150,231 research outputs found
MODELING OF HOPPER DISCHARGE
Hoppers are widely used in many engineering processes. The discharging of granular mate- rials from a hopper is a critical topic of industrial importance, and the discharge flow rate from hoppers is the focus of the current work. Many parameters influence the discharge rate including: the hopper outlet width, the angle of the hopper wall, the particle size, and particle friction, and so on. Due to the expensive of examining a large variety of particle types and hopper conditions, computational simulation has been widely studied in an effort to establish an alternative method of determining critical factors impacting hopper flow.
In this thesis, the process of hopper discharge has been simulated by the Discrete Element Method (DEM), which is one of the most popular methods for granular flow simulation. To validate against existing experiments, all conditions were matched as closely as possible to those in the experiment. The particles used in our simulation are spheroids with diameters of 0.77 cm. The angles of the hoppers examined range from 0◦ to 90◦, while the opening sizes vary from 2.9 cm to 4.3 cm. Computationally, the friction coefficient has been adjusted several times and finally is set to 0.5 in the simulation in order to fit the experimental resultsas closely as possible. As a quantitative test of the simulation fidelity we compare the hopper empty time t – which is related to the hopper discharge rate – for these different hopper angles and hopper opening size. As a secondary test of the fit, the survival time τ, the normal force profile, the velocity profile, and the probability of jamming Ps are also computed and compared to existing experimental data from collaborators at Duke University. Ultimately, the goal of the work is to establish the degree of model fidelity necessary in order to closely mimic the experimental results obtained
AIS-BN: An Adaptive Importance Sampling Algorithm for Evidential Reasoning in Large Bayesian Networks
Stochastic sampling algorithms, while an attractive alternative to exact
algorithms in very large Bayesian network models, have been observed to perform
poorly in evidential reasoning with extremely unlikely evidence. To address
this problem, we propose an adaptive importance sampling algorithm, AIS-BN,
that shows promising convergence rates even under extreme conditions and seems
to outperform the existing sampling algorithms consistently. Three sources of
this performance improvement are (1) two heuristics for initialization of the
importance function that are based on the theoretical properties of importance
sampling in finite-dimensional integrals and the structural advantages of
Bayesian networks, (2) a smooth learning method for the importance function,
and (3) a dynamic weighting function for combining samples from different
stages of the algorithm. We tested the performance of the AIS-BN algorithm
along with two state of the art general purpose sampling algorithms, likelihood
weighting (Fung and Chang, 1989; Shachter and Peot, 1989) and self-importance
sampling (Shachter and Peot, 1989). We used in our tests three large real
Bayesian network models available to the scientific community: the CPCS network
(Pradhan et al., 1994), the PathFinder network (Heckerman, Horvitz, and
Nathwani, 1990), and the ANDES network (Conati, Gertner, VanLehn, and Druzdzel,
1997), with evidence as unlikely as 10^-41. While the AIS-BN algorithm always
performed better than the other two algorithms, in the majority of the test
cases it achieved orders of magnitude improvement in precision of the results.
Improvement in speed given a desired precision is even more dramatic, although
we are unable to report numerical results here, as the other algorithms almost
never achieved the precision reached even by the first few iterations of the
AIS-BN algorithm
Recommended from our members
Optimisation of the hydrotesting sequence in tank farm construction using an adaptive genetic algorithm with stochastic preferential logic
In the construction of tank farms there is a requirement for the tanks to be hydro-tested in order to verify that they are leak proof as well as proving the lack of differential settlement in the foundations. The tanks will be required to be filled to a predetermined level and then to maintain this loaded state for a certain period of time before being drained. In areas such as the Middle East water for hydro-testing is not freely available as sea water is often not suitable for this purpose, so fresh water needs to be produced or transported to the construction site for this purpose. It is therefore of major benefit to the project to schedule the hydro-testing of the tanks in such a manner as to minimize the utilization of hydro-test water.
This problem is a special case of the Resource Constrained Project Scheduling Problem (RCPSP) and in this research we have modified our previously developed Fitness differential adaptive genetic algorithm [4, 6 & 7] to the solution of this real world problem.
The Algorithm has been ported from the original MATLAB code into Microsoft Project using VBA in order to provide a more user friendly, practical interface
- …