Knowledge, attitudes, and practices (KAPs) of farmers on foot and mouth disease in cattle in Baghlan Province, Afghanistan: A descriptive study

This study was performed to investigate the knowledge, attitudes, and practices (KAPs) of farmers, animal traders, and veterinary professionals on FMD in Baghlan province, Afghanistan. Four structured questionnaires were administered to the respondents. Almost half (48.5%) of the farmers had heard of the occurrence of FMD in their neighbourhood or knew the name of the disease. The majority of farmers could recognise the clinical signs of FMD in their animals (salivation, 85.9%; tongue ulcers, 78.8%; gum lesions, 78.2%; hoof lesions, 76.8%). Most farmers stated that the “introduction of new animals” was the primary cause of FMD appearing on their farms and to control the spread of the disease, over half of the farmers (56%) preferred not to buy cattle from unknown or potentially infected sources. Animal traders’ knowledge was limited to recognising some clinical signs of the disease such as: salivation, and lesions in the mouth and on the feet. No animals were directly imported by the traders from outside Afghanistan. Over half of the local veterinary professionals (65%) kept record books of the animal diseases seen and/or treatment plans undertaken, and 80% of them reported the occurrence of FMD to the provincial, regional, and central veterinary authorities. No regular vaccination programme against FMD was implemented in the province. Poor import controls and quarantine were considered to be the main barriers to the control of FMD in the study area and the surrounding provinces. It can be concluded that, despite relatively good knowledge about FMD in the study area, there are gaps in farmers’ and traders’ knowledge that need to be addressed to overcome the burden of the disease in the province. These should focus on strengthening interprovincial quarantine measures and implementation of regular vaccination campaigns against the circulating FMDV within the area

Bulky household waste management in a UK local authority area: current practice, challenges and improvement opportunities

Charnwood Borough Council (CBC), an English local authority, recently introduced a Zero Waste Strategy encompassing targets for waste minimisation and recycling of household waste above UK Government baselines. To achieve these targets various areas of household waste management need to be amended to improve recycling performance. The bulky waste collection service, collecting large items such as furniture and electrical goods was identified as an area to target for improvement. A case study approach was adopted using data collected on a daily basis by CBC to quantify the number and type of items in the bulky waste stream. Current practices of managing bulky household waste are explored; identifying challenges in dealing with this waste stream such as financial and logistical challenges in identifying, collecting, repairing and storage. However, there is potential to increase recycling of some discarded items, particularly the large numbers of mattresses and some wooden furniture unsuitable for reuse

History and epidemiology of foot-and-mouth disease in Afghanistan: A retrospective study

Background Foot and mouth disease (FMD) is endemic in Afghanistan with serotypes O, A and Asia 1 being prevalent. A retrospective study of data collected through passive surveillance of outbreaks of FMD in Afghanistan from 1995 to 2016 was undertaken to determine the temporal and spatial distribution of FMD in the country. Results A total of 4171 outbreaks were reported between 1995 and 2008 with a strong correlation between the number of outbreaks and the number of provinces (r = 0.85, s = 68.2, p < 0.001); and between the number of outbreaks and the number of districts containing infected animals (r = 0.68, s = 147.8, p = 0.008). Of 7558 samples collected from livestock originating from 34 provinces in 2009, 2011 and 2013–2015, 54.1% were test positive (FMDV 3ABC-trapping ELISA) and the prevalence varied significantly between years (χ2 = 263.98, df = 4, P < 0.001). Clinically suspected cases were reported in 2016 with a substantial positive correlation (r = 0.70, P < 0.001) between the number of districts with cases and the number of reported cases. Serotype O was the predominant serotype detected during the study period, although serotypes A and Asia1 were also detected. Cattle were involved in all outbreaks in the study period and infections were detected in all years of the study in Hirat province in the north-west (bordering Iran), Nangarhar province in the east (bordering Pakistan) and Kabul province in the centre of the country. Conclusions The current paper was the first analysis of existing data focusing on the spatiotemporal distribution of FMD in Afghanistan. The findings from this study provide valuable direction for further research to understand the epidemiology of FMD and its control in Afghanistan

Reference management software (RMS) in an academic environment: a survey at a research university in Malaysia

Reference Management Software is used by researchers in academics to manage the bibliographic citations they encounter in their research. With these tools, scholars keep track of the scientific literature they read, and to facilitate the editing of the scientific papers they write. This study presents the results of a quantitative survey performed at a research university in Malaysia. The aims of the survey were to observe how much these softwares are used by the scientific community, to see which softwares are most known and used, and to find out the reasons and the approaches behind their usage. Manually questionnaire was distributed to the Master and PhD students at all faculties in Jun 2014. The data collected were analysed through a constant comparative analysis, and the following categories were drawn: a basic practical approach to the instrument, the heavy impact of the time factor, the force of habit in scholars, economic issues, the importance of training and literacy, and the role that the library can have in this stage. Describing the present situation, the study gives final directions to the libraries to better perform effective tasks about the matter. This study presented here is the first survey of the actual distribution and usage of Reference Management Software in a research university in Malaysia. This picture can give an important glance to Reference Management Software as one of the elements in the academic digital librarie

Enhancement of urban pluvial flood risk management and resilience through collaborative modelling: a UK case study

This paper presents the main findings and lessons learned from the development and implementation of a new methodology for collaborative modelling, social learning and social acceptance of flood risk management technologies. The proposed methodology entails three main phases: (1) stakeholder analysis and engagement; (2) improvement of urban pluvial flood modelling and forecasting tools; and (3) development and implementation of web-based tools for collaborative modelling in flood risk management and knowledge sharing. The developed methodology and tools were tested in the Cranbrook catchment (London Borough of Redbridge, UK), an area that has experienced severe pluvial (surface) flooding in the past. The developed methodologies proved to be useful for promoting interaction between stakeholders, developing collaborative modelling and achieving social acceptance of new technologies for flood risk management. Some limitations for stakeholder engagement were identified and are discussed in the present paper

Functional Analysis of the Aspergillus nidulans Kinome

The filamentous fungi are an ecologically important group of organisms which also have important industrial applications but devastating effects as pathogens and agents of food spoilage. Protein kinases have been implicated in the regulation of virtually all biological processes but how they regulate filamentous fungal specific processes is not understood. The filamentous fungus Aspergillus nidulans has long been utilized as a powerful molecular genetic system and recent technical advances have made systematic approaches to study large gene sets possible. To enhance A. nidulans functional genomics we have created gene deletion constructs for 9851 genes representing 93.3% of the encoding genome. To illustrate the utility of these constructs, and advance the understanding of fungal kinases, we have systematically generated deletion strains for 128 A. nidulans kinases including expanded groups of 15 histidine kinases, 7 SRPK (serine-arginine protein kinases) kinases and an interesting group of 11 filamentous fungal specific kinases. We defined the terminal phenotype of 23 of the 25 essential kinases by heterokaryon rescue and identified phenotypes for 43 of the 103 non-essential kinases. Uncovered phenotypes ranged from almost no growth for a small number of essential kinases implicated in processes such as ribosomal biosynthesis, to conditional defects in response to cellular stresses. The data provide experimental evidence that previously uncharacterized kinases function in the septation initiation network, the cell wall integrity and the morphogenesis Orb6 kinase signaling pathways, as well as in pathways regulating vesicular trafficking, sexual development and secondary metabolism. Finally, we identify ChkC as a third effector kinase functioning in the cellular response to genotoxic stress. The identification of many previously unknown functions for kinases through the functional analysis of the A. nidulans kinome illustrates the utility of the A. nidulans gene deletion constructs

Assessing effects of thermoset polyester resin waste powder on the processing and mechanical properties of natural rubber

Products made of glass fibre reinforced polymers are often disposed of in landfill, incinerated or processed into waste powders at the end of their service life. Waste powders can be recycled as fillers for use in virgin polymers. The effects of up to 50 parts per hundred rubber by weight thermoset polyester resin waste powder on the viscosity, cure and mechanical properties of a sulphur-cured natural rubber compound were studied. The powder had resin polymer particles and glass fibre fragments ranging from approximately a few microns to 700 microns in size. The viscosity remained unchanged and the cure properties deteriorated when the powder was added to the rubber. The hardness, Young’s modulus and tensile modulus increased whereas, the tensile strength, elongation at break, stored energy density at break and tearing energy decreased. There was also evidence of poor adhesion between the powder and rubber. It was concluded that the waste powder could be recycled as an extender filler to replace a portion of the raw rubber in the compound

Characterisation and use of glass fibre reinforced plastic waste powder as filler in styrene-butadiene rubber

Glass fibre reinforced plastic (GRP) wastes are often disposed of in landfill, incinerated or processed into powders. GRP waste powders can be recycled as filler in virgin polymers and should be characterised before they are added to avoid processing problems. A GRP waste powder was characterised using advanced measuring and analytical techniques. These included, scanning electron microscopy, Fourier transform infrared spectrometry, particle size analyser, differential scanning calorimetry, X-ray photo-electron spectroscopy and energy dispersive X-ray microanalyser. The results showed that the waste powder consisted of irregular shaped particles and glass fibre fragments up to 700 m in size. Moreover, the waste powder was a thermoset polyester resin and its chemical constituents were calcium, oxygen, aluminium, silica, chlorine, bromine and carbon. When up to 25 parts per hundred rubber by weight of the GRP waste powder was mixed with a sulphur cure- based styrene-butadiene rubber, the viscosity, scorch and optimum cure times increased, and the rate of cure decreased. The tearing energy, elongation at break, tensile strength, stored energy density at break, and Young’s modulus of the vulcanisate improved as the loading of the waste powder was raised