1,564 research outputs found
Electronic states in heterostructures with piece-wise uniform Dirac cones
Version of RecordPublishe
Comment on “Intrinsic dielectric frequency dependent spectrum of a single domain tetragonal BaTiO3” [J. Appl. Phys. 112, 014108 (2012)]
Version of RecordPublishe
Modulation of human cardiac transient outward potassium current by EGFR tyrosine kinase and Src-family kinases
Aims: The human cardiac transient outward K + current Ito (encoded by Kv4.3 or KCND3) plays an important role in phase 1 rapid repolarization of cardiac action potentials in the heart. However, modulation of I to by intracellular signal transduction is not fully understood. The present study was therefore designed to determine whether/how human atrial I to and hKv4.3 channels stably expressed in HEK 293 cells are regulated by protein tyrosine kinases (PTKs). Methods and results: Whole-cell patch voltage-clamp, immunoprecipitation, western blotting, and site-directed mutagenesis approaches were employed in the present study. We found that human atrial I to was inhibited by the broad-spectrum PTK inhibitor genistein, the selective epidermal growth factor receptor (EGFR) kinase inhibitor AG556, and the Src-family kinases inhibitor PP2. The inhibitory effect was countered by the protein tyrosine phosphatase inhibitor orthovanadate. In HEK 293 cells stably expressing human KCND3, genistein, AG556, and PP2 significantly reduced the hKv4.3 current, and the reduction was antagonized by orthovanadate. Interestingly, orthovanadate also reversed the reduced tyrosine phosphorylation level of hKv4.3 channels by genistein, AG556, or PP2. Mutagenesis revealed that the hKv4.3 mutant Y136F lost the inhibitory response to AG556, while Y108F lost response to PP2. The double-mutant Y108FY136F hKv4.3 channels showed no response to either AG556 or PP2. Conclusion: Our results demonstrate that human atrial Ito and cloned hKv4.3 channels are modulated by EGFR kinase via phosphorylation of the Y136 residue and by Src-family kinases via phosphorylation of the Y108 residue; tyrosine phosphorylation of the channel may be involved in regulating cardiac electrophysiology. © The Author 2011.postprin
Microstructure and properties of a deformation-processed Cu-Cr-Ag in situ composite by directional solidification
Cu-7Cr-0.07Ag alloys were prepared by casting and directional solidification, from which deformation-processed in situ composites were prepared by thermo-mechanical processing. The microstructure, mechanical properties, and electrical properties were investigated using optical microscopy, scanning electronic microscopy, tensile testing, and a micro-ohmmeter. The second-phase Cr grains of the directional solidification Cu-7Cr-0.07Ag in situ composite were parallel to the drawing direction and were finer, which led to a higher tensile strength and a better combination of properties
Evolution, opportunity and challenges of transboundary water and energy problems in Central Asia
Establishment of a normal medakafish spermatogonial cell line capable of sperm production in vitro
Spermatogonia are the male germ stem cells that continuously produce sperm for the next generation. Spermatogenesis is a complicated process that proceeds through mitotic phase of stem cell renewal and differentiation, meiotic phase, and postmeiotic phase of spermiogenesis. Full recapitulation of spermatogenesis in vitro has been impossible, as generation of normal spermatogonial stem cell lines without immortalization and production of motile sperm from these cells after long-term culture have not been achieved. Here we report the derivation of a normal spermatogonial cell line from a mature medakafish testis without immortalization. After 140 passages during 2 years of culture, this cell line retains stable but growth factor-dependent proliferation, a diploid karyotype, and the phenotype and gene expression pattern of spermatogonial stem cells. Furthermore, we show that this cell line can undergo meiosis and spermiogenesis to generate motile sperm. Therefore, the ability of continuous proliferation and sperm production in culture is an intrinsic property of medaka spermatogonial stem cells, and immortalization apparently is not necessary to derive male germ cell cultures. Our findings and cell line will offer a unique opportunity to study and recapitulate spermatogenesis in vitro and to develop approaches for germ-line transmission.Spermatogonia are the male germ stem cells that continuously produce sperm for the next generation. Spermatogenesis is a complicated process that proceeds through mitotic phase of stem cell renewal and differentiation, meiotic phase, and postmeiotic phase of spermiogenesis. Full recapitulation of spermatogenesis in vitro has been impossible, as generation of normal spermatogonial stem cell lines without immortalization and production of motile sperm from these cells after long-term culture have not been achieved. Here we report the derivation of a normal spermatogonial cell line from a mature medakafish testis without immortalization. After 140 passages during 2 years of culture, this cell line retains stable but growth factor-dependent proliferation, a diploid karyotype, and the phenotype and gene expression pattern of spermatogonial stem cells. Furthermore, we show that this cell line can undergo meiosis and spermiogenesis to generate motile sperm. Therefore, the ability of continuous proliferation and sperm production in culture is an intrinsic property of medaka spermatogonial stem cells, and immortalization apparently is not necessary to derive male germ cell cultures. Our findings and cell line will offer a unique opportunity to study and recapitulate spermatogenesis in vitro and to develop approaches for germ-line transmission
An IoT-Enabled Stroke Rehabilitation System Based on Smart Wearable Armband and Machine Learning
Surface electromyography signal plays an important role in hand function recovery training. In this paper, an IoT-enabled stroke rehabilitation system was introduced which was based on a smart wearable armband (SWA), machine learning (ML) algorithms, and a 3-D printed dexterous robot hand. User comfort is one of the key issues which should be addressed for wearable devices. The SWA was developed by integrating a low-power and tiny-sized IoT sensing device with textile electrodes, which can measure, pre-process, and wirelessly transmit bio-potential signals. By evenly distributing surface electrodes over user's forearm, drawbacks of classification accuracy poor performance can be mitigated. A new method was put forward to find the optimal feature set. ML algorithms were leveraged to analyze and discriminate features of different hand movements, and their performances were appraised by classification complexity estimating algorithms and principal components analysis. According to the verification results, all nine gestures can be successfully identified with an average accuracy up to 96.20%. In addition, a 3-D printed five-finger robot hand was implemented for hand rehabilitation training purpose. Correspondingly, user's hand movement intentions were extracted and converted into a series of commands which were used to drive motors assembled inside the dexterous robot hand. As a result, the dexterous robot hand can mimic the user's gesture in a real-time manner, which shows the proposed system can be used as a training tool to facilitate rehabilitation process for the patients after stroke
Characterization and phylogenetic analysis of the chitinase gene from the Helicoverpa armigera single nucleocapsid nucleopolyhedrovirus
A putative chitinase gene was identified within the fragment EcoRI-K of the Helicoverpa armigera single-nucleocapsid nucleopolyhedrovirus (HearNPV, also called HaSNPIV) genome. The open reading frame (ORF) contains 1713 nucleotides (nt) and encodes a protein of 570 amino acids (aa) with a predicted molecular weight of 63.6 kDa. Transcription started at about 18 h post infection (p.i.) and the protein was first detected at 20 h p.i. The times of transcription and expression are characteristic of a late baculovirus gene. 5' and 3' RACE indicated that transcription was initiated from the adenine residue located at -246 nt upstream from the ATG start site and the poly (A) tail was added at 267 nt downstream from the stop codon. This is the first report on the molecular characterization of a chitinase from a single nucleocapsid NPV. The phylogeny of baculoviral chitinase genes were extensively examined in comparison with chitinases derived from bacteria, fungi, nematode, actinomycetes, viruses, insects and mammals. Neighbor-joining and most parsimony analyses showed that the baculoviral chitinases were clustered exclusively within gamma-proteobacteria. Our results strongly suggest that baculoviruses acquired their chitinase genes from bacteria. (C) 2004 Elsevier B.V. All rights reserved.A putative chitinase gene was identified within the fragment EcoRI-K of the Helicoverpa armigera single-nucleocapsid nucleopolyhedrovirus (HearNPV, also called HaSNPIV) genome. The open reading frame (ORF) contains 1713 nucleotides (nt) and encodes a protein of 570 amino acids (aa) with a predicted molecular weight of 63.6 kDa. Transcription started at about 18 h post infection (p.i.) and the protein was first detected at 20 h p.i. The times of transcription and expression are characteristic of a late baculovirus gene. 5' and 3' RACE indicated that transcription was initiated from the adenine residue located at -246 nt upstream from the ATG start site and the poly (A) tail was added at 267 nt downstream from the stop codon. This is the first report on the molecular characterization of a chitinase from a single nucleocapsid NPV. The phylogeny of baculoviral chitinase genes were extensively examined in comparison with chitinases derived from bacteria, fungi, nematode, actinomycetes, viruses, insects and mammals. Neighbor-joining and most parsimony analyses showed that the baculoviral chitinases were clustered exclusively within gamma-proteobacteria. Our results strongly suggest that baculoviruses acquired their chitinase genes from bacteria. (C) 2004 Elsevier B.V. All rights reserved
SiC Nanorods Grown on Electrospun Nanofibers Using Tb as Catalyst: Fabrication, Characterization, and Photoluminescence Properties
Well-crystallizedβ-SiC nanorods grown on electrospun nanofibers were synthesized by carbothermal reduction of Tb doped SiO2(SiO2:Tb) nanofibers at 1,250 °C. The as-synthesized SiC nanorods were 100–300 nm in diameter and 2–3 μm in length. Scanning electron microscopy (SEM) results suggested that the growth of the SiC nanorods should be governed by vapor-liquid-solid (VLS) mechanism with Tb metal as catalyst. Tb(NO3)3particles on the surface of the electrospun nanofibers were decomposed at 500 °C and later reduced to the formation of Tb nanoclusters at 1,200 °C, and finally the formation of a Si–C–Tb ally droplet will stimulate the VLS growth at 1,250 °C. Microstructure of the nanorod was further investigated by transmission electron microscopy (TEM). It was found that SiC <111> is the preferred initial growth direction. The liquid droplet was identified to be Si86Tb14, which acted as effective catalyst. Strong green emissions were observed from the SiC nanorod samples. Four characteristic photoluminescence (PL) peaks of Tb ions were also identified
Structural insight into SUMO chain recognition and manipulation by the ubiquitin ligase RNF4
The small ubiquitin-like modifier (SUMO) can form polymeric chains that are important signals in cellular processes such as meiosis, genome maintenance and stress response. The SUMO-targeted ubiquitin ligase RNF4 engages with SUMO chains on linked substrates and catalyses their ubiquitination, which targets substrates for proteasomal degradation. Here we use a segmental labelling approach combined with solution nuclear magnetic resonance (NMR) spectroscopy and biochemical characterization to reveal how RNF4 manipulates the conformation of the SUMO chain, thereby facilitating optimal delivery of the distal SUMO domain for ubiquitin transfer
- …