2,370 research outputs found
Multi-core job submission and grid resource scheduling for ATLAS AthenaMP
AthenaMP is the multi-core implementation of the ATLAS software framework and allows the efficient sharing of memory pages between multiple threads of execution. This has now been validated for production and delivers a significant reduction on the overall application memory footprint with negligible CPU overhead. Before AthenaMP can be routinely run on the LHC Computing Grid it must be determined how the computing resources available to ATLAS can best exploit the notable improvements delivered by switching to this multi-process model. A study into the effectiveness and scalability of AthenaMP in a production environment will be presented. Best practices for configuring the main LRMS implementations currently used by grid sites will be identified in the context of multi-core scheduling optimisation
Thermodynamic metrics and optimal paths
A fundamental problem in modern thermodynamics is how a molecular-scale
machine performs useful work, while operating away from thermal equilibrium
without excessive dissipation. To this end, we derive a friction tensor that
induces a Riemannian manifold on the space of thermodynamic states. Within the
linear-response regime, this metric structure controls the dissipation of
finite-time transformations, and bestows optimal protocols with many useful
properties. We discuss the connection to the existing thermodynamic length
formalism, and demonstrate the utility of this metric by solving for optimal
control parameter protocols in a simple nonequilibrium model.Comment: 5 page
Measurements of a low temperature mechanical dissipation peak in a single layer of Ta2O5 doped with TiO2
Thermal noise arising from mechanical dissipation in oxide coatings is a
major limitation to many precision measurement systems, including optical
frequency standards, high resolution optical spectroscopy and interferometric
gravity wave detectors. Presented here are measurements of dissipation as a
function of temperature between 7 K and 290 K in ion-beam sputtered Ta2O5 doped
with TiO2, showing a loss peak at 20 K. Analysis of the peak provides the first
evidence of the source of dissipation in doped Ta2O5 coatings, leading to
possibilities for the reduction of thermal noise effects
Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings
We report on thermal noise from the internal friction of dielectric coatings
made from alternating layers of Ta2O5 and SiO2 deposited on fused silica
substrates. We present calculations of the thermal noise in gravitational wave
interferometers due to optical coatings, when the material properties of the
coating are different from those of the substrate and the mechanical loss angle
in the coating is anisotropic. The loss angle in the coatings for strains
parallel to the substrate surface was determined from ringdown experiments. We
measured the mechanical quality factor of three fused silica samples with
coatings deposited on them. The loss angle of the coating material for strains
parallel to the coated surface was found to be (4.2 +- 0.3)*10^(-4) for
coatings deposited on commercially polished slides and (1.0 +- 0.3)*10^{-4} for
a coating deposited on a superpolished disk. Using these numbers, we estimate
the effect of coatings on thermal noise in the initial LIGO and advanced LIGO
interferometers. We also find that the corresponding prediction for thermal
noise in the 40 m LIGO prototype at Caltech is consistent with the noise data.
These results are complemented by results for a different type of coating,
presented in a companion paper.Comment: Submitted to LSC (internal) review Sept. 20, 2001. To be submitted to
Phys. Lett.
Apparatus for dimensional characterization of fused silica fibers for the suspensions of advanced gravitational wave detectors
Detection of gravitational waves from astrophysical sources remains one of the most challenging problems faced by experimental physicists. A significant limit to the sensitivity of future long-baseline interferometric gravitational wave detectors is thermal displacement noise of the test mass mirrors and their suspensions. Suspension thermal noise results from mechanical dissipation in the fused silica suspension fibers suspending the test mass mirrors and is therefore an important noise source at operating frequencies between ∼10 and 30 Hz. This dissipation occurs due to a combination of thermoelastic damping, surface and bulk losses. Its effects can be reduced by optimizing the thermoelastic and surface loss, and these parameters are a function of the cross sectional dimensions of the fiber along its length. This paper presents a new apparatus capable of high resolution measurements of the cross sectional dimensions of suspension fibers of both rectangular and circular cross section, suitable for use in advanced detector mirror suspensions
Invited Article: CO_2 laser production of fused silica fibers for use in interferometric gravitational wave detector mirror suspensions
In 2000 the first mirror suspensions to use a quasi-monolithic final stage were installed at the GEO600 detector site outside Hannover, pioneering the use of fused silica suspension fibers in long baseline interferometric detectors to reduce suspension thermal noise. Since that time, development of the production methods of fused silica fibers has continued. We present here a review of a novel CO_2 laser-based fiber pulling machine developed for the production of fused silica suspensions for the next generation of interferometric gravitational wave detectors and for use in experiments requiring low thermal noise suspensions. We discuss tolerances, strengths, and thermal noise performance requirements for the next generation of gravitational wave detectors. Measurements made on fibers produced using this machine show a 0.8% variation in vertical stiffness and 0.05% tolerance on length, with average strengths exceeding 4 GPa, and mechanical dissipation which meets the requirements for Advanced LIGO thermal noise performance
Thermoelastic dissipation in inhomogeneous media: loss measurements and displacement noise in coated test masses for interferometric gravitational wave detectors
The displacement noise in the test mass mirrors of interferometric
gravitational wave detectors is proportional to their elastic dissipation at
the observation frequencies. In this paper, we analyze one fundamental source
of dissipation in thin coatings, thermoelastic damping associated with the
dissimilar thermal and elastic properties of the film and the substrate. We
obtain expressions for the thermoelastic dissipation factor necessary to
interpret resonant loss measurements, and for the spectral density of
displacement noise imposed on a Gaussian beam reflected from the face of a
coated mass. The predicted size of these effects is large enough to affect the
interpretation of loss measurements, and to influence design choices in
advanced gravitational wave detectors.Comment: 42 pages, 7 figures, uses REVTeX
An investigation of site-similarity approaches to generalisation of a rainfall–runoff model
This paper investigates a new approach to spatial generalisation of rainfall–runoff model parameters – site-similarity with pooling groups – for use in flood frequency estimation at ungauged sites using continuous simulation. The method is developed for the generalisation of a simple conceptual model, the Probability Distributed Model, with four parameters which require specific estimation. The study is based on a relatively large sample of catchments in Great Britain. Various options are investigated within the approach. In the final version, the pooling group comprises the 10 calibrated catchments closest, in catchment property space, to the target site, where the catchment properties used to define the space differ for each parameter of the model. An analysis that, explicitly, takes account of calibration uncertainty as a source of error enables the uncertainty associated with generalised parameter values to be reduced, justifiably. The approach uses calibration uncertainty estimated through jack-knifing and employs a weighting scheme within pooling groups that uses weights which vary both with distance in the catchment property space and with the calibration uncertainty. Models using generalised values from this approach perform relatively well compared with direct calibration. Although performance appears to be better in some areas of the country than others, there are no obvious relationships between catchment properties and performance
- …