16 research outputs found
Sedimentary, geochemical and geophysical study of the Ecca group, Karoo supergroup and its hydrocarbon potential in the Eastern Cape Province, South Africa
The Ecca Group of Karoo Supergroup is a sedimentary rock sequence that deposited between the Late Carboniferous (Dwyka Group) and the Late Permian-Middle Triassic (Beaufort Group). The Ecca Group investigated in this study is situated in the Eastern Cape Province of South Africa and it comprises mainly of shales, mudstones, siltstones and sandstones. The Ecca Group sequence contains considerable carbon content and suitable thickness to make it an ideal target for shale gas exploration. Previous studies put more emphasis on the geology and stratigraphy of the Ecca Group, this study revised the stratigraphy, and put new insight on the petrography, depositional processes, sedimentary facies, provenance, paleoweathering, tectonic setting, subsidence rates and history, electrical resistivity, source rock characteristics and diagenesis of the potentially feasible sandstone and mudrock reservoir rocks of the Ecca Group. Based on the lithological features, sedimentary structures and facies characteristics, the stratigraphy of the Prince Albert, Whitehill, Collingham and Fort Brown Formations of the Ecca Group is now subdivided into two informal members each, i.e. Lower Member and Upper Member. Furthermore, the Ripon Formation is now subdivided into three informal members. Each member has been asigned a lithological name. The grain size parameters show that most of the Ecca Group sandstones are very fine to fine grained, poorly to moderately well sorted, mostly near-symmetrical and mesokurtic in grain-size distribution. The linear discriminant function analysis is dominantly indicative of turbidity current deposits under deep marine environment for Prince Albert, Whitehill and Collingham Formations, shallow marine environment for Ripon Formation, while the Fort Brown Formation is lacustrine-deltaic deposits. Modal composition analysis and petrography studies revealed that the detrital components of the sandstones are dominated by monocrystalline quartz, feldspar and lithic fragments. The sandstones are compositionally and texturally immature and can be classified as feldspathic wacke and lithic wacke. The provenance analysis revealed plutonic and metamorphic terrains as the main source rocks with minor debris derived from recycled sedimentary rocks. The detrital modal compositions of these sandstones are related to back arc to island and continental margin of tectonic setting. Based on the detailed sedimentological analyses of outcrop and borehole data, fourteen lithofacies were identified and seven facies associations (FAs) were recognised. The facies associations are: FA 1: Shale and mudstones intercalated with siltstones, FA 2: Carbonaceous shale, mudstone with subordinate chert and sandstone, FA 3: Mudstones rhythmite with thin bedded mudstone and lenticular siltstone, FA 4: Greyish medium bedded sandstone intercalated with laminated mudstone, FA 5: Dark-grey medium to thick bedded mudstone and siltstone, FA 6: Thin to medium bedded sandstone alternated with thin bedded carbonaceous mudstone, and FA 7: Varved mudstone rhythmite intercalated with siltstone and minor sandstone. Sedimentological characteristics of the identified facies associations indicate four deposition environments, namely, deep marine basin, turbidite, shallow marine and lacustrine environments, which constitute a gradually regression sequence as a result of sea-level dropping and shallowing of the basin during the developmental processes. Geochemical analysis of the Ecca mudrocks and sandstones revealed that the rocks are of quartzose sedimentary provenance, suggesting that they were derived from a cratonic interior or recycled orogen. The petrography and geochemistry of the sandstones indicated that the source areas are composed of plutonic and metamorphic rocks with a minor component from sedimentary rocks. The geochemical diagrams and indices of weathering suggested that the granitic source rocks underwent moderate to high degree of chemical weathering. The tectonic setting discrimination diagrams support passive continental margin setting of the provenance
Geological and geophysical investigation of the South Eastern Karoo Basin, South Africa
Geological and geophysical methods were used to investigate the southeastern Karoo Basin of South Africa in an area extending from longitudes 24 o E to 29o E and latitudes 32o S to 35o S. This was undertaken in order to reveal geologic structures, isochore thicknesses of the geologic sequence and their variations across the study area, proffer the possible provenance of the sediments and assess the potential of oil and gas accumulation. The methodology used includes field investigation, rock sampling, preparation of thin sections, petrographic studies, X-ray diffraction analysis, density measurements, porosity calculations, extraction of elevation data from Google Earth, 2½ D gravity profile modelling, generating of isochore (true vertical) thicknesses and depositional surfaces maps from the models, PetroMod 1D modelling and qualitative interpretation of magnetic, gravity and radiometric maps.Petrographic study was carried out on twenty six thin sections of rocks from the eleven geologic formations that cover the study area. Petrographic studies on the diamictite of the Dwyka Group shows abundance of monocrystalline quartz, granite and quartzite components in the breccias which possibly indicate the existence of granitic and metamorphic rocks in the source areas. The sandstones of the Ecca and Beaufort Groups are immature, greywacke and the heavy mineral assemblages signify that the minerals are of granitic, volcanic and metamorphic origin. The magnetic maps show two main magnetic anomalies, a major one trending in a northeast to southwest direction which is part of the Beattie magnetic anomaly and another that is a âbean-shapedâ anomaly. The radially averaged power spectrum shows two depths to magnetic sources. The first depth is about 0.6 km which is the average depth to the top of the shallow sources, while the average depth to the top of the deep sources is about 15 km. The shallow sources are connected to magnetic minerals within the Beaufort Group while deep magnetic sources were inferred to be in the basement. The gamma ray spectrometric map shows areas with relatively high gamma radiation count. The high radiation count is possibly due to the uranium and thorium in the detrital materials, as well as the enrichment of radioelements in the feldspars (k-feldspar), calcite, quartz, zircon and clay minerals in the fluvial channel sandstones of the Beaufort Group. A total of two hundred and fifty-eight (258) rock samples were collected in the field and densities (dry, wet and grain densities) and porosities were determined in the laboratory. The Karoo Supergroup density values range from 2.526 â 2.828 g/cm3. The average porosities range from 0. 49 â 3.31 %. The dry densities and porosities of all the formations are inversely correlated with correlation coefficient values (R) that range from 0.9491 - 0.9982. The density of the dolerite intrusions (mostly sill) ranges from 2.700 â 2.837 g/cm3 whilst the porosity range from 0.1118 â 0.3868 %. The Bouguer anomaly map shows an increase in gravity values from -140.7 mGal in inland to about 60.1 mGal in coastal areas. This dominant gravity variation is inferred to be due to a deeper basement and/or Moho that get shallower from inland towards the coast. The Moho is at about 45 km depth inland and shallows to about 42 km at the coast. The 2½ D gravity modelling was done for fourteen (14) profiles with each profile having three (3) models corresponding to minimum, average and maximum densities to obtain the thicknesses of the geologic sequence. The current isochore thicknesses extracted from the gravity models show that the Beaufort Group is the thickest of all the groups that make up the Karoo Supergroup with maximum vertical thickness of up to 634 m, followed by the Ecca and Dwyka Groups with maximum vertical thicknesses of about 3207 m and 727 m, respectively. The maximum elevation for the Dwyka, Ecca and Beaufort sediments are about 500 m, 400 m and 285 m, respectively, whilst the maximum depth below sea level are around 8500 m, 7000 m and 5500 m, respectively. The PetroMod1D model result yield average vitrinite reflectance and temperature values of about 6 % and 500 â respectively for the lower Ecca Group which belong to the dry gas window based on classification by several authors. Thus the rocks of the lower Ecca Group are thermally matured for hydrocarbon (shale gas) generation that can merit gas exploration in the Karoo Basin
Textural characteristics, mode of transportation and depositional environment of the Stormberg Group in the Eastern Cape, South Africa: evidence from grain size and lithofacies analyses
The Stormberg Group comprises the Molteno, Elliot and Clarens formations and is one of four stratigraphical groups that make up the Karoo Supergroup in South Africa. The group is the highest unit in the Karoo Basin, representing the final phase of preserved sedimentation. The major problem with the Stromberg Group is that the mode of transport, hydrodynamic energy conditions and depositional environment are still poorly understood. For the present paper, grain size and lithofacies studies on selected sandstones from the Molteno, Elliot and Clarens formations were performed so as to elucidate their textural characteristics, depositional processes, sedimentation mechanisms and hydrodynamic energy conditions and to discriminate different depositional environments. The statistical parameters of grain size distribution (mean grain size, standard deviation, skewness and kurtosis) show that the sandstones are predominantly unimodal, fine grained, moderately well sorted, mesokurtic and near symmetrical. The bivariate diagrams of the aforementioned statistical parameters demonstrate that river and aeolian dune had the greatest impact on the depositional environments. Likewise, the C-M pattern (Passega diagram) shows that the sandstones were mostly deposited through tractive current process. Furthermore, the C-M diagram reveals the prevalence of rolling, suspension and graded suspension modes of sediment transportation. Seventeen sedimentary lithofacies were identified and grouped into seven lithofacies associations. These lithofacies associations indicate braided channel, overbank and swamp deposits for the Molteno Formation, alluvial fan/floodplain and playa deposits for the Elliot Formation and aeolian deposits for the Clarens Formation
Textural characteristics, mode of transportation and depositional environment of the Cretaceous sandstone in the Bredasdorp Basin, off the south coast of South Africa: Evidence from grain size analysis
A total of 92 representative sandstone samples of the Bredasdorp Basin in boreholes E-AH1, E-AJ1, E-BA1, E-BB1 and E-D3 have been investigated for their grain size characteristics. Grain size textural parameters and their cross plots, linear discriminate functions (LDFs), CâM (C = first percentile and M = median) diagram and logâprobability plots were calculated and interpreted to understand the mode of transportation and hydrodynamic conditions and also to unravel the depositional environments of the sediments. The grain size textural parameters revealed that the Bredasdorp sandstones are unimodal, predominantly fine-grained, moderately well-sorted, mesokurtic and near symmetrical. The bivariate plots of grain size textural parameters indicate that the depositional environments had been influenced mainly by river/beach/coastal dune conditions. The LDF plots show that the sediments are turbidity current deposits in a shallow marine environment. The CâM diagram revealed that the studied sandstones were mainly deposited by traction currents and beach process. In addition, the grain size logâprobability curves and CâM diagram show the predominance of suspension and saltation modes of sediment transportation. Based on the inter-relationship of the various statistical parameters, it is deduced that the Bredasdorp Basin are mainly shallow marine deposits with signature of beach and coastal river processes
Maceral Types and Quality of Coal in the Tuli Coalfield: A Case Study of Coal in the Madzaringwe Formation in the Vele Colliery, Limpopo Province, South Africa
The Madzaringwe Formation in the Vele colliery is one of the coal-bearing Late Palaeozoic units of the Karoo Supergroup, consisting of shale with thin coal seams and sandstones. Maceral group analysis was conducted on seven representative coal samples collected from three existing boreholesâOV125149, OV125156, and OV125160âin the Vele colliery to determine the coal rank and other intrinsic characteristics of the coal. The petrographic characterization revealed that vitrinite is the dominant maceral group in the coals, representing up to 81â92 vol.% (mmf) of the total sample. Collotellinite is the dominant vitrinite maceral, with a total count varying between 52.4 vol.% (mmf) and 74.9 vol.% (mmf), followed by corpogelinite, collodetrinite, tellinite, and pseudovitrinite with a count ranging between 0.8 and 19.4 vol.% (mmf), 1.5 and 17.5 vol.% (mmf), 0.8 and 6.5 vol.% (mmf) and 0.3 and 5.9 vol.% (mmf), respectively. The dominance of collotellinite gives a clear indication that the coals are derived from the parenchymatous and woody tissues of roots, stems, and leaves. The mean random vitrinite reflectance values range between 0.75% and 0.76%, placing the coals in the medium rank category (also known as the high volatile bituminous coal) based on the Coal Classification of the Economic Commission for Europe (UN-ECE) coal classification scheme. The inertinite content is low, ranging between 4 and 16 vol.% (mmf), and it is dominated by fusinite with count of about 1â7 vol.% (mmf). The high amount of inertinite, especially fusinite, with empty cells and semi-fusinite in the coals will pose a threat to coal mining because it aids the formation of dust
Geochemical and Petrographical Characteristics of the Madzaringwe Formation Coal, Mudrocks and Sandstones in the Vele Colliery, Limpopo Province, South Africa: Implications for Tectonic Setting, Provenance and Paleoweathering
The sedimentary rocks of the Madzaringwe Formation in the Tuli Basin have been investigated using geochemical and petrographic methods to reveal their source area composition, tectonic setting, provenance and paleoweathering conditions. The petrographic studies show that the rocks consist mostly of clay minerals and quartz. The major elements geochemistry indicates that the rocks of the Madzaringwe Formation have the same source area. Based on the discriminant function plots, it can be inferred that the rocks are of quartzose sedimentary provenance, suggesting that they were derived from a cratonic interior or recycled orogen. The binary plots of TiO2 versus Zr and La/Sr against Th/Co shows that the rocks were derived from silicic or felsic igneous rocks. The tectonic setting discrimination diagrams of SiO2 against Log (K2O/Na2O), ThâScâZr/10, and TiO2 versus (Fe2O3 + MgO) support passive-active continental margin settings of the provenance. The AâCNâK (Al2O3âCaO + Na2OâK2O) ternary diagram and binary plot of the index of compositional variability (ICV) against chemical index of alteration (CIA) shows that the rocks have been subjected to moderate to intensive weathering. Geochemical and petrographic characteristics of the rocks point to uplifted basement source areas predominantly composed of sedimentary rocks and/or granite-gneiss rocks. These source areas might have been from adjacent areas near the Tuli coalfield which include the Limpopo Belt (igneous and sedimentary rocks), and basement uplifted rocks of the Beit-Bridge Complex, consisting of the granite, granite-gneisses and schists
Geochemistry of sandstones and shales from the Ecca Group, Karoo Supergroup, in the Eastern Cape Province of South Africa: Implications for provenance, weathering and tectonic setting
Geochemical compositions of twenty-four sandstone and shale samples from the Ecca Group were analysed to decipher their provenance, paleoweathering conditions and tectonic setting. The shales have high Fe2O3, K2O, TiO2, Ce, Cu, Ga, La, Nb, Nd, Rb, Sc, Sr, Th and Y content more than the sandstones, whereas, sandstones are higher in SiO2, Hf and Zr than the shales. The positive correlations of Al2O3 with other elements as well as the abundance of Ba, Ce, Th, Rb, Zn and Zr suggest that these elements are primarily controlled by the dominant clay minerals. Tectonic discrimination diagrams revealed that the sandstones and shales are mostly of quartzose sedimentary provenance, suggesting that they were derived from a cratonic interior or recycled orogen. The binary plots of TiO2 versus Ni, TiO2 against Zr and La/Th versus Hf as well as the ternary diagrams of V-Ni-Th*10 indicate that the shales and sandstones were derived from felsic igneous rocks. A-CN-K (Al2O3-CaO-K2O) ternary diagram and indices of weathering (CIA, CIW and PIS) suggest that the granitic source rocks underwent moderate to high degree of chemical weathering. The CIA values range between 24.41% and 83.76%, indicating low to high weathering conditions. The CIW values for the studied sandstones and shales range from 25.90 to 96.25%, suggesting moderate to high intensive chemical weathering. ICV values for the sandstones and shales vary from 0.71 to 3.6 (averaging 1.20) and 0.41 to 1.05 (averaging 0.82), respectively. The k2O/Na2O ratios for the studied samples vary from 0.71 to 8.29, which reveal moderate to high maturity. The plot of CIA against ICV shows that most of the shales are geochemically mature and were derived from both weak and intensively weathered source rocks. The tectonic setting discrimination diagrams support passive-active continental margin setting of the provenance
Petrographical and geophysical investigation of the Ecca Group between Fort Beaufort and Grahamstown, in the Eastern Cape Province, South Africa
The outcrop of the Ecca Group in the Eastern Cape Province was investigated in order to reveal petrographic and geophysical characteristics of the formations that make up the group which are vital information when considering fracking of the Karoo for shale gas. The petrographic study reveals that the rocks of the Ecca Group are both argillaceous and arenaceous rock with quartz, feldspar, micas and lithics as the framework minerals. The sandstones are graywackes, immature and poorly sorted, thus giving an indication that the source area is near. The observed heavy minerals aswell as the lithic grains signify that the minerals are of granitic, volcanic and metamorphic origin. The porosity result shows that of all the formations that make up the Ecca Group, the Whitehill Formation is the most porous with an average porosity of about 2.1% and also least dense with an average dry density of about 2.5 g/cm3. The least porous unit is the Ripon Formation with porosity of about 0.8% but has the highest dry density of approximately 2.8 g/cm3. The magnetic map shows some ring-like structures which coincide with dolerites that were mapped in the field. As revealed by the depth slices result, dolerite intrusions are pervasive in the northern part of the study area, extending to a depth of about 6000 m below the ground surface. The appearance of dolerite intrusions at the targeted depth (3000 - 5000 m) for gas exploration could pose a serious threat to fracking of the Karoo for shale gas
Geochemical Evaluation of the Cretaceous Mudrocks and Sandstones (Wackes) in the Southern Bredasdorp Basin, Offshore South Africa: Implications for Hydrocarbon Potential
The southern Bredasdorp Basin, off the south coast of South Africa, is only partly understood in terms of its hydrocarbon potential when compared to the central and northern parts of the basin. Hydrocarbon potential assessments in this part of the basin have been limited, perhaps because the few drilled exploration wells were unproductive for hydrocarbons, yielding trivial oil and gas. The partial integration of data in the southern Bredasdorp Basin provides another reason for the unsuccessful oil and gas exploration. In this study, selected Cretaceous mudrocks and sandstones (wacke) from exploration wells E-AH1, E-AJ1, E-BA1, E-BB1 and E-D3 drilled in the southern part of the Bredasdorp Basin were examined to assess their total organic carbon (TOC), thermal maturity, organic matter type and hydrocarbon generation potential. The organic geochemical results show that these rocks have TOC contents ranging from 0.14 to 7.03 wt.%. The hydrogen index (HI), oxygen index (OI), and hydrocarbon index (S2/S3) values vary between 24–263 mg HC/g TOC, 4–78 mg CO2/g TOC, and 0.01–18 mgHC/mgCO2 TOC, respectively, indicating predominantly Type III and IV kerogen with a minor amount of mixed Type II/III kerogen. The mean vitrinite reflectance values vary from 0.60–1.20%, indicating that the samples are in the oil-generation window. The Tmax and PI values are consistent with the mean vitrinite reflectance values, indicating that the Bredasdorp source rocks have entered the oil window and are considered as effective source rocks in the Bredasdorp Basin. The hydrocarbon genetic potential (SP), normalized oil content (NOC) and production index (PI) values all indicate poor to fair hydrocarbon generative potential. Based on the geochemical data, it can be inferred that most of the mudrocks and sandstones (wackes) in the southern part of the Bredasdorp Basin have attained sufficient burial depth and thermal maturity for oil and gas generation potential
Grain size statistics and depositional pattern of the Ecca Group sandstones, Karoo Supergroup in the Eastern Cape Province, South Africa
Grain size analysis is a vital sedimentological tool used to unravel the hydrodynamic conditions, mode of transportation and deposition of detrital sediments. In this study, detailed grain-size analysis was carried out on thirty-five sandstone samples from the Ecca Group in the Eastern Cape Province of South Africa. Grain-size statistical parameters, bivariate analysis, linear discriminate functions, Passega diagrams and log-probability curves were used to reveal the depositional processes, sedimentation mechanisms, hydrodynamic energy conditions and to discriminate different depositional environments. The grain-size parameters show that most of the sandstones are very fine to fine grained, moderately well sorted, mostly near-symmetrical and mesokurtic in nature. The abundance of very fine to fine grained sandstones indicate the dominance of low energy environment. The bivariate plots show that the samples are mostly grouped, except for the Prince Albert samples that show scattered trend, which is due to the either mixture of two modes in equal proportion in bimodal sediments or good sorting in unimodal sediments. The linear discriminant function analysis is dominantly indicative of turbidity current deposits under shallow marine environments for samples from the Prince Albert, Collingham and Ripon Formations, while those samples from the Fort Brown Formation are lacustrine or deltaic deposits. The C-M plots indicated that the sediments were deposited mainly by suspension and saltation, and graded suspension. Visher diagrams show that saltation is the major process of transportation, followed by suspension