Design Space Pruning Techniques for Low-Thrust, Multiple Asteroid Rendezvous Trajectory Design

AAS/AIAA Astrodynamics Specialist Conference, August 2007, Mackinac Island, MI.In 2006, the 2nd Global Trajectory Optimization Competition (GTOC2) posed a “Grand Asteroid Tour” trajectory optimization problem, where participants were required to find the best possible low-thrust trajectory that would rendezvous with one asteroid from each of four defined groups. As a first step, most teams employed some form of design space pruning, in order to reduce the overall number of possible asteroid combinations. Because of the large size of the problem, teams were not able to determine if their pruning technique had successfully eliminated only bad solutions from the design space. Therefore, a small subset of the GTOC2 problem was analyzed, and several design space pruning techniques were applied to determine their effectiveness. The results indicate that the pruning techniques chosen by the participants likely eliminated good solutions from the design space, because they either did not accurately represent the low-thrust problem or could not be considered independently without the effect of other factors

NASA Langley Mars Science Laboratory (MSL) proposal development and science evaluation

Issued as final reportNational Institute of Aerospac

The effect of interplanetary trajectory options on a manned Mars aerobrake configuration

Manned Mars missions originating in low Earth orbit (LEO) in the time frame 2010 to 2025 were analyzed to identify preferred mission opportunities and their associated vehicle and trajectory characteristics. Interplanetary and Mars atmospheric trajectory options were examined under the constraints of an initial manned exploration scenario. Two chemically propelled vehicle options were considered: (1) an all propulsive configuration, and (2) a configuration which employs aerobraking at Earth and Mars with low lift/drag (L/D) shapes. Both the interplanetary trajectory options as well as the Mars atmospheric passage are addressed to provide a coupled trajectory simulation. Direct and Venus swingby interplanetary transfers with a 60 day Mars stopover are considered. The range and variation in both Earth and Mars entry velocity are also defined. Two promising mission strategies emerged from the study: (1) a 1.0 to 2.0 year Venus swingby mission, and (2) a 2.0 to 2.5 year direct mission. Through careful trajectory selection, 11 mission opportunities are identified in which the Mars entry velocity is between 6 and 10 km/sec and Earth entry velocity ranges from 11.5 to 12.5 km/sec. Simulation of the Earth return aerobraking maneuver is not performed. It is shown that a low L/D configuration is not feasible for Mars aerobraking without substantial improvements in the interplanetary navigation system. However, even with an advanced navigation system, entry corridor and aerothermal requirements restrict the number of potential mission opportunities. It is also shown that for a large blunt Mars aerobrake configuration, the effects of radiative heating can be significant at entry velocities as low as 6.2 km/sec and will grow to dominate the aerothermal environment at entry velocities above 8.5 km/sec. Despite the additional system complexity associated with an aerobraking vehicle, the use of aerobraking was shown to significantly lower the required initial LEO weight. In comparison with an all propulsive mission, savings between 19 and 59 percent were obtained depending upon launch date

Three-Dimensional Finite Element Ablative Thermal Response and Thermostructural Design of Thermal Protection Systems

A finite element ablation and thermal response program is presented for simulation of three-dimensional transient thermostructural analysis. The three-dimensional governing differential equations and finite element formulation are summarized. A novel probabilistic design methodology for thermal protection systems is presented. The design methodology is an eight step process beginning with a parameter sensitivity study and is followed by a deterministic analysis whereby an optimum design can determined. The design process concludes with a Monte Carlo simulation where the probabilities of exceeding design specifications are estimated. The design methodology is demonstrated by applying the methodology to the carbon phenolic compression pads of the Crew Exploration Vehicle. The maximum allowed values of bondline temperature and tensile stress are used as the design specifications in this study

Ablative Thermal Response Analysis Using the Finite Element Method

A review of the classic techniques used to solve ablative thermal response problems is presented. The advantages and disadvantages of both the finite element and finite difference methods are described. As a first step in developing a three dimensional finite element based ablative thermal response capability, a one dimensional computer tool has been developed. The finite element method is used to discretize the governing differential equations and Galerkin's method of weighted residuals is used to derive the element equations. A code to code comparison between the current 1-D tool and the 1-D Fully Implicit Ablation and Thermal Response Program (FIAT) has been performed

Low-thrust trajectory optimization tool to assess options for near-earth asteroid deflection

Issued as final reportSpaceworks Engineering Inc

Vacuum Infusion Process Development for Conformal Ablative Thermal Protection System Materials

Conformal ablators are low density composite materials comprised of a flexible carbon felt based fibrous substrate and a high surface area phenolic matrix. These materials are fabricated to near net shape by molding the substrate, placing in a rigid matched mold and infusing with liquid resin through a vacuum assisted process. The open mold process, originally developed for older rigid substrate ablators, such as PICA, wastes a substantial amount of resin. In this work, a vacuum infusion process a type of liquid composite molding where resin is directly injected into a closed mold under vacuum is advanced for conformal ablators. The process reduces waste over the state-of-the-art technique. Small, flat samples of Conformal Phenolic Impregnated Carbon Ablator are infused using the new approach and subjected to a range of curing configurations and conditions. Resulting materials are inspected for quality and compared to material produced using the standard process. Lessons learned inform subsequent plans for process scale up

Closing Intraschool Achievement Gaps: A Mixed Methods Pilot Study

This pilot project was designed to explore the degree to which educators closed identified intraschool achievement gaps (i.e. gaps occurring between sub-groups of students in the same school,), as well as to explore leaders, teachers, and staff perspectives on the ways their beliefs, assumptions and practices shifted while engaging in the effort to close the gaps

Transforming equity-oriented leaders: Principal residency network program evaluation

After 12 years focused on developing school leaders who act as change agents for educational equity, the Principal Residency Network (PRN) partnered with Johnson and Wales University’s Center for Research and Evaluation to conduct a utilization-focused (Patton, 2002) program evaluation funded by a grant from the Rhode Island Foundation. The PRN is a principal preparation program of the non-profit organization, the Center for Leadership and Educational Equity. This sequential explanatory mixed methods study explored PRN graduates’ outcomes and perceptions of the program, with an overarching purpose of creating a coherent data collection and inquiry process to be used by program staff on an ongoing basis. Following the development of an evaluation framework, Phase I of the study consisted of collecting assessment data and feedback from current PRN participants, as well as administering a survey questionnaire to recent graduates of the program (N=14), previously administered in 2005 (N=21) and 2009 (N=6). Phase II of this evaluation was designed to further explore recent graduates’ perceptions of the nature and relevancy of the program in developing their commitment and skill to lead for equity in order to recommend program improvements; N=7 participated in a 90 minute focus group. Findings indicated four conclusions from which recommendations were drawn: the program is achieving strong results, participants perceive the program to have an interconnected and coherent focus on preparing them to be equity-oriented leaders, the mentor is a critical component, and modeling the cycle of inquiry created through this evaluative study is importan

Definition ofthe Design Trajectory and Entry Flight Corridor for the NASA Orion Exploration Mission 1 Entry Trajectory Using an Integrated Approach and Optimization

One of the key design objectives of NASA's Orion Exploration Mission 1 (EM- 1) is to execute a guided entry trajectory demonstrating GN&C capability. The focus of this paper is defining the flyable entry corridor for EM-1 taking into account multiple subsystem constraints such as complex aerothermal heating constraints, aerothermal heating objectives, landing accuracy constraints, structural load limits, Human-System-Integration-Requirements, Service Module debris disposal limits and other flight test objectives. During the EM-1 Design Analysis Cycle 1 design challenges came up that made defining the flyable entry corridor for the EM-1 mission critical to mission success. This document details the optimization techniques that were explored to use with the 6-DOF ANTARES simulation to assist in defining the design entry interface state and entry corridor with respect to key flight test constraints and objectives