39 research outputs found
Chemotherapy and diffuse low-grade gliomas: a survey within the European Low-Grade Glioma Network.
Diffuse low-grade gliomas (DLGGs) are rare and incurable tumors. Whereas maximal safe, functional-based surgical resection is the first-line treatment, the timing and choice of further treatments (chemotherapy, radiation therapy, or combined treatments) remain controversial.
An online survey on the management of DLGG patients was sent to 28 expert centers from the European Low-Grade Glioma Network (ELGGN) in May 2015. It contained 40 specific questions addressing the modalities of use of chemotherapy in these patients.
The survey demonstrated a significant heterogeneity in practice regarding the initial management of DLGG patients and the use of chemotherapy. Interestingly, radiation therapy combined with the procarbazine, CCNU (lomustine), and vincristine regimen has not imposed itself as the gold-standard treatment after surgery, despite the results of the Radiation Therapy Oncology Group 9802 study. Temozolomide is largely used as first-line treatment after surgical resection for high-risk DLGG patients, or at progression.
The heterogeneity in the management of patients with DLGG demonstrates that many questions regarding the postoperative strategy and the use of chemotherapy remain unanswered. Our survey reveals a high recruitment potential within the ELGGN for retrospective or prospective studies to generate new data regarding these issues
Computer-assisted and patient-specific 3-D planning and evaluation of a single-cut rotational osteotomy for complex long-bone deformities
Malunion after long bone fracture results in an incorrect position of the distal bone segment. This misalignment may lead to reduced function of the limb, early osteoarthritis and chronic pain. An established treatment option is a corrective osteotomy. For complex malunions, a single-cut rotational osteotomy is sometimes preferred in cases of angular deformity in three dimensions. However, planning and performing this type of osteotomy is relatively complex. This report describes a computer-assisted method for 3-D planning and realizing a single-cut rotational osteotomy with a patient-specific cutting guide for orienting the osteotomy and an angled jig for adjusting the rotation angle. The accuracy and reproducibility of the method is evaluated experimentally using plastic bones. In addition, complex rotational deformities are simulated by a computer to investigate the relation between deformity and correction parameters. The computed relation between deformity and correction parameters enables the surgeon to judge the feasibility of a single-cut rotational osteotomy. This appears possible for deformities combining axial misalignment with sufficient axial rotation. The proposed 3-D method of preoperative planning and transfer with a patient-specific cutting guide and angled jig renders the osteotomy procedure easily applicable, accurate, reproducible, and is a good alternative for complex and expensive navigation systems
Optimal functional outcome measures for assessing treatment for Dupuytren's disease: A systematic review and recommendations for future practice
This article is available through the Brunel Open Access Publishing Fund. Copyright © 2013 Ball et al.; licensee BioMed Central Ltd.Background: Dupuytren's disease of the hand is a common condition affecting the palmar fascia, resulting in progressive flexion deformities of the digits and hence limitation of hand function. The optimal treatment remains unclear as outcomes studies have used a variety of measures for assessment. Methods: A literature search was performed for all publications describing surgical treatment, percutaneous needle aponeurotomy or collagenase injection for primary or recurrent Dupuytren’s disease where outcomes had been monitored using functional measures. Results: Ninety-one studies met the inclusion criteria. Twenty-two studies reported outcomes using patient reported outcome measures (PROMs) ranging from validated questionnaires to self-reported measures for return to work and self-rated disability. The Disability of Arm, Shoulder and Hand (DASH) score was the most utilised patient-reported function measure (n=11). Patient satisfaction was reported by eighteen studies but no single method was used consistently. Range of movement was the most frequent physical measure and was reported in all 91 studies. However, the methods of measurement and reporting varied, with seventeen different techniques being used. Other physical measures included grip and pinch strength and sensibility, again with variations in measurement protocols. The mean follow-up time ranged from 2 weeks to 17 years. Conclusions: There is little consistency in the reporting of outcomes for interventions in patients with Dupuytren’s disease, making it impossible to compare the efficacy of different treatment modalities. Although there are limitations to the existing generic patient reported outcomes measures, a combination of these together with a disease-specific questionnaire, and physical measures of active and passive individual joint Range of movement (ROM), grip and sensibility using standardised protocols should be used for future outcomes studies. As Dupuytren’s disease tends to recur following treatment as well as extend to involve other areas of the hand, follow-up times should be standardised and designed to capture both short and long term outcomes
Validity of the disabilities of the Arm, Shoulder and Hand patient-reported outcome measure (DASH) and the Quickdash when used in Dupuytren’s disease
This study investigated aspects of the validity and reliability of the 30-item Disabilities of the Arm, Shoulder and Hand patient-reported outcome measure (DASH) and its relationship with the shorter 11-item QuickDASH in patients with Dupuytren’s disease.
Seven hundred and fifty-nine DASH questionnaires were studied, covering pre- and postoperative patients undergoing different treatments for Dupuytren’s disease. Items related to pain rose early after treatment before returning to baseline, suggesting that studying pain is relevant during postoperative recovery. Across all 759 sets of responses, the QuickDASH agreed closely with the DASH. In exploratory factor analysis, the DASH was not unidimensional, questioning the validity of the DASH summary score in Dupuytren’s disease.
Further validation of existing PROMs for use in Dupuytren’s disease is needed. These data suggest that pain is a relevant symptom to study during postoperative recovery following treatment for Dupuytren’s disease
Heralding manifestations of basilar artery occlusion with lethal or severe stroke
Background: Basilar artery occlusion usually causes severe disability or death. Until the recent developments in local intra-arterial or systemic intravenous fibrinolysis, interest in early diagnosis was low because there was no satisfactory treatment. Thus there is little information about the initial phase of the disease. Objective: To report on the early clinical features and patterns of evolution of severe symptomatic basilar artery occlusion. Methods: 24 patients with established basilar artery occlusion (confirmed by angiography or at necropsy) were reviewed retrospectively, focusing on the early clinical aspects and time course of the disease. Results: The most common initial symptoms were motor deficits (16/24, including facial palsies), articulatory speech difficulties (15/24), vertigo, nausea or vomiting (13/24), and headaches (10/24). The most frequent objective initial findings were motor deficits (22/24), facial palsies (19/24), eye movement abnormalities (15/24), lower cranial nerve deficits (15/24), altered level of consciousness (12/24), and bilateral extensor plantar responses (9/24). Onset of the disease was gradual in nearly all patients and in half the warning signs were present for up to two months before the final stage. Headaches and visual disturbances were early signs, while speech difficulties and motor deficits were late signs. Once permanent neurological deficits were present, the final illness was reached within six hours in 41%, between six and 24 hours in 32%, and in two to three days in 27%. Conclusions: All the patients reviewed presented some symptoms and signs pointing to brain stem involvement. Only 8% (2/24) had an acute course with no adequate warning signs
Influence of test temperature on biomechanical properties of all-inside meniscal repair devices and inside-out meniscus sutures - evaluation of an isolated distraction loading, worst-case scenario
20°C environmental temperature seems to be an acceptable test condition for the most meniscal repair devices. However, if the bioabsorbable part of the implant is the weakest link, body temperature may be considered for testing to prevent false overestimation of the biomechanical properties. For future biomechanical in vitro testing of meniscal repair devices, this study may provide novel insight into biomechanical test protocols for considering the environmental test temperature as an influencing factor of the biomechanical properties of especially bioabsorbable meniscal repair devices
Tensile and shear loading stability of all-inside meniscal repairs: an in vitro biomechanical evaluation
BACKGROUND: Most biomechanical studies for evaluation of the structural properties of meniscal repairs have been performed in tensile loading scenarios perpendicular to the circumferential meniscal fibers. However, meniscal repair constructs are also exposed to shear forces parallel to the circumferential meniscal fibers during healing, particularly in the midportion of the meniscus.
HYPOTHESIS: Material properties of meniscal repair devices cannot be extrapolated from tensile to shear load scenarios.
STUDY DESIGN: Controlled laboratory study.
METHODS: In 84 harvested and isolated bovine lateral menisci following removal of adjacent soft tissue, a standardized vertical lesion was set followed by repair using all-inside flexible (FasT-Fix, FasT-Fix AB, RapidLoc) and rigid (Meniscus Screw, Meniscus Arrow) meniscal repair devices. Vertical and horizontal 2.0 Ethibond sutures were used as controls. The repaired meniscal construct was tested in a tensile (parallel to the axis of the tested repair device) and shear load scenario (perpendicular to the axis of the tested repair device) at 5 mm/min and 37 degrees C environmental temperature. Maximum load to failure, stiffness, and failure mode were recorded.
RESULTS: The absolute load to failure values of each repair device in the shear scenario were only marginally different from the tensile load scenario. However, the stiffness of several tested devices was markedly reduced in the shear scenario. In both scenarios, large differences of the load to failure and the stiffness between the implant types up to 5-fold were found (P < .05). The failure mode of several all-inside flexible repair devices was different in the shear versus tensile load scenario, while the failure mode of the rigid systems was similar in both scenarios.
CONCLUSION: All-inside meniscal repair devices exposed to shear load scenarios have comparable maximum loads to failures as tensile load scenarios. However, the stiffness of the majority of the flexible meniscal repair implants in a shear load scenario is markedly reduced. The applied scenario also affects the failure mode in several flexible meniscal repair devices.
CLINICAL RELEVANCE: Meniscal repair devices with sufficient stiffness and stability against shear loads may be favored for meniscal repair, especially within the midportion of the meniscus where shear loads occur during healing
It’s been a decade: The Swiss Young Neurosurgeons Society
The Swiss Young Neurosurgeons Society (SYNS) comes to life in 2008, creating a community renowned for its unique spirit, a platform dedicated to lifelong teaching and learning. In 2008, a small group of Swiss residents found a cross-canton training platform to provide dedicated, affordable courses organized by residents to directly support their peers. After almost 10 years, SYNS thrives on its unique, familial spirit cultivating a direct contact with teachers as well as with their supporters. The society provides up to four annual training courses and serves as an open platform for residents to exchange experiences and to represent their members’ interests on a national and international level
Evaluation of a New Brain Tissue Probe for Intracranial Pressure, Temperature and Cerebral Blood Flow Monitoring in Patients with aneurysmal subarachnoid hemorrhage
Objective: To evaluate a brain tissue probe for intracranial pressure (ICP) and temperature (TEMP) monitoring as well as determination of cerebral hemodynamics using a near infrared spectroscopy (NIRS) and indocyanine green (ICG) dye dilution method (NIRS-ICP probe). Methods: The NIRS-ICP probe was applied after aneurysmal subarachnoid hemorrhage if multimodal monitoring was established due to poor neurological condition. ICP and TEMP values were obtained from ventricular catheters and systemic temperature sensors. Repeated NIRS-ICG measurements (2 injections within 30 minutes) were performed daily for determination of cerebral blood flow (CBF), cerebral blood volume (CBV) and mean transit time of ICG (mttICG). Delayed cerebral ischemia was defined as brain tissue oxygen tension 35. Results: A total of 128 NIRS-ICG measurements were performed in 10 patients. The correlation coefficient between ICP and TEMP values obtained with the NIRS-ICP probe and values from routine monitoring was r=0.72 and r=0.96, respectively. The mean value was 30.3 ± 13.6 ml/100g/min for CBF, 3.3 ± 1.2 ml/100g for CBV, and 6.8 ± 1.6 sec for mttICG. The coefficient of variation from repeated NIRS-ICG measurements was 10.9% for CBF, 11.7% for CBV, and 3.8% for mttICG. The sensitivity for delayed cerebral ischemia detection was 85% and the specificity 83% using a CBFthreshold of 25 ml/100g/min. Conclusion: Multimodal monitoring using the NIRS-ICP probe is feasible with high reproducibility of measurement values and the ability to detect delayed cerebral ischemia. No safety concerns exist for the routine clinical use of the NIRS-ICP probe