2,281 research outputs found
Interfacial layering in a three-component polymer system
We study theoretically the temporal evolution and the spatial structure of
the interface between two polymer melts involving three different species (A,
A* and B). The first melt is composed of two different polymer species A and A*
which are fairly indifferent to one another (Flory parameter chi_AA* ~ 0). The
second melt is made of a pure polymer B which is strongly attracted to species
A (chi_AB 0). We then show
that, due to these contradictory tendencies, interesting properties arise
during the evolution of the interface after the melts are put into contact: as
diffusion proceeds, the interface structures into several adjacent
"compartments", or layers, of differing chemical compositions, and in addition,
the central mixing layer grows in a very asymmetric fashion. Such unusual
behaviour might lead to interesting mechanical properties, and demonstrates on
a specific case the potential richness of multi-component polymer interfaces
(as compared to conventional two-component interfaces) for various
applications.Comment: Revised version, to appear in Macromolecule
Stripes of Partially Fluorinated Alkyl Chains: Dipolar Langmuir Monolayers
Stripe-like domains of Langmuir monolayers formed by surfactants with
partially fluorinated lipid anchors (F-alkyl lipids) are observed at the
gas-liquid phase coexistence. The average periodicity of the stripes, measured
by fluorescence microscopy, is in the micrometer range, varying between 2 and 8
microns. The observed stripe-like patterns are stabilized due to dipole-dipole
interactions between terminal -CF3 groups. These interactions are particularly
strong as compared with non-fluorinated lipids due to the low dielectric
constant of the surrounding media (air). These long-range dipolar interactions
tend to elongate the domains, in contrast to the line tension that tends to
minimize the length of the domain boundary. This behavior should be compared
with that of the lipid monolayer having alkyl chains, and which form spherical
micro-domains (bubbles) at the gas-liquid coexistence. The measured stripe
periodicity agrees quantitatively with a theoretical model. Moreover, the
reduction in line tension by adding traces (0.1 mol fraction) of cholesterol
results, as expected, in a decrease in the domain periodicity.Comment: 20 pages, 4 fig
Contact line motion for partially wetting fluids
We study the flow close to an advancing contact line in the limit of small
capillary number. To take into account wetting effects, both long and
short-ranged contributions to the disjoining pressure are taken into account.
In front of the contact line, there is a microscopic film corresponding to a
minimum of the interaction potential. We compute the parameters of the contact
line solution relevant to the matching to a macroscopic problem, for example a
spreading droplet. The result closely resembles previous results obtained with
a slip model
Generic morphologies of viscoelastic dewetting fronts
A simple model is put forward which accounts for the occurrence of certain
generic dewetting morphologies in thin liquid coatings. It demonstrates that by
taking into account the elastic properties of the coating, a morphological
phase diagram may be derived which describes the observed structures of
dewetting fronts. It is demonstrated that dewetting morphologies may also serve
to determine nanoscale rheological properties of liquids.Comment: 4 pages, 2 figure
Liquid-liquid coexistence in the phase diagram of a fluid confined in fractal porous materials
Multicanonical ensemble sampling simulations have been performed to calculate
the phase diagram of a Lennard-Jones fluid embedded in a fractal random matrix
generated through diffusion limited cluster aggregation. The study of the
system at increasing size and constant porosity shows that the results are
independent from the matrix realization but not from the size effects. A
gas-liquid transition shifted with respect to bulk is found. On growing the
size of the system on the high density side of the gas-liquid coexistence curve
it appears a second coexistence region between two liquid phases. These two
phases are characterized by a different behaviour of the local density inside
the interconnected porous structure at the same temperature and chemical
potential.Comment: 5 pages, 4 figures. To be published in Europhys. Letter
Monomer dynamics of a wormlike chain
We derive the stochastic equations of motion for a tracer that is tightly
attached to a semiflexible polymer and confined or agitated by an externally
controlled potential. The generalised Langevin equation, the power spectrum,
and the mean-square displacement for the tracer dynamics are explicitly
constructed from the microscopic equations of motion for a weakly bending
wormlike chain by a systematic coarse-graining procedure. Our accurate
analytical expressions should provide a convenient starting point for further
theoretical developments and for the analysis of various single-molecule
experiments and of protein shape fluctuations.Comment: 6 pages, 4 figure
A diaphragmatic electrical activity-based optimization strategy during pressure support ventilation improves synchronization but does not impact work of breathing.
Poor patient-ventilator synchronization is often observed during pressure support ventilation (PSV) and has been associated with prolonged duration of mechanical ventilation and poor outcome. Diaphragmatic electrical activity (Eadi) recorded using specialized nasogastric tubes is a surrogate of respiratory brain stem output. This study aimed at testing whether adapting ventilator settings during PSV using a protocolized Eadi-based optimization strategy, or Eadi-triggered and -cycled assisted pressure ventilation (or PSVN) could (1) improve patient-ventilator interaction and (2) reduce or normalize patient respiratory effort as estimated by the work of breathing (WOB) and the pressure time product (PTP).
This was a prospective cross-over study. Patients with a known chronic pulmonary obstructive or restrictive disease, asynchronies or suspected intrinsic positive end-expiratory pressure (PEEP) who were ventilated using PSV were enrolled in the study. Four different ventilator settings were sequentially applied for 15Â minutes (step 1: baseline PSV as set by the clinician, step 2: Eadi-optimized PSV to adjust PS level, inspiratory trigger, and cycling settings, step 3: step 2â+âPEEP adjustment, step 4: PSVN). The same settings as step 3 were applied again after step 4 to rule out a potential effect of time. Breathing pattern, trigger delay (Td), inspiratory time in excess (Tiex), pressure-time product (PTP), and work of breathing (WOB) were measured at the end of each step.
Eleven patients were enrolled in the study. Eadi-optimized PSV reduced Td without altering Tiex in comparison with baseline PSV. PSVN reduced Td and Tiex in comparison with baseline and Eadi-optimized PSV. Respiratory pattern did not change during the four steps. The improvement in patient-ventilator interaction did not lead to changes in WOB or PTP.
Eadi-optimized PSV allows improving patient ventilator interaction but does not alter patient effort in patients with mild asynchrony.
Clinicaltrials.gov identifier: NCT 02067403 . Registered 7 February 2014
Theoretical study of dislocation nucleation from simple surface defects in semiconductors
Large-scale atomistic calculations, using empirical potentials for modeling
semiconductors, have been performed on a stressed system with linear surface
defects like steps. Although the elastic limits of systems with surface defects
remain close to the theoretical strength, the results show that these defects
weaken the atomic structure, initializing plastic deformations, in particular
dislocations. The character of the dislocation nucleated can be predicted
considering both the resolved shear stress related to the applied stress
orientation and the Peierls stress. At low temperature, only glide events in
the shuffle set planes are observed. Then they progressively disappear and are
replaced by amorphization/melting zones at a temperature higher than 900 K
- âŠ