1,276 research outputs found
The frequency-dependent directivity of a planar Fabry-Perot polymer film ultrasound sensor
A model of the frequency-dependent directivity of a planar, optically-addressed, Fabry-Perot (FP), polymer film ultrasound sensor is described and validated against experimental directivity measurements made over a frequency range of 1 to 15 MHz and angles from normal incidence to 80 degrees. The model may be used, for example, as a predictive tool to improve sensor design, or to provide a noise-free response function that could be deconvolved from sound-field measurements in order to improve accuracy in high-frequency metrology and imaging applications. The specific question of whether effective element sizes as small as the optical-diffraction limit can be achieved was investigated. For a polymer film sensor with a FP cavity of thickness d, the minimum effective element radius was found to be about 0.9d, and that an illumination spot radius of less than d/4 is required to achieve it
Ray-based inversion accounting for scattering for biomedical ultrasound computed tomography
An efficient and accurate image reconstruction algorithm for ultrasound tomography in soft tissue is described and demonstrated, which can recover accurate sound speed distribution from acoustic time series measurements. The approach is based on a second-order iterative minimisation of the difference between the measurements and a model based on a ray-approximation to the heterogeneous Green's function. It overcomes the computational burden of full-wave solvers while avoiding the drawbacks of time-of-flight methods. Through the use of a second-order iterative minimisation scheme, applied stepwise from low to high frequencies, the effects of scattering are incorporated into the inversion
Modelling laser ultrasound waveforms: The effect of varying pulse duration and material properties
Optical generation of ultrasound using nanosecond duration laser pulses has generated great interest both in industrial and biomedical applications. The availability of portable laser devices using semiconductor technology and optical fibres, as well as numerous source material types based on nanocomposites, has proliferated the applications of laser ultrasound. The nanocomposites can be deposited on the tip of optical fibres as well as planar hard and soft backing materials using various fabrication techniques, making devices suitable for a variety of applications. The ability to choose the acoustic material properties and the laser pulse duration gives considerable control over the ultrasound output. Here, an analytical time-domain solution is derived for the acoustic pressure waveform generated by a planar optical ultrasound source consisting of an optically absorbing layer on a backing. It is shown that by varying the optical attenuation coefficient, the thickness of the absorbing layer, the acoustic properties of the materials, and the laser pulse duration, a wide variety of pulse shapes and trains can be generated. It is shown that a source with a reflecting backing can generate pulses with higher amplitude than a source with an acoustically-matched backing in the same circumstances when stress-confinement has not been satisfied
Design of multi-frequency acoustic kinoforms
Complex diffraction limited acoustic fields can be generated from a single element transducer using
inexpensive 3-D printable acoustic kinoforms. This is extremely promising for a number of applications.
However, the lack of ability to vary the field limits the potential use of this technology. In this
work, this limitation is circumvented using multi-frequency acoustic kinoforms for which different
acoustic fields are encoded onto different driving frequencies. An optimisation approach based on
random downhill binary search is introduced for the design of the multi-frequency kinoforms. This is
applied to two test cases to demonstrate the technique: a kinoform designed to generate the numerals
“1,” “2,” and “3” in the same plane but at different driving frequencies, and a kinoform designed to
generate 3 sets of eight foci lying on a circle with a driving-frequency-dependent radius. Field measurements
from these samples confirmed that multi-frequency acoustic kinoforms can be designed that
switch between different arbitrary, pre-designed, acoustic field patterns in the target plane by changing
the driving frequenc
Advanced photoacoustic image reconstruction using the k-Wave toolbox
Reconstructing images from measured time domain signals is an essential step in tomography-mode photoacoustic imaging. However, in practice, there are many complicating factors that make it difficult to obtain high-resolution images. These include incomplete or undersampled data, filtering effects, acoustic and optical attenuation, and uncertainties in the material parameters. Here, the processing and image reconstruction steps routinely used by the Photoacoustic Imaging Group at University College London are discussed. These include correction for acoustic and optical attenuation, spatial resampling, material parameter selection, image reconstruction, and log compression. The effect of each of these steps is demonstrated using a representative in vivo dataset. All of the algorithms discussed form part of the open-source k-Wave toolbox (available from http://www.k-wave.org)
ElasticMatrix: A MATLAB toolbox for anisotropic elastic wave propagation in layered media
Simulating the propagation of elastic waves in multi-layered media has many applications. A common approach is to use matrix methods where the elastic wave-field within each material layer is represented by a sum of partial-waves along with boundary conditions imposed at each interface. While these methods are well-known, coding the required matrix formation, inversion, and analysis for general multi-layered systems is non-trivial and time-consuming. Here, a new open-source toolbox called ElasticMatrix is described which solves the problem of acoustic and elastic wave propagation in multi-layered media for isotropic and transverse-isotropic materials where the wave propagation occurs in a material plane of symmetry. The toolbox is implemented in MATLAB using an object oriented programming framework and is designed to be easy to use and extend. Methods are provided for calculating and plotting dispersion curves, displacement and stress fields, reflection and transmission coefficients, and slowness profiles
Quantifying Numerical Errors in the Simulation of Transcranial Ultrasound using Pseudospectral Methods
Effective transcranial transmission of focused ultrasound is desirable for various therapeutic applications. Time-reversal (TR) focusing based on numerical simulations of ultrasound propagation can be used to correct for the aberrating skull layer. For weakly heterogeneous media, k-space and pseudospectral time domain (PSTD) methods have been shown to have increased accuracy and efficiency compared to the finite-difference time domain (FDTD) methods typically used in TR. However, their suitability for highly heterogeneous, transcranial simulations is less clear. Here, this is established in terms of spatial and temporal sampling requirements through numerical testing and comparison with FDTD schemes. PSTD schemes are shown to give equal or better accuracy compared to FDTD schemes for modelling propagation through tissue-realistic heterogeneities, which, combined with the reduction in numerical dispersion obtained with k-space correction, recommends them for use in simulated TR
Stackable acoustic holograms
Acoustic holograms can be used to form complex distributions of pressure in 3D at MHz frequencies from simple inexpensive ultrasound
sources. The generation of such fields is vital to a diverse range of applications in physical acoustics. However, at present, the application of
acoustic holograms is severely hindered by the static nature of the resulting fields. In this work, it is shown that by intentionally reducing the
diffraction efficiency of each hologram, it is possible to create stackable acoustic holograms that can be repositioned to reconfigure the
combined acoustic field. An experimental test-case consisting of two holograms, each designed to generate a distinct distribution of acoustic
foci, is used to demonstrate the feasibility of this approach. Field scans taken for four different positions of the two holograms confirm that
the individual patterns for each hologram can be arbitrary translated relative to one another. This allows for the generation of a much greater
range of fields from a single transducer than could be created using a single hologram
Binary Volume Acoustic Holograms
In recent years, high-resolution additive manufacturing has enabled a diverse range of low-cost methods for ultrasonic wave-front shaping. Acoustic holograms, in particular, allow for the generation of arbitrary diffraction-limited acoustic fields at megahertz frequencies from single-element transducers. These are phase plates that function as direct acoustic analogs to thin optical holograms. In this work, it is shown that, by using multiple polymer three-dimensional (3D) printing, two-material (binary) acoustic analogs to "thick"or volume optical holograms can also be generated. First, an analytic approach for designing a volume hologram that diffracts a set of input fields onto a desired set of output fields is briefly summarized. Next, a greedy-optimization approach based on random downhill binary search able to account for the constraints imposed by the chosen fabrication method is introduced. Finally, an experimental test case designed to diffract the field generated by a 2.54-cm planar lead zirconate titanate (PZT) transducer onto eight distinct patterns dependent on the direction of the incident field is used to validate the approach and the design method. Field scans of the eight target fields demonstrate that acoustic analogs of optical volume holograms can be generated using multipolymer printing and that these allow the multiplexing of distinct fields onto different incident field directions
A Monitor Function for Spectral Moving Mesh Methods Applied to Nonlinear Acoustics
Spectral methods have made linear acoustics simulations highly computationally efficient, but they currently lose their efficiency when modelling nonlinear waves with regular grids. Moving mesh methods can address this by distributing mesh nodes to minimise the number of nodes needed to represent a waveform. In this paper, a monitor function is presented which is designed specifically for spectral moving mesh methods. In comparison with past monitor functions, this new monitor function significantly improves the convergence rate of the spectral moving mesh method when applied to Burgers’ equation
- …