79 research outputs found
Generation of widely tunable picosecond pulses with large SMSR by externally injecting a gain-switched dual laser source
The authors demonstrate a procedure of generating picosecond optical pulses that are tunable over a wide wavelength range (65 nm) and have very high spectral purity side-mode suppression ratio [(SMSR)>60 dB]. The large tuning range is obtained by employing external injection into a gain-switched source containing two Fabry-Pe/spl acute/rot lasers. The use of a widely tunable Bragg grating at the output improves the SMSR such that it exceeds 60 dB over the entire tuning range
Numerical analysis of pulse pedestal and dynamic chirp formation on picosecond modelocked laser pulses after propagation through a semiconductor optical amplifier
A numerical analysis, based on a modified Schrodinger equation, of the formation of pulse pedestals and dynamic chirp formation on picosecond pulses after propagation through a semiconductor optical amplifier is presented. The numerical predictions are confirmed by an experiment that utilises the frequency resolved optical gating technique for the amplified pulse characterisation
80 Gb/s optimised pulse source using a gain-switched laser diode in conjunction with a nonlinearly chirped grating
The authors demonstrate the generation of transforms limited short optical pulses, which display excellent spectral and temporal qualities by employing a novel technology, based on an externally injected gain-switched laser in conjunction with a non-linearly chirped grating. Using this technique, 3.5 ps optical pulses, exhibiting a time bandwidth product of 0.45, are generated, which are suitable for use in high-speed 80 Gb/s OTDM communications systems
System-performance analysis of optimized gain-switched pulse source employed in 40-and 80-Gb/s OTDM systems
The development of ultrashort optical pulse sources, exhibiting excellent temporal and spectral profiles, will play a crucial role in the performance of future optical time division multiplexed (OTDM) systems. In this paper, we demonstrate the difference in performance in 40- and 80-Gb/s OTDM systems between optical pulse sources based on a gain-switched laser whose pulses are compressed by a nonlinearly and linearly chirped fiber Bragg grating. The results achieved show that nonlinear chirp in the wings of the pulse leads to temporal pedestals formed on either side of the pulse when using the linearly chirped grating, whereas with the nonlinearly chirped grating, pedestals are essentially eliminated. In an OTDM system, these pedestals cause coherent interaction between neighboring channels, resulting in intensity fluctuations that lead to a power penalty of 1.5 dB (40 Gb/s) and 3.5 dB (80 Gb/s) in comparison to the case where the nonlinearly chirped grating is used. Simulations carried out with the aid of Virtual Photonics Inc. verify the results achieved
Pulse source for 80 Gb/s systems using a gain-wwitched laser diode followed by a nonlinearly chirped grating
This work presents the generation of 3.5 ps pulses at a repetition rate of 10 GHz and the optimization of the pulse spectrum. The output pulses are near transform limited and have pulse pedestals that are virtually eliminated to 35 dB down from the peak of the pulse, thus providing a source suitable for use in 80 Gb/s OTDM systems
FROG characterisation of SOA-based wavelength conversion using XPM in conjunction with shifted filtering up to line rates of 80 GHz
The work we present here builds on recent work where we obtained 80 Gb/s error free performance using cross phase modulation (XPM) in an SOA in conjunction with a blue shifted bandpass filter. Here we present a detailed characterisation of this wavelength conversion scheme using a Frequency Resolved Optical Gating (FROG) measurement scheme for both red and blue shifted filtering. This type of characterisation has not been provided before to the best of our knowledge and is an important analysis firstly to achieve a full understanding of the gain and phase dynamics exploited by the wavelength conversion scheme presented and secondly to design a filter so that an optimum performance can be obtaine
Optimized pulse source employing an externally injected gain-switched laser diode in conjunction with a nonlinearly chirped grating
In this paper, we demonstrate the generation of transform-limited short optical pulses, which display excellent spectral and temporal qualities by employing a novel technology, based on an externally injected gain-switched laser in conjunction with a nonlinearly chirped grating. Using this technique, 3.5-ps optical pulses exhibiting a time-bandwidth product (TBP) of 0.45 are generated, which are suitable for use in high-speed 80 Gb/s optical time-division multiplexing (OTDM) communications systems. The numerical integration of a set of rate equations using suitable parameters for the devices used in the experiments were carried out to further confirm the feasibility of the proposed method for developing an optimized pulse source for high-speed photonic systems
Analysis of bit rate dependence up to 80 Gbit/s of a simple wavelength converter based on XPM in a SOA and a shifted filtering
This paper provides the analysis of wavelength converted pulses obtained with a simple semiconductor
optical amplifier (SOA)-based wavelength conversion scheme, which exploits cross phase modulation
(XPM) in an SOA in conjunction with shifted filtering. The analysis includes experimental measurements
of the back-to-back system performances as well as frequency-resolved optical gating (FROG) characterisations
of the wavelength converted pulses. These measurements are implemented at different bit rates
up to 80 Gbit/s and for both red and blue-shifted filtering, particularly showing different patterning effect
dependencies of red and blue-shifting techniques. This analysis is developed by the addition of a numerical
study which corroborates the experimental results. A further understanding of the different performances
of red and blue filtering techniques, presented in the literature, can thus be proposed. The
placement of the filter to undertake red-shifted filtering (RSF) allows us to achieve very short pulse
widths but high bit rate operation is limited by pattern effects. The blue-shifted filtering (BSF) technique
shows optimum performance as regards to patterning effects even if the wavelength converted pulses
can be larger
80-Gb/s OTDM system analysis of a vertical microcavity-based saturable absorber for the enhancement of pulse pedestal suppression
In future high-speed optical time-division-multiplexed (OTDM) systems, an important factor that needs to be considered for optical pulse generation schemes is the impact of pulse pedestals on the overall system performance. The results presented in this letter are two-fold; first, the impact due to the height of pulse pedestals in an 80-Gb/s OTDM system are established. Second, a solution is provided to overcome these high pedestal levels through the use of a vertical microcavity saturable absorber, which can significantly reduce the pulse pedestal level and give enhanced system performanc
Impact du décalage du filtre sur les performances d'un convertisseur en longueur d'onde à base de SOA et filtrage décalé
session 4 «SystÚmes et réseaux de télécommunications optiques » [S4O1]National audienceNous analysons l'efficacité d'un convertisseur en longueur d'onde composé simplement d'un amplificateur à semi-conducteurssuivi d'un filtre et qui n'inverse pas la polarité du signal entre entrée et la sortie. Pour cela des mesures de taux d'erreurs binaires ainsi que de profils temporels des impulsions de sortie via un FROG (Frequency Resolved Optical Gating) sont réalisées pour différents débits allant jusqu'à 80 Gbit/s
- âŠ