Blood-brain barrier: a real obstacle for therapeutics Response - authors response

Author Response published in conjunction with Letter to the Editor. Response only appears when viewing 'Full text' or 'PDF'Dusan Losi

On leading order gravitational backreactions in de Sitter spacetime

Backreactions are considered in a de Sitter spacetime whose cosmological constant is generated by the potential of scalar field. The leading order gravitational effect of nonlinear matter fluctuations is analyzed and it is found that the initial value problem for the perturbed Einstein equations possesses linearization instabilities. We show that these linearization instabilities can be avoided by assuming strict de Sitter invariance of the quantum states of the linearized fluctuations. We furthermore show that quantum anomalies do not block the invariance requirement. This invariance constraint applies to the entire spectrum of states, from the vacuum to the excited states (should they exist), and is in that sense much stronger than the usual Poincare invariance requirement of the Minkowski vacuum alone. Thus to leading order in their effect on the gravitational field, the quantum states of the matter and metric fluctuations must be de Sitter invariant.Comment: 12 pages, no figures, typos corrected and some clarifying comments added, version accepted by Phys. Rev.

Assessment of binding affinity between drugs and human serum albumin using nanoporous anodic alumina photonic crystals

In this study, we report an innovative approach aiming to assess the binding affinity between drug molecules and human serum albumin by combining nanoporous anodic alumina rugate filters (NAA-RFs) modified with human serum albumin (HSA) and reflectometric interference spectroscopy (RIfS). NAA-RFs are photonic crystal structures produced by sinusoidal pulse anodization of aluminum that present two characteristic optical parameters, the characteristic reflection peak (λPeak), and the effective optical thickness of the film (OTeff), which can be readily used as sensing parameters. A design of experiments strategy and an ANOVA analysis are used to establish the effect of the anodization parameters (i.e., anodization period and anodization offset) on the sensitivity of HSA-modified NAA-RFs toward indomethacin, a model drug. To this end, two sensing parameters are used, that is, shifts in the characteristic reflection peak (ΔλPeak) and changes in the effective optical thickness of the film (ΔOTeff). Subsequently, optimized NAA-RFs are used as sensing platforms to determine the binding affinity between a set of drugs (i.e., indomethacin, coumarin, sulfadymethoxine, warfarin, and salicylic acid) and HSA molecules. Our results verify that the combination of HSA-modified NAA-RFs with RIfS can be used as a portable, low-cost, and simple system for establishing the binding affinity between drugs and plasma proteins, which is a critical factor to develop efficient medicines for treating a broad range of diseases and medical conditions.Mahdieh Nemati, Abel Santos, Cheryl Suwen Law, and Dusan Losi

Rational engineering of nanoporous anodic alumina optical bandpass filters

First published online 07 Jul 2016Herein, we present a rationally designed advanced nanofabrication approach aiming at producing a new type of optical bandpass filters based on nanoporous anodic alumina photonic crystals. The photonic stop band of nanoporous anodic alumina (NAA) is engineered in depth by means of a pseudo-stepwise pulse anodisation (PSPA) approach consisting of pseudo-stepwise asymmetric current density pulses. This nanofabrication method makes it possible to tune the transmission bands of NAA at specific wavelengths and bandwidths, which can be broadly modified across the UV-visible-NIR spectrum through the anodisation period (i.e. time between consecutive pulses). First, we establish the effect of the anodisation period as a means of tuning the position and width of the transmission bands of NAA across the UV-visible-NIR spectrum. To this end, a set of nanoporous anodic alumina bandpass filters (NAA-BPFs) are produced with different anodisation periods, ranging from 500 to 1200 s, and their optical properties (i.e. characteristic transmission bands and interferometric colours) are systematically assessed. Then, we demonstrate that the rational combination of stacked NAA-BPFs consisting of layers of NAA produced with different PSPA periods can be readily used to create a set of unique and highly selective optical bandpass filters with characteristic transmission bands, the position, width and number of which can be precisely engineered by this rational anodisation approach. Finally, as a proof-of-concept, we demonstrate that the superposition of stacked NAA-BPFs produced with slight modifications of the anodisation period enables the fabrication of NAA-BPFs with unprecedented broad transmission bands across the UV-visible-NIR spectrum. The results obtained from our study constitute the first comprehensive rationale towards advanced NAA-BPFs with fully controllable photonic properties. These photonic crystal structures could become a promising alternative to traditional optical bandpass filters based on glass and plastic.Abel Santos, Taj Pereira, Cheryl Suwen Law and Dusan Losi

Water soluble fluorescent carbon nanodots from biosource for cells imaging

Carbon nanodots (CNDs) derived from a green precursor, kidney beans, was synthesized with high yield via a facile pyrolysis technique. The CND material was easily modified through simple oxidative treatment with nitric acid, leading to a high density “self-passivated” water soluble form (wsCNDs). The synthesized wsCNDs have been extensively characterized by using various microscopic and spectroscopic techniques and were crystalline in nature. The highly carboxylated wsCNDs possessed tunable-photoluminescence emission behavior throughout the visible region of the spectrum, demonstrating their application for multicolor cellular imaging of HeLa cells. The tunable-photoluminescence properties of “self-passivated” wsCNDs make them a promising candidate as a probe in biological cell-imaging applications.Kumud Malika Tripathi, Tuan Sang Tran, Tran Thanh Tung, Dusan Losic and TaeYoung Ki

Light propagation in nanorod arrays

We study propagation of TM- and TE-polarized light in two-dimensional arrays of silver nanorods of various diameters in a gelatin background. We calculate the transmittance, reflectance and absorption of arranged and disordered nanorod arrays and compare the exact numerical results with the predictions of the Maxwell-Garnett effective-medium theory. We show that interactions between nanorods, multipole contributions and formations of photonic gaps affect strongly the transmittance spectra that cannot be accounted for in terms of the conventional effective-medium theory. We also demonstrate and explain the degradation of the transmittance in arrays with randomly located rods as well as weak influence of their fluctuating diameter. For TM modes we outline the importance of skin-effect, which causes the full reflection of the incoming light. We then illustrate the possibility of using periodic arrays of nanorods as high-quality polarizers.Comment: 6 pages, 7 figure

Controlling interferometric properties of nanoporous anodic aluminium oxide

A study of reflective interference spectroscopy [RIfS] properties of nanoporous anodic aluminium oxide [AAO] with the aim to develop a reliable substrate for label-free optical biosensing is presented. The influence of structural parameters of AAO including pore diameters, inter-pore distance, pore length, and surface modification by deposition of Au, Ag, Cr, Pt, Ni, and TiO2 on the RIfS signal (Fabry-Perot fringe) was explored. AAO with controlled pore dimensions was prepared by electrochemical anodization of aluminium using 0.3 M oxalic acid at different voltages (30 to 70 V) and anodization times (10 to 60 min). Results show the strong influence of pore structures and surface modifications on the interference signal and indicate the importance of optimisation of AAO pore structures for RIfS sensing. The pore length/pore diameter aspect ratio of AAO was identified as a suitable parameter to tune interferometric properties of AAO. Finally, the application of AAO with optimised pore structures for sensing of a surface binding reaction of alkanethiols (mercaptoundecanoic acid) on gold surface is demonstrated

On the initial value problem for second order scalar fluctuations in Einstein static

We consider fluctuations in a perfect irrotational fluid coupled to gravity in an Einstein static universe background. We show that the homogeneous linear perturbations of the scalar and metric fluctuations in the Einstein static universe must be present if the second order constraint equations are to be integrable. I.e., the 'linearization stability' constraint forces the presence of these homogeneous modes. Since these linear homogeneous scalar modes are well known to be exponentially unstable, the tactic of neglecting these modes to create a long-lived, almost Einstein universe does not work, even if all higher order (L $>$ 1) modes are dynamically stable.Comment: 8 pages, no figures, changes made to the presentation throughout to emphasize the linear nature of the analysis and the treatment of the irrotational perfect fluid. Conclusions unchanged. Submitted to PR

A unique 3D nitrogen-doped carbon composite as high-performance oxygen reduction catalyst

The synthesis and properties of an oxygen reduction catalyst based on a unique 3-dimensional (3D) nitrogen doped (N-doped) carbon composite are described. The composite material is synthesised via a two-step hydrothermal and pyrolysis method using bio-source low-cost materials of galactose and melamine. Firstly, the use of iron salts and galactose to hydrothermally produceiron oxide (Fe₂O₃) magnetic nanoparticle clusters embedded carbon spheres. Secondly, magnetic nanoparticles diffused out of the carbon sphere when pyrolysed in the presence of melamine as nitrogen precursor. Interestingly, many of these nanoparticles, as catalyst-grown carbon nanotubes (CNTs), resulted in the formation of N-doped CNTs and N-doped carbon spheres under the decomposition of carbon and a nitrogen environment. The composite material consists of integrated N-doped carbon microspheres and CNTs show high ORR activity through a predominantly four-electron pathway.Ramesh Karunagaran, Tran Thanh Tung, Cameron Shearer, Diana Tran, Campbell Coghlan, Christian Doonan, and Dusan Losi

Iron oxide nanowires from bacteria biofilm as an edfficient visible-light magnetic photocatalyst

Published: July 15, 2016Naturally produced iron oxide nanowires by Mariprofundus ferrooxydans bacteria as biofilm are evaluated for their structural, chemical, and photocatalytic performance under visible-light irradiation. The crystal phase structure of this unique natural material presents a 1-dimensional (1D) nanowire-like geometry, which is transformed from amorphous to crystalline (hematite) by thermal annealing at high temperature without changing their morphology. This study systematically assesses the effect of different annealing temperatures on the photocatalytic activity of iron oxide nanowires produced by Mariprofundus ferrooxydans bacteria. The nanowires processed at 800 °C were the most optimal for photocatalytic applications degrading a model dye (rhodamine B) in less than an hour. These nanowires displayed excellent reusability with no significant loss of activity even after 6 cycles. Kinetic studies by using hydrogen peroxide (radical generator) and isopropyl alcohol (radical scavenger) suggest that OH• is the dominant photooxidant. These nanowires are naturally produced, inexpensive, highly active, stable, and magnetic and have the potential to be used for broad applications including environmental remediation, water disinfection, and industrial catalysis.Luoshan Wang, Tushar Kumeria, Abel Santos, Peter Forward, Martin F. Lambert, and Dusan Losi