16 research outputs found
Das Normungs- und Standardisierungsumfeld von Cloud Computing : Eine Untersuchung aus europäischer und deutscher Sicht unter Einbeziehung des Technologieprogramms „Trusted Cloud“ ; Kurzfassung. Stand: Februar 2012
Darstellung des Standes und der Entwicklungsmöglichkeiten von Kernspaltungsreaktoren : Studie A.4.1.a, A.4.1.b und A.4.1.c
Die verschiedenen Anwendungsmöglichkeiten der Kernenergie sind die folgenden; sie sind - bis auf die Erzeugung von Strom - im wesentlichen nach der erforderlichen Temperatur der bei der Anwendung umgewandelten Wärmeenergie geordnet:
- Erzeugung von Strom
- Erzeugung von Fernwärme und Nahwärme
- Erzeugung von ProzeĂźdampf (und Injektionsdampf)
- Erzeugung von Fernenergie
- Umwandlung von Erdgas
- Veredlung fossiler Energieträger, insbesondere von Kohle
- Erzeugung von Wasserstoff (Elektrolyse und Thermolyse
Generation of an activation map for decommissioning planning of the Berlin Experimental Reactor-II
Simulation of irradiation exposure of electronic devices due to heavy ion therapy with Monte Carlo Code MCNP6
Generation of an activation map for decommissioning planning of the Berlin Experimental Reactor-II
The BER-II is an experimental facility with 10 MW that was operated since 1974. Its planned operation will end in 2019. To support the decommissioning planning, a map with the overall distribution of relevant radionuclides has to be created according to the state of the art. In this paper, a procedure to create these 3-d maps using a combination of MCNP and deterministic methods is presented. With this approach, an activation analysis is performed for the whole reactor geometry including the most remote parts of the concrete shielding
Generation of an activation map for decommissioning planning of the Berlin Experimental Reactor-II
The BER-II is an experimental facility with 10 MW that was operated since 1974. Its planned operation will end in 2019. To support the decommissioning planning, a map with the overall distribution of relevant radionuclides has to be created according to the state of the art. In this paper, a procedure to create these 3-d maps using a combination of MCNP and deterministic methods is presented. With this approach, an activation analysis is performed for the whole reactor geometry including the most remote parts of the concrete shielding
Scattering Laws and Cross Sections for Moderators and Structure Materials for Calculation of Production and Transport of Cold and Ultracold Neutrons
Simulation of irradiation exposure of electronic devices due to heavy ion therapy with Monte Carlo Code MCNP6
During heavy ion irradiation therapy the patient has to be located exactly at the right position to make sure that the Bragg peak occurs in the tumour. The patient has to be moved in the range of millimetres to scan the ill tissue. For that reason a special table was developed which allows exact positioning. The electronic control can be located outside the surgery. But that has some disadvantage for the construction. To keep the system compact it would be much more comfortable to put the electronic control inside the surgery. As a lot of high energetic secondary particles are produced during the therapy causing a high dose in the room it is important to find positions with low dose rates. Therefore, investigations are needed where the electronic devices should be located to obtain a minimum of radiation, help to prevent the failure of sensitive devices. The dose rate was calculated for carbon ions with different initial energy and protons over the entire therapy room with Monte Carlo particle tracking using MCNP6. The types of secondary particles were identified and the dose rate for a thin silicon layer and an electronic mixture material was determined. In addition, the shielding effect of several selected material layers was calculated using MCNP6
Simulation of irradiation exposure of electronic devices due to heavy ion therapy with Monte Carlo Code MCNP6
During heavy ion irradiation therapy the patient has to be located exactly at the right position to make sure that the Bragg peak occurs in the tumour. The patient has to be moved in the range of millimetres to scan the ill tissue. For that reason a special table was developed which allows exact positioning. The electronic control can be located outside the surgery. But that has some disadvantage for the construction. To keep the system compact it would be much more comfortable to put the electronic control inside the surgery. As a lot of high energetic secondary particles are produced during the therapy causing a high dose in the room it is important to find positions with low dose rates. Therefore, investigations are needed where the electronic devices should be located to obtain a minimum of radiation, help to prevent the failure of sensitive devices. The dose rate was calculated for carbon ions with different initial energy and protons over the entire therapy room with Monte Carlo particle tracking using MCNP6. The types of secondary particles were identified and the dose rate for a thin silicon layer and an electronic mixture material was determined. In addition, the shielding effect of several selected material layers was calculated using MCNP6