3 x 3 factorial is used as the experimental design. The experiments were replicated two times. The minimum thrust force and torque could be obtained by using point angle, spindle speed, and feeding speed are 118o, 2330 rpm, and 65 mm/minrespectively