940 research outputs found
Avoiding tunnel collisions between fibular collateral ligament and ACL posterolateral bundle reconstruction
STUDIO DI ASSOCIAZIONE TRA BASSI LIVELLI DI DENSITA' MINERALE OSSEA E MILD COGNITIVE IMPAIRMENT, MALATTIA DI ALZHEIMER E MALATTIA DI PARKINSON. STUDIO SU UN CAMPIONE AMBULATORIALE.
Effect of suturing the femoral portion of a four-strand graft during an ACL reconstruction.
Purpose A suture passed along the part of the graft that will be inserted into the femoral tunnel is widely used by surgeons, because it could prevent the graft sliding on the femoral fixation device during pulling from the tibial side. The aim of this study was to evaluate the biomechanical effects of suturing the intratunnel femoral part of the graft during an anterior cruciate ligament (ACL) reconstruction. Methods Bovine digital extensor tendons and tibias were harvested from 20 fresh-frozen mature bovine knees ranging in age from 18 to 24 months. Quadruple-strand bovine tendons were passed through the tibial tunnel and secured distally with a bioabsorbable interference screw. In one half of all grafts (N = 10), the looped-over part of the graft was sutured in a whipstitch technique over a distance of 30 mm (Group 1). In one half of all grafts (N = 10), the looped-over part was left free from any suture (Group 2). The grafts were preconditioned at 50 N for 10 min, fol- lowed by cyclic loading at 1 Hz between 50 N and 250 N for 1,000 cycles. Load-to-failure test was then carried out at a rate of 1 mm/s.
Results There was no statistically significant difference between mean stiffness at pullout and yield load between the two groups. In all specimens on Group 1, failure occurred following to partial breaking and then slipping of the tendons between the screw and the tunnel. Concerning Group 2, in six cases failure occurred as described for Group 1 specimens. In the remaining four cases, failure occurred entirely through the ligament mid-substance. Conclusions Suturing in a whipstitch fashion the femoral portion of the graft doesn’t affect the mechanical proprie- ties of the ACL graft. When suspension fixation device is used, suturing the looped-over part of the graft could be helpful in order to provide equal tension in all of the strands of the graft at time of tibial fixation
Does the association of therapeutic exercise and supplementation with sucrosomial magnesium improve posture and balance and prevent the risk of new falls?
Background Fracture of the proximal femur is the most feared complication of osteoporosis. Given the numerous physiological functions that magnesium performs in our body, in the literature there is a correlation between osteoporosis and
low serum levels of magnesium.
Aim Evaluate the incidence of hypomagnesemia in patients with lateral fragility fracture of the proximal femur, the possible
correlation between serum magnesium levels and fractures, and the efectiveness of supplementing Sucrosomial® magnesium
associated with therapeutic exercise on the outcome of these patients.
Methods We divided the study into two parts. In the frst part, we assessed the preoperative incidence of hypomagnesemia
in patients using a blood test. In the second part, patients with hypomagnesemia were divided, in the post-operative period,
into two groups, who received, respectively, only therapeutic exercise or oral supplementation with sucrosomial magnesium
associated with therapeutic exercise.
Results Half of the patients with fragility femoral fracture had hypomagnesemia, with a higher incidence of the subclinical
form. From the comparison between the two groups, the T1 treatment group showed a signifcant improvement in blood
levels of magnesium (2.11±0.15 vs. 1.94±0.11; p<0.05), on the NRS scale (5.7±0.81 vs. 6.6±1.18; p<0.05), the Tinetti
scale (17.3±1.15 vs. 15.2±2.98; p<0.05) and the SarQoL questionnaire (47.3±5.21 vs. 44.9±5.54; p<0.05).
Conclusions More attention would be needed in the diagnosis and correction of subclinical hypomagnesemia and not just
the simple and clinically evident one, including hypomagnesemia among the modifable risk factors for osteoporosis
Does the 5-strand-graft have superior biomechanical behaviour than 4-strand-graft during acl reconstruction?
Purpose. This study aimed to compare the biomechanical proprieties of 4 and 5-strand- grafts.
Methods. For the present study, fresh-frozen bovine common digital extensor tendons were used. Tendon grafts were prepared and sized to have a length of almost 27 cm and a cylinder 4 strand diameter of 8 mm. In half of all samples (Group A, n=12,), the graft was formed by 2 bundles duplicated around a metallic rod creating a 4-strand-tendon construct. In the other half of samples (Group B, n= 12,) 5-strand-tendon construct was created duplicating a single tendon around the rod, and tripling the other one. The grafts were preconditioned at 50 N for 10 min, followed by 1,000 cyclic loading between 50 and 250 N. Load-to-failure test was then carried out at a rate of 1 mm/s.
Results. No statistically significant differences were found between two groups concern- ing cyclic elongation at the 500th cycle and at the final cycle. An increased stiffness was observed in the Group B during cyclic loads and at pull-out (p<0.05). Significant differ- ences were noted at the ultimate load-to-failure between Group A (1533 ± 454 N) and Group B (1139 ± 276 N) (p< 0.05).
Conclusion. This study showed that both graft construct appears to be biomechanical- ly effective in a bovine tendon model. 5-strand-graft showed an increased stiffness and a decreased ultimate load-to-failure comparing to the 4-strand-graft construct. Biomechan- ically, no real benefit could be observed in the clinical setting increasing the numbers of strands used for the ACL reconstructive surgery
Rehabilitation approach in robot assisted total knee arthroplasty: an observational study
Background The purpose of this study is to evaluate the impact of total knee arthroplasty (TKA) with the aid of
Navio Robot, comparing it with standard prosthetic surgery on the functional outcomes of patients after an intensive
rehabilitation program.
Method A case–control observational study was conducted on patients undergoing TKA for severe KOA. All patients
underwent the same intensive hospital rehabilitation program of 14 daily sessions lasting 3 h. The following rating
scales were administered: Numeric Rating Scale (NRS), Knee Society Score (KSS) and 12-Item Short Form Survey scale.
Patient assessments were performed 1 week post-surgery (T0), 1 month post-surgery (T2), and 3 months post-surgery
(T3). The primary outcomes were active knee extension and fexion and pain severity. The secondary outcomes were
functional capacity and quality of life.
Results Using repeated measures ANOVA, we observed at T1 a statistically diferent diference for the treatment
group compared to the control group about KSS (p<0.05), pain (p<0.05), and knee fexion (p<0.05). No statistically signifcant diference between the two groups was observed for knee extension (p=0.09) and the SF-12 scale
(p=0.52). At T2 instead, we observed a statistically signifcant diference for the treatment group compared to the
control group as regards KSS (p<0.05) and knee fexion (p<0.05), while no statistically signifcant diference was
observed for pain (p=0.83), knee extension (p=0.60), and the SF-12 scale (0.44).
Conclusions Our study has demonstrated that robot-NAVIO assisted knee prosthesis surgery, associated with a specifc intensive rehabilitation treatment, in the short and medium term, determines good pain control, better fexion
recovery and a improvement of functional capacity
Study of a constrained finite element elbow prosthesis: the influence of the implant placement
BackgroundThe functional results of total elbow arthroplasty (TEA) are controversial and the medium- to long-term revision rates are relatively high. The aim of the present study was to analyze the stresses of TEA in its classic configuration, identify the areas of greatest stress in the prosthesis-bone-cement interface, and evaluate the most wearing working conditions.Materials and methodsBy means of a reverse engineering process and using a 3D laser scanner, CAD (computer-aided drafting) models of a constrained elbow prosthesis were acquired. These CAD models were developed and their elastic properties, resistance, and stresses were studied through finite element analysis (finite element method-FEM). The obtained 3D elbow-prosthesis model was then evaluated in cyclic flexion-extension movements (> 10 million cycles). We highlighted the configuration of the angle at which the highest stresses and the areas most at risk of implant mobilization develop. Finally, we performed a quantitative study of the stress state after varying the positioning of the stem of the ulnar component in the sagittal plane by +/- 3 degrees.ResultsThe greatest von Mises stress state in the bone component for the 90 degrees working configuration was 3.1635 MPa, which occurred in the most proximal portion of the humeral blade and in the proximal middle third of the shaft. At the ulnar level, peaks of 4.1763 MPa were recorded at the proximal coronoid/metaepiphysis level. The minimum elastic resistance and therefore the greatest stress states were recorded in the bone region at the apex of the ulnar stem (0.001967 MPa). The results of the analysis for the working configurations at 0 degrees and 145 degrees showed significant reductions in the stress states for both prosthetic components; similarly, varying the positioning of the ulnar component at 90 degrees (- 3 degrees in the sagittal plane, 0 degrees in the frontal plane) resulted in better working conditions with a greater resulting developed force and a lower stress peak in the ulnar cement.ConclusionThe areas of greatest stress occur in specific regions of the ulnar and humeral components at the bone-cement-prosthesis interface. The heaviest configuration in terms of stresses was when the elbow was flexed at 90 degrees. Variations in the positioning in the sagittal plane can mechanically affect the movement, possibly resulting in longer survival of the implant.Level of evidence:
A case of bilateral luxatio erecta
Luxatio erecta is an uncommon form of glenohumeral dislocation. Cases of bilateral inferior shoulder dislocation (luxatio erecta) are very rare, and only ten cases have been described in literature. We describe a case of a woman with bilateral luxatio erecta of the shoulders treated with close reduction, immobilization and rehabilitation. The patient had fallen downstairs while clinging to both lateral banisters
Adhesive/Dentin Interface: The Weak Link in the Composite Restoration
Results from clinical studies suggest that more than half of the 166 million dental restorations that were placed in the United States in 2005 were replacements for failed restorations. This emphasis on replacement therapy is expected to grow as dentists use composite as opposed to dental amalgam to restore moderate to large posterior lesions. Composite restorations have higher failure rates, more recurrent caries, and increased frequency of replacement as compared to amalgam. Penetration of bacterial enzymes, oral fluids, and bacteria into the crevices between the tooth and composite undermines the restoration and leads to recurrent decay and premature failure. Under in vivo conditions the bond formed at the adhesive/dentin interface can be the first defense against these noxious, damaging substances. The intent of this article is to review structural aspects of the clinical substrate that impact bond formation at the adhesive/dentin interface; to examine physico-chemical factors that affect the integrity and durability of the adhesive/dentin interfacial bond; and to explore how these factors act synergistically with mechanical forces to undermine the composite restoration. The article will examine the various avenues that have been pursued to address these problems and it will explore how alterations in material chemistry could address the detrimental impact of physico-chemical stresses on the bond formed at the adhesive/dentin interface
Simultaneous chronic rupture of quadriceps tendon and contra-lateral patellar tendon in a patient affected by tertiary hyperparatiroidism
Spontaneous ruptures of the extensor mechanism of the knee are very rare. They tend to increase considerably in patients with metabolic diseases such as chronic renal failure, hyperparathyroidism, diabetes, gout, and systemic lupus erythematosus. The reported case regards a 48-year-old man with chronic, spontaneous and simultaneous quadriceps, and contra-lateral patellar tendon rupture. The patient suffered from chronic renal failure and for the past year from tertiary hyperparathyroidism. Ruptured tendons were repaired and both knee were evaluated monthly for the next 12 months. Good functional recovery was achieved on both knees without relapse. This case emphasizes the importance of long-term high parathyroid hormone level in the etiology of tendons ruptures
- …