An ultrahigh pressure mineral assemblage from the Luobusa Ophiolite, Tibet

Abstract in http://www.lpi.usra.edu/meetings/gold2001/pdf/3138.pd

Review of high concentration photovoltaic thermal hybrid systems for highly efficient energy cogeneration

This is the final version.Available on open access from Elsevier via the DOI in this recordConcentrated photovoltaic/thermal hybrid systems are a combination of concentrated photovoltaics and photovoltaic/thermal hybrid systems which capture waste heat for later application. Higher concentrations lead to higher energy fluxes over smaller areas which is beneficial for several reasons. Firstly, less photovoltaic material is required, instead using relatively cheap optics. This allows more efficient types of PV material to be used effectively. Secondly, the concentrated heat flux easily allows for a high outlet temperature which in turn increases the applicability. Point focused systems have experimentally achieved cogeneration efficiencies of 86.47% (excluding system losses) and concentrations of over 1000 suns, but the technology still faces challenges. The design of the cooling system must be optimised to maximise both electrical and thermal efficiency. Furthermore, the optics and cell interconnections must mitigate the effects a non-uniform focal image for high electrical efficiencies. These challenges must be faced while minimising the thermal stresses the system undergoes to ensure the system has a substantial lifetime. This review provides an in depth understanding of the challenges and function of point focused concentrated photovoltaic/thermal systems. From the literature, it is clear more focus should be put on microchannel/impinging jet hybrid cooling systems for use in dense array concentrated photovoltaic/thermal systems. More physical experimentation is needed, especially full model systems which include the output image of the optics, along with consideration to alternative cooling fluids (particularly nanofluids).Engineering and Physical Sciences Research Council (EPSRC

Optical Losses and Durability of 4-Domed Optic for Concentrator Photovoltaics

This is the author accepted manuscript.The use of optical elements to focus light onto a smaller area of semiconductor material can enhance the cost effectiveness and electrical performance. Enabling ultrahigh concentration ratios for photovoltaic systems requires an optic bonded directly to the solar cell to further concentrate and homogenise the illumination, as well as to improve the acceptance angle. For many optical materials manufacture flaws are common, and difficult to prevent. An estimation of the effective external quantum efficiency of the receiver based on the material’s transmissivity tells us the effect of added absorptivity from manufacture defects. Evaluating the module under a solar simulator under various angles yields information on how scattered light changes the optic’s concentration ability. This study suggests sapphire has higher optical losses due to its higher refractive index compared to slygard184. Thus, the need for a higher refractive index material must be considered carefully and matched with anti-reflective coatings if needed. The effective concentration of slygard-184 notably suffers when flaws are present, dropping up to 48.2%. Further, the optimum angle is difficult to predict. Minor flaws could be deemed acceptable in performance when high acceptance angles are not the primary design requirement.Engineering and Physical Sciences Research Council (EPSRC

A bi-directional relationship between obesity and health-related quality of life : evidence from the longitudinal AusDiab study

Objective: To assess the prospective relationship between obesity and health-related quality of life, including a novel assessment of the impact of health-related quality of life on weight gain.Design and setting: Longitudinal, national, population-based Australian Diabetes, Obesity and Lifestyle (AusDiab) study, with surveys conducted in 1999/2000 and 2004/2005.Participants: A total of 5985 men and women aged 25 years at study entry.Main outcome measure(s): At both time points, height, weight and waist circumference were measured and self-report data on health-related quality of life from the SF-36 questionnaire were obtained. Cross-sectional and bi-directional, prospective associations between obesity categories and health-related quality of life were assessed.Results: Higher body mass index (BMI) at baseline was associated with deterioration in health-related quality of life over 5 years for seven of the eight health-related quality of life domains in women (all P0.01, with the exception of mental health, P&gt;0.05), and six out of eight in men (all P&lt;0.05, with the exception of role-emotional, P=0.055, and mental health, P&gt;0.05). Each of the quality-of-life domains related to mental health as well as the mental component summary were inversely associated with BMI change (all P&lt;0.0001 for women and P0.01 for men), with the exception of vitality, which was significant in women only (P=0.008). For the physical domains, change in BMI was inversely associated with baseline general health in women only (P=0.023).Conclusions: Obesity was associated with a deterioration in health-related quality of life (including both physical and mental health domains) in this cohort of Australian adults followed over 5 years. Health-related quality of life was also a predictor of weight gain over 5 years, indicating a bi-directional association between obesity and health-related quality of life. The identification of those with poor health-related quality of life may be important in assessing the risk of future weight gain, and a focus on health-related quality of life may be beneficial in weight management strategies.<br /

Outdoor experimental validation for ultra-high concentrator photovoltaic with serpentine-based cooling system

This is the final version. Available from Elsevier via the DOI in this record.With demand for renewable energy growing, concentrator photovoltaic thermal hybrids have great potential. Maximising concentration ratios through the deployment of multi-stage optics can yield high power outputs from multi-junction solar cells. To prevent damaging thermal stress and to enable extraction of thermal energy, a capable cooling system is necessary. The primary objective of this study is to maximise the effective concentration ratio over a solar cell and calibrate the system to optimise the energetic and exergetic efficiencies. The capability of the serpentine-based cooling system is investigated for each concentrator optic configuration. Originality is found in the presentation of the 3-stage optic, and the use of outdoor real-world experimental data to validate a computational model. This model uses both ray tracing, heat and mass transfer simulations to enhance the understanding of system operation and enable accurate prediction of performance under various conditions. Results show focal spot shape is more important than raw optical efficiency for electrical output, making the 3-stage optic superior to the other configurations in most regards. An effective concentration of over 1200 × is achieved. Higher exergetic efficiencies are consistently found in the double serpentine configuration, though variation does not exceed ±0.3% when only changing cooling system geometry.Engineering and Physical Sciences Research CouncilSaudi Arabia Culture Bureau in the U

Indoor experimental analysis of Serpentine-Based cooling scheme for high concentration photovoltaic thermal systems

This is the final version. Available on open access from Elsevier via the DOI in this record.Data availability statement: Data will be made available on request.High concentration photovoltaic thermal hybrids are expected to play an important role in meeting growing energy demands. When approaching concentrations over 1000 suns, a cooling system is needed to maximise both the thermal and electrical performance of the multi-junction solar cell without producing excessive parasitic losses. This study develops a novel simulation model to provide an in-depth understanding of the functionality of a concentrated photovoltaic thermal hybrid system with serpentine-based cooling systems. An ultra-high concentrator photovoltaic optic irradiance profile (peak effective concentration ratio: ∼1500 suns) is considered within the simulation model, which has been validated through indoor experimentation. The effectiveness of cooling is also evaluated through maximum thermal stresses generated in the multi-junction solar cell. The double serpentine design was deemed the highest performing, primarily because of the single serpentine’s excessive pressure drop. Copper as the heat sink material yielded superior performance because of its higher thermal conductivity. The maximum total exergetic efficiency achieved by the receiver was ∼ 10.9% with this configuration. Compared to some examples in the literature this value may seem low, however, it is more accurate due to the inclusion of a specific irradiance profile. All serpentine-based cooling systems could maintain the recommended operating temperature.Engineering and Physical Sciences Research Council (EPSRC)Saudi Arabia Culture Bureau, U

Prostate-specific antigen testing accuracy in community practice

BACKGROUND: Most data on prostate-specific antigen (PSA) testing come from urologic cohorts comprised of volunteers for screening programs. We evaluated the diagnostic accuracy of PSA testing for detecting prostate cancer in community practice. METHODS: PSA testing results were compared with a reference standard of prostate biopsy. Subjects were 2,620 men 40 years and older undergoing (PSA) testing and biopsy from 1/1/95 through 12/31/98 in the Albuquerque, New Mexico metropolitan area. Diagnostic measures included the area under the receiver-operating characteristic curve, sensitivity, specificity, and likelihood ratios. RESULTS: Cancer was detected in 930 subjects (35%). The area under the ROC curve was 0.67 and the PSA cutpoint of 4 ng/ml had a sensitivity of 86% and a specificity of 33%. The likelihood ratio for a positive test (LR+) was 1.28 and 0.42 for a negative test (LR-). PSA testing was most sensitive (90%) but least specific (27%) in older men. Age-specific reference ranges improved specificity in older men (49%) but decreased sensitivity (70%), with an LR+ of 1.38. Lowering the PSA cutpoint to 2 ng/ml resulted in a sensitivity of 95%, a specificity of 20%, and an LR+ of 1.19. CONCLUSIONS: PSA testing had fair discriminating power for detecting prostate cancer in community practice. The PSA cutpoint of 4 ng/ml was sensitive but relatively non-specific and associated likelihood ratios only moderately revised probabilities for cancer. Using age-specific reference ranges and a PSA cutpoint below 4 ng/ml improved test specificity and sensitivity, respectively, but did not improve the overall accuracy of PSA testing

Physical activity and health related quality of life

Copyright @ 2012 Anokye et al.; licensee BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.This article has been made available through the Brunel Open Access Publishing Fund.BACKGROUND: Research on the relationship between Health Related Quality of Life (HRQoL) and physical activity (PA), to date, have rarely investigated how this relationship differ across objective and subjective measures of PA. The aim of this paper is to explore the relationship between HRQoL and PA, and examine how this relationship differs across objective and subjective measures of PA, within the context of a large representative national survey from England. METHODS: Using a sample of 5,537 adults (40–60 years) from a representative national survey in England (Health Survey for England 2008), Tobit regressions with upper censoring was employed to model the association between HRQoL and objective, and subjective measures of PA controlling for potential confounders. We tested the robustness of this relationship across specific types of PA. HRQoL was assessed using the summary measure of health state utility value derived from the EuroQol-5 Dimensions (EQ-5D) whilst PA was assessed via subjective measure (questionnaire) and objective measure (accelerometer- actigraph model GT1M). The actigraph was worn (at the waist) for 7 days (during waking hours) by a randomly selected sub-sample of the HSE 2008 respondents (4,507 adults – 16 plus years), with a valid day constituting 10 hours. Analysis was conducted in 2010. RESULTS: Findings suggest that higher levels of PA are associated with better HRQoL (regression coefficient: 0.026 to 0.072). This relationship is consistent across different measures and types of PA although differences in the magnitude of HRQoL benefit associated with objective and subjective (regression coefficient: 0.047) measures of PA are noticeable, with the former measure being associated with a relatively better HRQoL (regression coefficient: 0.072). CONCLUSION: Higher levels of PA are associated with better HRQoL. Using an objective measure of PA compared with subjective shows a relatively better HRQoL.This project was funded by the NIHR Health Technology Assessment programme (project number 08/72/01)

The effect of parental wealth on children’s outcomes in early adulthood

Using data from the British Household Panel Survey we show that parental wealth has a positive association with a range of outcomes in early adulthood. The outcome that exhibits the strongest association with parental wealth is higher educational attainment. This association is mainly concentrated at the lower half of the distribution and remains strong after controlling for a wide range confounding family characteristics. Parental wealth also has a positive relationship with children’s employment probability and earnings, although the gradient for both outcomes is rather weak and largely mediated by children’s education. A potential driver of the small size of the latter effects is the young age of the sample

Reliability of measuring abductor hallucis muscle parameters using two different diagnostic ultrasound machines

<p>Abstract</p> <p>Background</p> <p>Diagnostic ultrasound provides a method of analysing soft tissue structures of the musculoskeletal system effectively and reliably. The aim of this study was to evaluate within and between session reliability of measuring muscle dorso-plantar thickness, medio-lateral length and cross-sectional area, of the abductor hallucis muscle using two different ultrasound machines, a higher end Philips HD11 Ultrasound machine and clinically orientated Chison 8300 Deluxe Digital Portable Ultrasound System.</p> <p>Methods</p> <p>The abductor hallucis muscle of both the left and right feet of thirty asymptomatic participants was imaged and then measured using both ultrasound machines. Interclass correlation coefficients (ICC) with 95% confidence intervals (CI) were used to calculate both within and between session intra-tester reliability. Standard error of the measurement (SEM) calculations were undertaken to assess difference between the actual measured score across trials and the smallest real difference (SRD) was calculated from the SEM to indicate the degree of change that would exceed the expected trial to trial variability.</p> <p>Results</p> <p>The ICCs, SEM and SRD for dorso-plantar thickness and medial-lateral length were shown to have excellent to high within and between-session reliability for both ultrasound machines. The between-session reliability indices for cross-sectional area were acceptable for both ultrasound machines.</p> <p>Conclusion</p> <p>The results of the current study suggest that regardless of the type ultrasound machine, intra-tester reliability for the measurement the abductor hallucis muscle parameters is very high.</p