26 research outputs found

    A hybrid generalised linear and Levenberg-Marquardt artificial neural network approach for downscaling future rainfall in North Western England

    Get PDF
    This paper describes a novel technique for downscaling daily rainfall which uses a combination of a generalised linear model (GLM) and artificial neural network (ANN) to downscale rainfall. A two-stage process is applied, an occurrence process which uses the GLM model and an amount process which uses an ANN model trained with a Levenberg–Marquardt approach. The GLM-ANN was compared with other three downscaling models, the traditional neural network (ANN), multiple linear regression (MLR) and Poisson regression (PR). The models are applied for downscaling daily rainfall at three locations in the North West of England during the winter and summer. Model performances with respect to reproduction of various statistics such as correlation coefficient, autocorrelation, root mean square errors (RMSE), standard deviation and the mean rainfall are examined. It is found that the GLM-ANN model performs better than the other three models in reproducing most daily rainfall statistics, with slight difficulties in predicting extremes rainfall event in summer. The GLM-ANN model is then used to project future rainfall at the three locations employing three different general circulation models (GCMs) for SRES scenarios A2 and B2. The study projects significant increases in mean daily rainfall at most locations for winter and decreases in summe

    Application of the stochastic model for temporal rainfall disaggregation for hydrological studies in north western England

    Get PDF
    Assessment of climate change on any hydrological system requires higher temporal resolution at hourly or less in terms of time-scale. This paper implements the Bartlett-Lewis Rectangular Pulses (BLRP) model coupled with a proportional adjusting procedure to disaggregate daily rainfall to hourly rainfall in order to demonstrate the reliability of this method. Three stations in NorthWestern England have been selected that represent different climates in the region. Parameters estimation of the BLRP model has been performed under different levels of hourly rainfall aggregation for a combination of rainfall statistics. The Hyetos model, which applies BLRP, reproduced standard statistics such as mean, variance, Lag -1, autocorrelation as well as dry proportions. Moreover, the model was proven to have the capability to disaggregate the rainfall extremes. The fitted BLRP model could then be used to disaggregate future daily rainfall in order to investigate the climate change impact of different rainfall intensities

    “Simulation of Soil Pile Interaction of Steel Batter Piles Penetrated in Sandy Soil subjected to Pull-out Loads”

    Get PDF
    Super structures like offshore platforms, tall buildings, transition towers, skyscrapers and bridges are normally designed to resist compression, uplift and lateral forces from wind waves, negative skin friction, ship impact and other applied loads. Better understanding and the precise simulation of the response of batter piles under the action of independent uplift loads is a vital topic and an area of active research in the field of geotechnical engineering. This paper investigates the use of finite element code (FEC) to examine the behaviour of model batter piles penetrated in dense sand, subjected to pull-out pressure by means of numerical modelling. The concept of the Winkler Model (beam on elastic foundation) has been used in which the interaction between the pile embedded depth and adjacent soil in the bearing zone is simulated by nonlinea

    Application of the UKCP09 WG Outputs to Assess Performance of Combined Sewers System in a Changing Climate

    Get PDF
    In many parts of the world old sewer systems have been designed without consideration for change in climate, so probabilities and risks of sewer surcharge and flooding are elevated due to increase in extreme rainfall events as a consequence of global warming. The current paper is aiming to assess how the climate change on interannual to multidecadal timescale (2020s, 2050s, 2080s) will affect design standards of waste water networks due to the presumed increase in rainfall intensity and frequency in the Northwest of England area (selected site). Design storms have been analysed for future rainfall obtained from the UK Climate Projection version 2009 (UKCP09) weather generator, which was applied to the existing urban drainage system to check the level of service in winter and summer seasons. Two emission scenarios (SRES) have been adopted to simulate the greenhouse gas concentration; high scenario (A1FI) and low scenario (B1). Results indicate that the impact of increase in the deign storm of the system in winter lead to a potential of increase flood volume from manholes and intern basements at risk of flooding with the worst condition associated with 24 hours storm in 2080s. Moreover, when this design storm depth increased by only 15%, the corresponding flood volume increase by 40%, this indicates that the relation between the cause of flooding and its consequences is non-linear. Summer season has an opposite picture and flood volume is projected to decrease with the increase in the storm duration causing low risk. Considering climate change in this study caused most of urban drainage models runs to be very slow with some interruption in the simulation due to the inflation in some parameters, so cautious should be taken

    Improving the geometry of manholes designed for separate sewer systems

    Get PDF
    The design of manholes dates back more than 100 years. However, there have been developments such as the use of new materials for the manufacture of manholes, and advances in inspection and maintenance technologies, allowing improvements to the shape of manholes. This paper presents an innovative design for manholes, created to overcome the challenges associated with the installation of separate sewer systems in narrow streets, common to both UK and EU cities. The traditional separate sewer system has two separate manholes. The proposed manhole combines these two manholes into one structure, with two separate chambers, to allow storm flow and foul flow to pass through the same manhole without mixing. The structural performance of the new design has been tested using mathematical modelling validated by experimental tests. The results are compared with the structural performance of traditional manholes. The new design shows an improved resistance to high live loads

    “Analysis of The Lateral Response of A Reinforced Concrete Pile Penetrated In Sand Soil Using Finite Element”

    Get PDF
    Pile foundations are slender elements, underneath a major structure, frequently used for many decades as load carrying and load transferring systems from shallow inadequate subsurface soil layers to deep and stiff bearing strata with high degree of efficiency. Moreover, the laterally loaded response of concrete reinforced piles penetrated in sandy soil is normally analysed using Winkler Model (beam on elastic foundation), in which the sand-pile-sand interaction is simulated by highly nonlinear p–y curves. The present study presents the result of numerical analyses of the behaviour of reinforced concrete squared model piles (400 mm in diameter) with embedment depth-to-diameter ratio (L/d) of (20)penetrated in a calibrated chamber of pre prepared dense sand relative density

    Investigation of the structural performance of two flexible pipes set in one trench with a new placement method for separate sewer systems

    Get PDF
    Substantial research has been conducted on single flexible pipes buried in a trench. In contrast, the objective of this study is to determine the structural performance of two buried flexible sewer pipes positioned one over the other in a single trench. An innovative configuration is designed, based around the use of an innovative manhole structure which can accommodate both foul and surface water, to solve the challenges associated with constructing separate sewer systems in narrow streets while providing additional space for other infrastructure services. The behaviours of the two flexible pipes were tested using a 3D finite element (FE) model validated with experimental data from a laboratory investigation. A modified Drucker–Prager cap soil constitutive model was used to simulate the elasto-plastic soil behaviour. The results show that this approach comprising the use of a large-diameter flexible pipe set above a small-diameter flexible pipe mitigates the strain on the smaller pipe and decreases the total deflections of both pipes and the soil

    Experimental data used to validate the FE model of the structural performance of two flexible pipes laid in a single trench.

    Get PDF
    The objective of the article is to describe the methodology followed to validate the finite element model for the new method of setting pipes in a separate sewer system, using one trench to accommodate the storm pipe over the sanitary pipe "doi.org/10.1016/j.tust.2019.103019" (Abbas et al., 2019). A physical model was established in the Liverpool John Moores University (LJMU) lab to test the structural performance of two PVC pipes buried in one trench. The results of the physical model were used to validate an FE model using the same material properties and boundary conditions used in the physical model. The validation process allowed the FE model to be upgraded to a 3D FE full-scale model for testing the novel method used to place the separate sewer system

    Assessment of Water Harvesting System for a Smart Building Considering Climate Change

    Get PDF
    With climate change now a reality rather than speculated possibility, the future change of rainfall pattern will affect the demand for potable water. Forth coming regulatory changes will mean that over 90% of UK homes will have their water usage metered, making consumers more and more aware of how expensive the commodity of "common or garden" water has become. In this paper the design of different rainwater harvesting systems (RWH) is evaluated for three residential properties of different roof areas. The design considered climate change effect and change in future rainfall for three periods 2020s, 2050s and 2080s under the high (AIFI) and low (B1) SRES scenarios in NW of England. The RWH systems were shown to fulfill between 25% and 85% of WC, washing machine and outdoor use demand making the system more valuable as a sustainable solution

    Real-time non-destructive microwave sensor for nutrient monitoring in wastewater treatment

    Get PDF
    A real-time non intrusive microwave sensor system able to monitor the nutrients found in wastewater has been designed, simulated and implemented. These liquids are continuously flowing through a PTFE pipe and the properties of these liquids gradually degraded in time. Microwaves have the ability to give real-time changes in any material permittivity by means of changing the velocity of the signal, attenuating or reflecting it. The primarily measurements show promising results for future sensor developments which lead to a novel system that can be used in wastewater treatment plants
    corecore