5 research outputs found

    Investigation of biotic and abiotic removal processes of bisphenol-a from wastewaters.

    No full text
    TEZ9273Tez (Doktora) -- Çukurova Üniversitesi, Adana, 2014.Kaynakça (s. 111-127) var.xi, 129 s. : res. (bzs. rnk.), tablo ; 29 cm.Bisfenol-A, halk sağlığına ve ekolojik çevreye olan olumsuz etkilerinden dolayı öncelikli endüstriyel kirleticiler sınıfına girmiştir. Bu çalışmada, Bisfenol-A’ nın (BFA) atıksulardan biyotik ve abiyotik yöntemler ile giderimi araştırılmıştır. Çalışma başlıca iki aşamada gerçekleştirilmiştir. Birinci aşamada BFA’nın aktif çamur biyokütlesi ve saf Pseudomonas aeruginosa biyokütlesi tarafından biyotik giderimi araştırılmıştır. İkinci aşamada BFA’nın aktif çamur biyokütlesi üzerine adsorpsiyonu araştırılmıştır. Çalışmalarda sıcaklık, biyokütle ve BFA konsantrasyonunun BFA giderimi üzerine etkisi araştırılmıştır. Deneysel bulgular, atıksulardan BFA gideriminde temel giderim mekanizmasının biyolojik parçalanma olduğunu ve giderim üzerine sıcaklığın, BFA ve biyokütle konsantrasyonunun etkili olduğunu göstermiştir. 3000 mg/L aktif çamur biyokütlesi uygulamasında, 10 mg/L BFA’nın 20 °C’de 180 dakikada tamamen giderildiği tespit edilmiştir. P. Aeruginosa uygulamasında, tek karbon kaynağı olarak 5 mg/L BFA kullanıldığında 15, 25 ve 35 °C sıcaklıklar için BFA’nın sırasıyla 8, 6 ve 4 günde tamamen giderildiği bulunmuştur. 30 mg/L BFA kullanımında ise 11. günde %76,6 oranında BFA’nın giderildiği tespit edilmiştir. Çalışmanın ikinci aşamasında aktif çamur biyokütlesinin BFA’yı adsorpsiyonla belirli bir miktar giderebildiği ve Langmuir izotermine göre 20 °C’de adsorpsiyon kapasitesinin 3,55 mg/g olduğu hesaplanmıştır. Çalışmalarda kullanılan istatistiksel metotlara göre p<0,05 önem değeri ile BFA’nın aktif çamur ile biyotik gideriminde sıcaklık, BFA ve biyokütle konsantrasyonunun etkisinin anlamlı olduğu bulunmuştur.Due to the adverse effects of Bisphenol-A (BPA) onto public health and ecological environment it becomes to be priority pollutant. In this study, removal of Bisphenol-A from wastewater by biotic and abiotic methods were investigated. The study was conducted in two main stages. In the first stage biotic removal of BPA by activated sludge biomass and pure Pseudomonas aeruginosa biomass were investigated. In the second stage the adsorption of BPA onto activated sludge biomass was investigated. In the studies effect of temperature, BPA and the biomass concentration on the removal of BPA were investigated. Experimental results showed that the main removal mechanism of BPA from wastewater was biodegradation and the effect of temperature, BPA and biomass concentrations were important for the removal of BPA. Using 3000 mg/L activated sludge biomass It was determined that 10 mg/L BPA completely removed at 20°C in 180 minutes. Using P. aeruginosa, 5 mg/L as a sole carbon source BPA was completely degradated at 15, 25 and 30 °C in 8, 6 and 4 days, respectively. It was also determined that using 30 mg/L BPA the degradation ratio was 76,6% in 11 days. At the second stage of the stduy, it was founded that activated sludge biomass removed BPA by adsorption at certain levels and adsorption capacity was 3,55 mg/g at 20 °C according to Langmuir isotherm. According to the statistical methods it was founded that the effect of temperature, BPA and biomass concentrations on biotic removal of BPA by activated sludge was significant with p<0,05 value.Bu çalışma Ç.Ü. Bilimsel Araştırma Projeleri Birimi tarafından desteklenmiştir. Proje No: MMF2010D4

    Atıksulardan tekstil boyar maddelerinin sürekli ve kesikli sistemlerde ağaç kabuğu (eucalyptus camaldulensis) kullanılarak adsorpsiyon ile giderrilmesi

    No full text
    TEZ6125Tez (Yüksek Lisans) -- Çukurova Üniversitesi, Adana, 2006.Kaynakça (s.66-73) var.x, 74 s. : rnk. ; 29 cm.In this study, the adsorption of synthetic textile dyes such as Basic Blue 41 (BB41) and Reactive Black 5 (RB5) on to Eucalyptus camaldulensis bark has been studied in batch and continue fixed bed column systems. Effects of initial dye concentreation, adsorbent particle size and pH have been investigated in batch studies. The constants of Langmuir and Freundlich adsorpiton isotherms have been determined using the adsorption data. Adsorption tests showed that adsorption of BB41 by Eucalyptus camaldulensis is more effective than the adsorption of RB5 dye Investigation of the effect of pH medium showed that adsorption was more effective in pH 2 for RB5 and pH 6 for BB41. The model that describes the adsorpiton kinetics bestly, was found as the pseudo second order model. A labarotary scale column, containing 1-2 mm diameter adsorbent particle size of Eucalyptus camaldulensis bark was used in fixed bed stuidies. Effects of bed depth and initial dye concentration have been investigated. The breakthrough data from column studies were described by Bohart-Adams model. According to the results of column studies the breakthrough volume at the breakthrough point (Ct/C0 = 0,1) was increased with the increasing of bed depth and decreased with the increasing of intial dye concentration.Bu çalışmada Basic Blue 41 (BB41) ve Reactive Black 5 (RB5) sentetik tekstil boyar maddelerinin kesikli ve sürekli sabit yataklı sistemlerde Eucalyptus camaldulensis kabuğu üzerine adsorpsiyonu çalışılmıştır. Kesikli sistem deneylerinde giriş konsantrasyonu, adsorbent tane boyutu ve pH etkisi araştırılmıştır. Elde edilen veriler ile Langmuir ve Freundlich İzotermlerinin katsayıları hesaplanmıştır. Yapılan çalışmada, okaliptüs kabuğunun BB41 boyar maddesini adsorplama yeteneğinin, RB5 boyar maddesini adsorplama yeteğine göre daha iyi olduğu bulunmuştur. Adsorpsiyon üzerinde pH değişimlerinin araştırılmasında, RB5 boyar maddesinin pH 2' de, BB41 boyar maddesinin ise pH 6'da maksimum adsorplandığı ortaya çıkmıştır. Yapılan çalışmada, adsorpsiyon kinetiğini en iyi açıklayan modelin yalancı ikinci derece izoterm modeli olduğu ortaya çıkmıştır. Sabit yataklı çalışmalarda 1-2 mm arası tane boyutunda, Eucalyptus camaldulensis kabuğu içeren labaratuvar ölçekli kolon kullanılmıştır. Çalışmada, kolon yatak derinliğinin ve kolona giriş konsantrasyonun adsorpsiyon üzerine etkisi araştırılmıştır. Kırılma eğirisi verileri Bohart-Adams modeline göre değerlendirilmiştir. Elde edilen sonuçlara göre kırılma noktasında (Ct/C0 = 0,1) giderilen su hacminin, yatak derinliğinin artması ile arttığı ve giriş konsantrasyonun artması ile azaldığı ortaya çıkmıştır.Bu çalışma Ç.Ü. Bilimsel Araştırma Projeleri Birimi Tarafından Desteklenmiştir. Proje No:MMF2006YL1

    Removal of Reactive Black 39 Dye from Distilled Water and Synthetic Wastewater by a Nano Adsorbent

    No full text
    Bu çalışmada yüzeyi nano manyetit ile kaplanmış Eucalyptus camaldulensis kabukları (NEK), bir tekstil boyar maddesi olan Reaktif Black 39"un (RB39) distile su ve sentetik atıksudan gideriminde düşük maliyetli bir adsorbent olarak kullanılmıştır. Adsorpsiyon üzerine temas zamanı, pH, sıcaklık NEK dozu ve başlangıç boyar madde konsantrasyonu gibi çeşitli parametrelerin etkisi araştırılmıştır. Çalışmalar NEK"in adsorpsiyon kapasitesinin başlangıç boyar madde konsantrasyonunun, pH"ın ve sıcaklığın artmasıyla arttığını, NEK dozunun artmasıyla azaldığını göstermiştir. 300 mg/L RB39"un 150 mL distile sudan yaklaşık %94 verimle giderilmesi için 0,2 g NEK yeterli olduğu tespit edilmiştir. Diğer taraftan 300 mg/L RB39"un sentetik atıksudan yaklaşık %92 verimle giderilmesi için 0,4 g NEK"in yeterli olduğu bulunmuştur. Freundlich izotermi (R2=0,993) adsorpsiyon sürecini Langmuir izotermine göre daha etkili bir şekilde açıklamıştır. Langmuir izotermi NEK"in maksimum adsorpsiyon kapasitesini 432,12 mg/g olarak tahmin etmiştirIn the present study, nano magnetite coated Eucalyptus camaldulensis barks (NEC) was used as a lowcost adsorbent for the removal of a textile dye Reactive Black 39 (RB39) from distilled water and synthetic wastewater. The effects of the various parameters, contact time, pH, temperature, NEC dosage and initial dye concentration on the adsorption were investigated. It was found that the adsorption capacity of NEC increases by increasing the RB39 concentration, pH and temperature and by decreasing the dosage of NEC. 0.2 g NEC was found to be sufficient for the removal of 300 mg/L RB39 from 150 mL distilled water with ?94 % removal efficiency. On the other hand 0.4 g NEC was found sufficient for the removal of RB39 from synthetic wastewater with ?92 % removal efficiency. The Freundlich isotherm model described the adsorption process more effectively (R2 = 0.993) than the Langmuir isotherm model. The Langmuir isotherm predicted a 432.12 mg/g maximum adsorption capacity of NE

    Investigation of Adsorption of Reactive Black 5 Dye onto Activated Carbon by Using Kinetic and Adsorption Models

    No full text
    Bu çalışmada Reaktif Black 5 (RB5) boyar maddesinin granül aktif karbon (GAK) üzerine kesikli deneyler ile adsorpsiyonu çalışılmıştır. Adsorpsiyon sürecini açıklayabilmek için iki ve ikiden fazla parametreli olmak üzere toplam 17 farklı izoterm modeli kullanılmıştır. İki parametreli modeller arasında 0,99?dan büyük regresyon katsayıları, heterojen yüzey adsorpsiyon süreçlerinin tanımlanmasında kullanılan Freundlich, Halsey ve Henderson izotermlerinden elde edilmiştir. Tüm adsorpsiyon izotermleri arasında en yüksek regresyon katsayısı (0,998) Fritz-Schlunder modelinden hesaplanmıştır. Langmuir izotermi GAK?ın maksimum adsorpsiyon kapasitesini 23,58 mg/g olarak tahmin etmiştir. Adsorpsiyon kinetiğini en iyi açıklayan modelin yalancı ikinci derece kinetik eşitliği olduğu bulunmuştur. Adsorpsiyon kinetiği üzerine GAK dozunun etkili olduğu tespit edilmiştir.In this study the adsorption of Reactive Black 5 (RB5) dye onto granulated activated carbon (GAC) has been studied in batch experiments. 17 different adsorption isotherms which have two and more than two parameters have been used to explain the adsorption process. Greater than 0.99 regression coefficients were obtained from Freundlich, Halsey and Henderson isotherms, defining adsorption of heterogeneous surfaces, among two parameters models. The highest regression coefficient (0,998) was obtained from four parameters Fritz–Schlunder model among all adsorption isotherms. Langmuir isotherm predicted 23.58 mg/g maximum adsorption of GAC. The model that best describes the adsorption kinetics was found as the pseudo second order model. It was determined that GAC dosage was effective on adsorption kinetic
    corecore