2,167 research outputs found
Recommended from our members
The controls on earthquake ground motion in foreland-basin settings: The effects of basin and source geometry
SUMMARYRapid urban growth has led to large population densities in foreland basin regions, and therefore a rapid increase in the number of people exposed to hazard from earthquakes in the adjacent mountain ranges. It is well known that earthquake-induced ground shaking is amplified in sedimentary basins. However, questions remain regarding the main controls on this effect. It is, therefore, crucial to identify the main controls on earthquake shaking in foreland basins as a step towards mitigating the earthquake risk posed to these regions. We model seismic-wave propagation from range-front thrust-faulting earthquakes in a foreland-basin setting. The basin geometry (depth and width) and source characteristics (fault dip and source-to-basin distance) were varied, and the resultant ground motion was calculated. We find that the source depth determines the amount of near-source ground shaking and the basin structure controls the propagation of this energy into the foreland basin. Of particular importance is the relative length scales of the basin depth and dominant seismic wavelength (controlled by the source characteristics), as this controls the amount of dispersion of surface-wave energy, and so the amplitude and duration of ground motion. The maximum ground motions occur when the basin depth matches the dominant wavelength set by the source. Basins that are shallow compared with the dominant wavelength result in low-amplitude and long-duration dispersed waveforms. However, the basin structure has a smaller effect on the ground shaking than the source depth and geometry, highlighting the need for understanding the depth distribution and dip angles of earthquakes when assessing earthquake hazard in foreland-basin settings.EPSRC iCASE PhD Studentship in collaboration with Ove Arup and Partners Ltd
Imaging topographic growth by long-lived postseismic afterslip at Sefidabeh, east Iran
This paper describes observations and models of the postseismic deformation following the 1994 Sefidabeh earthquake sequence in east Iran, which shed light on the nature of the earthquake cycle and the mechanisms of topographic growth in the region. Interferometric synthetic aperture radar observations show creeping fault motion (âpostseismic afterslipâ) on an array of faults. Some of these faults probably represent the extensions of those that ruptured in the blind thrust-faulting earthquakes in 1994, and cut through the entire seismogenic layer, while others are shallow and break up the hanging walls of the coseismic faults. The postseismic slip accommodates at least part of the vertical displacement gradient resulting from the buried coseismic slip, which was concentrated at depths of greater than âŒ5âkm. The postseismic afterslip is visible for over 16 years following the earthquakes. Agreement between the areas of postseismic uplift and indications of long-term motion preserved in the geomorphology suggest that shallow fault slip during seismic cycles similar to the one we have observed governs the development of the landscape in the region. Slip on an array of shallow faults provides a mechanism for the development of short-wavelength topography and geological structures above active thrust faults and has important implications for the interpretation of shallow geological features produced in regions experiencing similar seismic cycles to that at Sefidabeh.This study forms part of the NERC- and ESRC-funded project âEarthquakes without Frontiers.âThis is the final published version of an article which originally appeared in Tectonics. It is also available from the journal's website at http://onlinelibrary.wiley.com/doi/10.1002/2013TC003462/abstract. © 2014 American Geophysical Unio
Fault rheology in an aseismic fold-thrust belt (Shahdad, eastern Iran)
Geodetic observations of aseismic deformation in a thrust belt near Shahdad in eastern Iran have been used to place constraints on the rheology of creeping faults in a thin-skinned thrust belt (<5 km thickness). Creep on shallow and high-angle thrust ramps at the range-front occurs at a steady rate, in response to the topographic gradient across the thrust belt. Parts of these thrust ramps, and the low-angle basal thrust they connect to at depth in a ramp-and-flat geometry, underwent accelerated creep following the nearby Mw 6.6 Fandoqa earthquake in 1998. Estimates of the rate of fault slip and the driving stresses in these two contrasting times reveal a non-linear relationship between the stresses and sliding velocity. The degree of non-linearity rules out bulk shear of a weak layer in the sedimentary section (e.g. evaporites) as the deformation mechanism. Instead, we suggest that the motions are accommodated by slip on faults governed by a friction law with a highly non-linear relationship between shear stress and slip rate (e.g. as predicted by ârate and stateâ models). The high-angle thrust ramps are responsible for building aspects of the geological and geomorphological signs of active shortening visible at the surface, but the folding preserved in the geology must be accomplished by other methods, possibly during the rapid transient postseismic deformation following nearby earthquakes.We thank James Jackson for use of his field photographs, and for useful dis- cussions. The SAR data used in this study were obtained from the European Space Agency. Our interferograms can be obtained from the corresponding author upon request. The topography data used was the SRTM dataset, which is freely available on the internet. RJ thanks the Marie-Curie ITN âiTECCâ for financial support. We thank Gilles Peltzer and two anonymous reviewers for comments that helped improve the manuscript. This work forms part of the NERC- and ESRC-funded project âEarthquakes Without Frontiersâ.This is the author accepted manuscript. The final version is available from Wiley via http://dx.doi.org/10.1002/2015JB01243
Recommended from our members
Estimates of fault strength from the Variscan foreland of the northern UK
We provide new insights into the long-standing debate regarding fault strength, by studying structures active in the late Carboniferous in the foreland of the Variscan Mountain range in the northern UK. We describe a method to estimate the seismogenic thickness for ancient deformation zones, at the time they were active, based upon the geometry of fault-bounded extensional basins. We then perform calculations to estimate the forces exerted between mountain ranges and their adjacent lowlands in the presence of thermal and compositional effects on the density. We combine these methods to calculate an upper bound on the stresses that could be supported by faults in the Variscan foreland before they began to slip. We find the faults had a low effective coefficient of friction (i.e. 0.02â0.24), and that the reactivated pre-existing faults were at least 30% weaker than unfaulted rock. These results show structural inheritance to be important, and suggest that the faults had a low intrinsic coefficient of friction, high pore-fluid pressures, or both.This work forms part of the NERC- and ESRC-funded project 'Earthquakes without Frontiers', and was partially supported by the NERC grant 'Looking Inside the Continents from Space'
Lateral Variations in Lower Crustal Strength Control the Temporal Evolution of Mountain Ranges: Examples From South-East Tibet
Controversy surrounds the rheology of the continental lithosphere, and how this rheology controls the evolution and behavior of mountain ranges. In this study, we investigate the effect of lateral contrasts in the strength of the lower crust, such as those between cratonic continental interiors and weaker rocks in the adjacent deforming regions, on the evolution of topography. We combine numerical modeling with recently published results from stable-isotope palaeoaltimetry in south-east Tibet. Stable-isotope palaeoaltimetry in this region provides constraints on vertical motions, which are required to distinguish between competing models for lithosphere rheology and deformation. We use numerical modeling to investigate the effect of lateral strength contrasts on the shape and temporal evolution of mountain ranges. In combination with palaeoaltimetry results, our modeling suggests that lateral strength contrasts provide a first-order control on the evolution of topography in south-east Tibet. We find that the evolution of topography in the presence of such strength contrasts leads to laterally varying topographic gradients, and to key features of the GPS- and earthquake-derived strain-rate field, without the need for a low-viscosity, lower-crustal channel. We also find that palaeoaltimetric samples may have been transported laterally for hundreds of kilometers, an effect which should be accounted for in their interpretation. Our results are likely to be applicable to the evolution of mountain ranges in general and provide an explanation for the spatial correlation between cratonic lowland regions and steep mountain range-fronts
Recommended from our members
Subduction tractions and vertical axis rotations in the Zagros-Makran transition zone, SE Iran: The 2013 May 11 M<inf>w</inf> 6.1 Minab earthquake
The source parameters and slip distribution of the 2013 May 11 Mw 6.1 Minab earthquake are studied using seismology, geodesy and field observations. We observe left-lateral strike-slip motion on a fault striking ENEâWSW; approximately perpendicular to previously studied faults in the MinabâZendanâPalami fault zone. The fault that ruptured in 2013 is one of a series of âŒEâW striking left-lateral faults visible in the geology and geomorphology. These accommodate a velocity field equivalent to right-lateral shear on âŒNâS striking planes by clockwise rotations about vertical axes. The presence of these faults can reconcile differences in estimates of fault slip rates in the western Makran from GPS and Quaternary dating. The longitudinal range of shear in the western Makran is likely to be controlled by the distance over which the underthrusting Arabian lithosphere deepens in the transition from continentâcontinent collision in the Zagros to oceanic subduction in the Makran.This work forms part of the NERC- and ESRC-funded project âEarthquakesWithout Frontiersâ. CP is funded by a NERC PhD studentship.This is the final version of the article. It first appeared from Oxford University Press via http://dx.doi.org/10.1093/gji/ggv20
Findings of the International Subarachnoid Aneurysm Trial and the National Study of Subarachnoid Haemorrhage in context.
Concern has been expressed about the applicability of the findings of the International Subarachnoid Aneurysm Trial (ISAT) with respect to the relative effects on outcome of coiling and clipping. It has been suggested that the findings of the National Study of Subarachnoid Haemorrhage may have greater relevance for neurosurgical practice. The objective of this paper was to interpret the findings of these two studies in the context of differences in their study populations, design, execution and analysis. Because of differences in design and analysis, the findings of the two studies are not directly comparable. The ISAT analysed all randomized patients by intention-to-treat, including some who did not undergo a repair, and obtained the primary outcome for 99% of participants. The National Study only analysed participants who underwent clipping or coiling, according to the method of repair, and obtained the primary outcome for 91% of participants. Time to repair was also considered differently in the two studies. The comparison between coiling and clipping was susceptible to confounding in the National Study, but not in the ISAT. The two study populations differed to some extent, but inspection of these differences does not support the view that coiling was applied inappropriately in the National Study. Therefore, there are many reasons why the two studies estimated different sizes of effect. The possibility that there were real, systematic differences in practice between the ISAT and the National Study cannot be ruled out, but such explanations must be seen in the context of other explanations relating to chance, differences in design or analysis, or confounding
- âŠ