355 research outputs found

    Luminescent single-walled carbon nanotube-sensitized europium nanoprobes for cellular imaging

    Get PDF
    Lanthanoid-based optical probes with excitation wavelengths in the ultra-violet (UV) range (300–325 nm) have been widely developed as imaging probes. Efficient cellular imaging requires that lanthanoid optical probes be excited at visible wavelengths, to avoid UV damage to cells. The efficacy of europium-catalyzed single-walled carbon nanotubes (Eu-SWCNTs), as visible nanoprobes for cellular imaging, is reported in this study. Confocal fluorescence microscopy images of breast cancer cells (SK-BR-3 and MCF-7) and normal cells (NIH 3T3), treated with Eu-SWCNT at 0.2 μg/mL concentration, showed bright red luminescence after excitation at 365 nm and 458 nm wavelengths. Cell viability analysis showed no cytotoxic effects after the incubation of cells with Eu-SWCNTs at this concentration. Eu-SWCNT uptake is via the endocytosis mechanism. Labeling efficiency, defined as the percentage of incubated cells that uptake Eu-SWCNT, was 95%–100% for all cell types. The average cellular uptake concentration was 6.68 ng Eu per cell. Intracellular localization was further corroborated by transmission electron microscopy and Raman microscopy. The results indicate that Eu-SWCNT shows potential as a novel cellular imaging probe, wherein SWCNT sensitizes Eu3+ ions to allow excitation at visible wavelengths, and stable time-resolved red emission. The ability to functionalize biomolecules on the exterior surface of Eu-SWCNT makes it an excellent candidate for targeted cellular imaging

    Nonlinear continuous feedback controllers

    Get PDF
    Packet-switched communication networks such as today's Internet are built with several interconnected core and distribution packet forwarding routers and several sender and sink transport agents. In order to maintain stability and avoid congestion collapse in the network, the sources control their rate behavior and voluntarily adjust their sending rates to accommodate other sources in the network. In this thesis, we study one class of sender rate control that is modeled using continuous first-order differential equation of the sending rates. In order to adjust the rates appropriately, the network sends continuous packet-loss feedback to the sources. We study a form of closed-loop feedback congestion controllers whose rate adjustments exhibit a nonlinear form. There are three dimensions to our work in this thesis. First, we study the network optimization problem in which sources choose utilities to maximize their underlying throughput. Each sender maximizes its utility proportional to the throughput achieved. In our model, sources choose a utility function to define their level of satisfaction of the underlying resource usages. The objective of this direction is to establish the properties of source utility functions using inequality constrained bounded sets and study the functional forms of utilities against a chosen rate differential equation. Second, stability of the network and tolerance to perturbation are two essential factors that keep communication networks operational around the equilibrium point. Our objective in this part of the thesis is to analytically understand the existence of local asymptotic stability of delayed-feedback systems under homogeneous network delays. Third, we propose a novel tangential controller for a generic maximization function and study its properties using nonlinear optimization techniques. We develop the necessary theoretical background and the properties of our controller to prove that it is a better rate adaptation algorithm for logarithmic utilities compared to the well-studied proportional controllers. We establish the asymptotic local stability of our controller with upper bounds on the increase / decrease gain parameters

    Single-walled carbon nanotubes as a multimodal-thermoacoustic and photoacoustic-contrast agent

    Get PDF
    We have developed a novel carbon nanotube-based contrast agent for both thermoacoustic and photoacoustic tomography. In comparison to deionized water, single-walled carbon nanotubes exhibited more than twofold signal enhancement for thermoacoustic tomography at 3GHz. In comparison to blood, they exhibited more than sixfold signal enhancement for photoacoustic tomography at 1064nm wavelength. The large contrast enhancement of single-walled carbon nanotubes was further corroborated by tissue phantom imaging studies

    Multiscale Photoacoustic Microscopy of Single-Walled Carbon Nanotube-Incorporated Tissue Engineering Scaffolds

    Get PDF
    Three-dimensional polymeric scaffolds provide structural support and function as substrates for cells and bioactive molecules necessary for tissue regeneration. Noninvasive real-time imaging of scaffolds and/or the process of tissue formation within the scaffold remains a challenge. Microcomputed tomography, the widely used technique to characterize polymeric scaffolds, shows poor contrast for scaffolds immersed in biological fluids, thereby limiting its utilities under physiological conditions. In this article, multiscale photoacoustic microscopy (PAM), consisting of both acoustic-resolution PAM (AR-PAM) and optical-resolution PAM (OR-PAM), was employed to image and characterize single-walled carbon-nanotube (SWNT)–incorporated poly(lactic-co-glycolic acid) polymer scaffolds immersed in biological buffer. SWNTs were incorporated to reinforce the mechanical properties of the scaffolds, and to enhance the photoacoustic signal from the scaffolds. By choosing excitation wavelengths of 570 and 638 nm, multiscale PAM could spectroscopically differentiate the photoacoustic signals generated from blood and from carbon-nanotube-incorporated scaffolds. OR-PAM, providing a fine lateral resolution of 2.6 μm with an adequate tissue penetration of 660 μm, successfully quantified the average porosity and pore size of the scaffolds to be 86.5%±1.2% and 153±15 μm in diameter, respectively. AR-PAM further extended the tissue penetration to 2 mm at the expense of lateral resolution (45 μm). Our results suggest that PAM is a promising tool for noninvasive real-time imaging and monitoring of tissue engineering scaffolds in vitro, and in vivo under physiological conditions

    In vivo carbon nanotube-enhanced non-invasive photoacoustic mapping of the sentinel lymph node

    Get PDF
    Sentinel lymph node biopsy (SLNB), a less invasive alternative to axillary lymph node dissection (ALND), has become the standard of care for patients with clinically node-negative breast cancer. In SLNB, lymphatic mapping with radio-labeled sulfur colloid and/or blue dye helps identify the sentinel lymph node (SLN), which is most likely to contain metastatic breast cancer. Even though SLNB, using both methylene blue and radioactive tracers, has a high identification rate, it still relies on an invasive surgical procedure, with associated morbidity. In this study, we have demonstrated a non-invasive single-walled carbon nanotube (SWNT)-enhanced photoacoustic (PA) identification of SLN in a rat model. We have successfully imaged the SLN in vivo by PA imaging (793 nm laser source, 5 MHz ultrasonic detector) with high contrast-to-noise ratio (=89) and good resolution (~500 µm). The SWNTs also show a wideband optical absorption, generating PA signals over an excitation wavelength range of 740–820 nm. Thus, by varying the incident light wavelength to the near infrared region, where biological tissues (hemoglobin, tissue pigments, lipids and water) show low light absorption, the imaging depth is maximized. In the future, functionalization of the SWNTs with targeting groups should allow the molecular imaging of breast cancer

    Novel breast cancer detection system combining both thermoacoustic (TA) and photoacoustic (PA) tomography using carbon nanotubes (CNTs) as a dual contrast agent

    Get PDF
    We report here a novel breast cancer scanner using microwave and light excitation and ultrasound detection. This combined thermoacoustic and photoacoustic tomography scanner is a nonionizing low cost system that can potentially provide high-resolution, dual contrast (microwave and light absorption) three dimensional images of the breast. Front breast compression will be used in this scanner to alleviate patient discomfort, experienced in side breast compression during traditional X-ray mammography. This scanner will use dry instead of gel ultrasonic coupling. We have also developed a carbon nanotube-based contrast agent for both thermoacoustic and photoacoustic imaging. In the future, targeted molecular photoacoustic and thermoacoustic imaging should be possible using this contrast agent

    Detection, Mapping, and Quantification of Single Walled Carbon Nanotubes in Histological Specimens with Photoacoustic Microscopy

    Get PDF
    Contains fulltext : 110845.pdf (publisher's version ) (Open Access)AIMS: In the present study, the efficacy of multi-scale photoacoustic microscopy (PAM) was investigated to detect, map, and quantify trace amounts [nanograms (ng) to micrograms (microg)] of SWCNTs in a variety of histological tissue specimens consisting of cancer and benign tissue biopsies (histological specimens from implanted tissue engineering scaffolds). MATERIALS AND METHODS: Optical-resolution (OR) and acoustic-resolution (AR)--Photoacoustic microscopy (PAM) was employed to detect, map and quantify the SWCNTs in a variety of tissue histological specimens and compared with other optical techniques (bright-field optical microscopy, Raman microscopy, near infrared (NIR) fluorescence microscopy). RESULTS: Both optical-resolution and acoustic-resolution PAM, allow the detection and quantification of SWCNTs in histological specimens with scalable spatial resolution and depth penetration. The noise-equivalent detection sensitivity to SWCNTs in the specimens was calculated to be as low as approximately 7 pg. Image processing analysis further allowed the mapping, distribution, and quantification of the SWCNTs in the histological sections. CONCLUSIONS: The results demonstrate the potential of PAM as a promising imaging technique to detect, map, and quantify SWCNTs in histological specimens, and could complement the capabilities of current optical and electron microscopy techniques in the analysis of histological specimens containing SWCNTs

    Single-walled carbon nanotubes as a multimodal-thermoacoustic and photoacoustic-contrast agent

    Get PDF
    We have developed a novel carbon nanotube-based contrast agent for both thermoacoustic and photoacoustic tomography. In comparison to deionized water, single-walled carbon nanotubes exhibited more than twofold signal enhancement for thermoacoustic tomography at 3GHz. In comparison to blood, they exhibited more than sixfold signal enhancement for photoacoustic tomography at 1064nm wavelength. The large contrast enhancement of single-walled carbon nanotubes was further corroborated by tissue phantom imaging studies
    • …
    corecore