10 research outputs found
Wind-tunnel Investigation of the Aerodynamic and Structural Deflection Characteristics of the Goodyear Inflatoplane
The Aerodynamic Characteristics of an Aspect-ratio-20 Wing Having Thick Airfoil Sections and Employing Boundary-layer Control by Suction
Recommended from our members
NACA Research Memorandums
Memorandum presenting an investigation conducted in the full-scale tunnel to determine the aerodynamic and structural deflection characteristics of the Goodyear Inflatoplane over a range of test velocities from minimum stall speed up to speeds giving load factors for wing buckling. The airplane was developed as a potential way to rescue downed pilots in enemy territory. An exploration of the stability, stalling characteristics, buckling, and chosen configuration is provided
Recommended from our members
NACA Research Memorandums
Report presenting an investigation of the surface pressures of the outer and inner surface of the bubble-type canopy in order to determine their load requirements. Testing was performed on a Grumman F8F-1 airplane. The forces on the canopy was found to be the highest when the airplane is operating at high speed with the canopy closed
Recommended from our members
NACA Research Memorandums
Report presenting an investigation of surface static pressures over the outer and inner surfaces of the cockpit canopies on the Grumman F6F-3, Curtiss SB2C-4E, and Grumman F8F-1 airplanes in the full-scale tunnel. Results regarding the external pressure distribution and internal static pressure are provided
Langley Full-Scale Tunnel Investigation of a 1/3-Scale Model of the Chance Vought XF5U-1 Airplane
The results of an investigation of a 1/3-scale model of the Chance Vought XF5U-1 airplane in the Langley full-scale tunnel are presented in this report. The maximum lift and stalling characteristics of several model configurations, the longitudinal stability characteristics of the model, and the effectiveness of the control surfaces were determined with the propellers removed. The propulsive characteristics, the effect of propeller operation on the lift, and the static thrust of the model propellers were determined at several propeller-blade angles. The results with the propellers removed showed that the maximum lift coefficient of the complete model configuration was only 0.97 was compared with the value of 1.31 for the model configuration in which the engine-air ducts and canopy are removed. The model with the propellers removed (normal center-of-gravity position) has a positive static margin, stick fixed, varying from 5 to 13 percent of the mean aerodynamic chord throughout the unstalled range of lift coefficients. The unit horizontal tail is sufficiently powerful to trim the airplane with the propellers removed throughout the unstalled range of lift coefficients. The peak propulsive efficiencies for beta = 20 degrees and beta = 30 degrees were increased 7 percent at C(sub L) congruent to 0.67 and 20 percent at C(sub L) congruent to 0.74, respectively, with the propellers rotating upward in the center than with the propellers rotating downward in the center. Indications are that the minimum forward-flight speed of the airplane for full-power operation at sea level will be about 90 miles per hour. Decreasing the weight and increasing the power reduced this value of minimum speed and there were no indications from the results of a lower limit to the minimum speed
Recommended from our members
NACA Technical Notes
Report presenting an investigation to study the aerodynamic characteristics of an aspect-ratio-20 wing with thick airfoil sections and employing boundary-layer control by suction. The results include the effects of varying suction flow rate, suction-slot configuration, wing surface condition, flap deflection, and Mach number are provided
Recommended from our members
NACA Research Memorandums
"The results of an investigation of a 1/3-scale model of the Chance Vought XF5U-1 airplane in the Langley full-scale tunnel are presented in this report. The maximum lift and stalling characteristics of several model configurations, the longitudinal stability characteristics of the model, and the effectiveness of the control surfaces were determined with the propellers removed. The propulsive characteristics, the effect of propeller operation on the lift, and the static thrust of the model propellers were determined at several propeller-blade angles" (p. 1)
Recommended from our members
NACA Research Memorandums
Report presenting the results of a preliminary investigation of a scale model of a convertible-type airplane in the full-scale tunnel. The maximum lift and stalling characteristics of several configurations, the longitudinal stability characteristics, and the effectiveness of the control surfaces with the propellers removed are provided. Results regarding the propulsive characteristics, and effect of propeller operation on the lift and static thrust of the model propellers are also provided