28 research outputs found
High-Level Heat Resistance of Spores of Bacillus amyloliquefaciens and Bacillus licheniformis Results from the Presence of a spoVA Operon in a Tn1546 Transposon
Bacterial endospore formers can produce spores that are resistant to many food processing conditions, including heat. Some spores may survive heating processes aimed at production of commercially sterile foods. Recently, it was shown that a spoVA operon, designated spoVA(2mob), present on a Tn1546 transposon in Bacillus subtilis, leads to profoundly increased wet heat resistance of B. subtilis spores. Such Tn1546 transposon elements including the spoVA(2mob) operon were also found in several strains of Bacillus amyloliquefaciens and Bacillus licheniformis, and these strains were shown to produce spores with significantly higher resistances to wet heat than their counterparts lacking this transposon. In this study, the locations and compositions of Tn1546 transposons encompassing the spoVA(2mob) operons in B. amyloliquefaciens and B. licheniformis were analyzed. Introduction of these spoVA(2mob) operons into B. subtilis 168 (producing spores that are not highly heat resistant) rendered mutant 168 strains that produced high-level heat resistant spores, demonstrating that these elements in B. amyloliquefaciens and B. licheniformis are responsible for high level heat resistance of spores. Assessment of growth of the nine strains of each species between 5.2°C and 57.7°C showed some differences between strains, especially at lower temperatures, but all strains were able to grow at 57.7°C. Strains of B. amyloliquefaciens and B. licheniformis that contain the Tn1546 elements (and produce high-level heat resistant spores) grew at temperatures similar to those of their Tn1546-negative counterparts that produce low-level heat resistant spores. The findings presented in this study allow for detection of B. amyloliquefaciens and B. licheniformis strains that produce highly heat resistant spores in the food chain
Draft Genome Sequences of Four Bacillus thermoamylovorans Strains Isolated from Milk and Acacia Gum, a Food Ingredient
The thermophilic bacterium Bacillus thermoamylovorans produces highly heat-resistant spores that can contaminate food products, leading to their spoilage. Here, we present the whole-genome sequences of four B. thermoamylovorans strains, isolated from milk and acacia gum
Next-Generation Whole-Genome Sequencing of Eight Strains of Bacillus cereus, Isolated from Food
Bacillus cereus can contaminate food and cause emetic and diarrheal foodborne illness. Here, we report whole-genome sequences of eight strains of B. cereus, isolated from different food sources
Draft Genome Sequences of Seven Thermophilic Spore-Forming Bacteria Isolated from Foods That Produce Highly Heat-Resistant Spores, Comprising Geobacillus spp., Caldibacillus debilis, and Anoxybacillus flavithermus
Here, we report the draft genomes of five strains of Geobacillus spp., one Caldibacillus debilis strain, and one draft genome of Anoxybacillus flavithermus, all thermophilic spore-forming Gram-positive bacteria
Recommended from our members
Characterization of a Listeria monocytogenes Scott A Isolate with High Tolerance towards High Hydrostatic Pressure
An isolate of L. monocytogenes Scott A that is tolerant to high hydrostatic pressure (HHP), named AK01, was isolated upon a single pressurization treatment of 400 MPa for 20 min and was further characterized. The survival of exponential- and stationary-phase cells of AK01 in ACES [N-(2-acetamido)-2-aminoethanesulfonic acid] buffer was at least 2 log units higher than that of the wild type over a broad range of pressures (150 to 500 MPa), while both strains showed higher HHP tolerance (piezotolerance) in the stationary than in the exponential phase of growth. In semiskim milk, exponential-phase cells of both strains showed lower reductions upon pressurization than in buffer, but again, AK01 was more piezotolerant than the wild type. The piezotolerance of AK01 was retained for at least 40 generations in rich medium, suggesting a stable phenotype. Interestingly, cells of AK01 lacked flagella, were elongated, and showed slightly lower maximum specific growth rates than the wild type at 8, 22, and 30°C. Moreover, the piezotolerant strain AK01 showed increased resistance to heat, acid, and H(2)O(2) compared with the wild type. The difference in HHP tolerance between the piezotolerant strain and the wild-type strain could not be attributed to differences in membrane fluidity, since strain AK01 and the wild type had identical in situ lipid melting curves as determined by Fourier transform infrared spectroscopy. The demonstrated occurrence of a piezotolerant isolate of L. monocytogenes underscores the need to further investigate the mechanisms underlying HHP resistance of food-borne microorganisms, which in turn will contribute to the appropriate design of safe, accurate, and feasible HHP treatments
Defining a rob Regulon in Escherichia coli by Using Transposon Mutagenesis
The Rob protein of Escherichia coli is a member of the AraC-XylS family of prokaryotic transcriptional regulators and is expressed constitutively. Deletion of the rob gene increases susceptibility to organic solvents, while overexpression of Rob increases tolerance to organic solvents and resistance to a variety of antibiotics and to the superoxide-generating compound phenazine methosulfate. To determine whether constitutive levels of Rob regulate basal gene expression, we performed a MudJ transposon screen in a rob deletion mutant containing a plasmid that allows for controlled rob gene expression. We identified eight genes and confirmed that seven are transcriptionally activated by normal expression of Rob from the chromosomal rob gene (inaA, marR, aslB, ybaO, mdlA, yfhD, and ybiS). One gene, galT, was repressed by Rob. We also demonstrated by Northern analysis that basal expression of micF is significantly higher in wild-type E. coli than in a rob deletion mutant. Rob binding to the promoter regions of most of these genes was substantiated in electrophoretic mobility shift assays. However, Mu insertions in individual Rob-regulated genes did not affect solvent sensitivity. This phenotype may depend on changes in the expression of several of these Rob-regulated genes or on other genes that were not identified. Rob clearly affects the basal expression of genes with a broad range of functions, including antibiotic resistance, acid adaptation, carbon metabolism, cell wall synthesis, central intermediary metabolism, and transport. The magnitudes of Rob's effects are modest, however, and the protein may thus play a role as a general transcription cofactor
Recommended from our members
Contingency locus in ctsR of Listeria monocytogenes Scott A: a strategy for occurrence of abundant piezotolerant isolates within clonal populations
In a recent study we demonstrated that a high-hydrostatic-pressure-tolerant isolate of Listeria monocytogenes
lacks a codon in the class 3 heat shock regulator gene ctsR. This mutation in the region that encodes four
consecutive glycines was directly responsible for the observed piezotolerance, increased stress resistance, and
reduced virulence. The aim of the present study was to determine whether mutations in ctsR are frequently
associated with piezotolerance in L. monocytogenes. Wild-type cultures of L. monocytogenes were therefore
exposed to 350 MPa for 20 min, and the piezotolerance of individual surviving isolates was assessed. This
rendered 33 isolates with a stable piezotolerant phenotype from a total of 84 survivors. Stable piezotolerant
mutants were estimated to be present in the initial wild-type population at frequencies of >10�5. Subsequent
sequencing of the ctsR gene of all stable piezotolerant isolates revealed that two-thirds of the strains (i.e., n �
21) had mutations in this gene. The majority of the mutations (16 of 21 strains) consisted of a triplet deletion
in the glycine-encoding region of ctsR, identical to what was found in our previous study. Interestingly, 2 of 21
mutants contained a codon insertion in this repeat region. The remaining three stable piezotolerant strains
showed a 19-bp insertion in the glycine repeat region, a 16-bp insertion downstream of the glycine repeat area
(both leading to frameshifts and a truncated ctsR), and an in-frame 114-bp deletion encoding a drastically
shortened carboxy terminus of CtsR. In four instances it was not possible to generate a PCR product. A
piezotolerant phenotype could not be linked to mutations in ctsR in 8 of 33 isolates, indicating that other
thus-far-unknown mechanisms also lead to stable piezotolerance. The present study highlights the importance
of ctsR in piezotolerance and stress tolerance of L. monocytogenes, and it demonstrates that short-sequence
repeat regions contribute significantly to the occurrence of a piezotolerant and stress-tolerant subpopulation
within L. monocytogenes cultures, thus playing an important role in survival
Two distinct groups within the Bacillus subtilis group display significantly different spore heat resistance properties
The survival of bacterial spores after heat treatment and the subsequent germination and outgrowth in a food product can lead to spoilage of the food product and economical losses. Prediction of time-temperature conditions that lead to sufficient inactivation requires access to detailed spore thermal inactivation kinetics of relevant model strains. In this study, the thermal inactivation kinetics of spores of fourteen strains belonging to the Bacillus subtilis group were determined in detail, using both batch heating in capillary tubes and continuous flow heating in a micro heater. The inactivation data were fitted using a log linear model. Based on the spore heat resistance data, two distinct groups (p <0.001) within the B. subtilis group could be identified. One group of strains had spores with an average D-120 (degrees C) of 0.33 s, while the spores of the other group displayed significantly higher heat resistances, with an average D-120 degrees C of 45.7 s. When comparing spore inactivation data obtained using batch-and continuous flow heating, the z-values were significantly different, hence extrapolation from one system to the other was not justified. This study clearly shows that heat resistances of spores from different strains in the B. subtilis group can vary greatly. Strains can be separated into two groups, to which different spore heat inactivation kinetics apply. (C) 2014 Elsevier Ltd. All rights reserved
Prediction and validation of novel SigB regulon members in Bacillus subtilis and regulon structure comparison to Bacillales members
Abstract Background Sigma factor B (SigB) is the central regulator of the general stress response in Bacillus subtilis and regulates a group of genes in response to various stressors, known as the SigB regulon members. Genes that are directly regulated by SigB contain a promotor binding motif (PBM) with a previously identified consensus sequence. Results In this study, refined SigB PBMs were derived and different spacer compositions and lengths (N12-N17) were taken into account. These were used to identify putative SigB-regulated genes in the B. subtilis genome, revealing 255 genes: 99 had been described in the literature and 156 genes were newly identified, increasing the number of SigB putative regulon members (with and without a SigB PBM) to > 500 in B. subtilis. The 255 genes were assigned to five categories (I-V) based on their similarity to the original SigB consensus sequences. The functionalities of selected representatives per category were assessed using promoter-reporter fusions in wt and ΔsigB mutants upon exposure to heat, ethanol, and salt stress. The activity of the P rsbV (I) positive control was induced upon exposure to all three stressors. P ytoQ (II) showed SigB-dependent activity only upon exposure to ethanol, whereas P pucI (II) with a N17 spacer and P ylaL (III) with a N16 spacer showed mild induction regardless of heat/ethanol/salt stress. P ywzA (III) and P yaaI (IV) displayed ethanol-specific SigB-dependent activities despite a lower-level conserved − 10 binding motif. P gtaB (V) was SigB-induced under ethanol and salt stress while lacking a conserved − 10 binding region. The activities of P ygaO and P ykaA (III) did not show evident changes under the conditions tested despite having a SigB PBM that highly resembled the consensus. The identified extended SigB regulon candidates in B. subtilis are mainly involved in coping with stress but are also engaged in other cellular processes. Orthologs of SigB regulon candidates with SigB PBMs were identified in other Bacillales genomes, but not all showed a SigB PBM. Additionally, genes involved in the integration of stress signals to activate SigB were predicted in these genomes, indicating that SigB signaling and regulon genes are species-specific. Conclusion The entire SigB regulatory network is sophisticated and not yet fully understood even for the well-characterized organism B. subtilis 168. Knowledge and information gained in this study can be used in further SigB studies to uncover a complete picture of the role of SigB in B. subtilis and other species