Accurate thickness measurement of easily compressed materials

Sheet of material is placed between two thin, uniform, and flat sheets of glass of known thickness; light pressure is applied by means of weights. Micrometer aids thickness measurement of sandwich. Thickness of two sheets of glass is then subtracted

Improved insulating materials effective at extremely high temperatures

Wrapped molybdenum foil with silica fabric insulation and wrapped tantalum foil with carbon fabric insulation are usable to 1367 K and up to 2478 K, respectively, both offer marked space saving and efficiency in high temperature operations. Graph displays temperature profiles at end of firing period

Selective tube roughening increases heat transfer capability

Selectively roughening inside surfaces of tubes increases the heat transfer capabilities, but minimizes the pressure drop. This technique is used to construct roughened test sections for hydrogen heat transfer studies

Inverse transonic airfoil design methods including boundary layer and viscous interaction effects

This report covers the period 1 September 1983 to 31 January 1984. The primary task during this reporting period was the continued development of the massive separation model and computer code (SKANSEP). In particular, detailed investigations were conducted with the boundary layer displacement surface correction technique discovered near the end of the last reporting period. This report will present detailed results using this technique and show comparisons with experimental data

Transonic airfoil design using Cartesian coordinates

A numerical technique for designing transonic airfoils having a prescribed pressure distribution (the inverse problem) is presented. The method employs the basic features of Jameson's iterative solution for the full potential equation, except that inverse boundary conditions and Cartesian coordinates are used. The method is a direct-inverse approach that controls trailing-edge closure. Examples show the application of the method to design aft-cambered and other airfoils specifically for transonic flight

Inverse transonic airfoil design methods including boundary layer and viscous interaction effects

A body-fitted grid embedment technique applicable to inviscid transonic airfoil flow field analysis was developed and verified through a series of tests. Test cases used to verify the technique show that the accuracy of the solution was increased by grid embedding. This enhancement of the solution is especially true when small supercritical zones occur which cannot be adequately described using the main grid only. Results obtained with the SKANFP full potential program are considered with regard to the massive separated flow and high lift and the undesirable unrealistic 'bump' in the vicinity of the separation point due to a mismatch between the unseparated and separated pressure distributions. Techniques used to eliminate this feature are discussed

Transonic airfoil flowfield analysis using Cartesian coordinates

A numerical technique for analyzing transonic airfoils is presented. The method employs the basic features of Jameson's iterative solution for the full potential equation, except that Cartesian coordinates are used rather than a grid which fits the airfoil, such as the conformal circle-plane or 'sheared parabolic' coordinates which were used previously. Comparison with previous results shows that it is not necessary to match the computational grid to the airfoil surface, and that accurate results can be obtained with a Cartesian grid for lifting supercritical airfoils

Inverse transonic airfoil design methods including boundary layer and viscous interaction effects

The results are reported of the research on the viscous interactions effects on transonic airfoil design and analysis. The boundary layer methods and the design program are discussed

Development of inverse inviscid transonic solution methods

A numerical method suitable for the analysis and/or design of supercritical transonic airfoils is reported. In order to achieve accuracy, the method utilizes the full inviscid potential flow equations; and in order to remain simple it solves the problem in a stretched Cartesian grid system. The resulting computer program has several advantages over others of its type -- its use in either the direct analysis mode in which the airfoil shape is prescribed and the flow field and surface pressures are determined, or in the inverse mode in which the surface pressures are given and the airfoil shape and flow field are computed. Other advantages of the program include its use in a design program, the rotated finite difference scheme and its determination of the airfoil shape simultaneously with the flow field relaxation solution