Adaptations in equine appendicular muscle activity and movement occur during induced fore- and hindlimb lameness: An electromyographic and kinematic evaluation

The relationship between lameness-related adaptations in equine appendicular motion and muscle activation is poorly understood and has not been studied objectively. The aim of this study was to compare muscle activity of selected fore- and hindlimb muscles, and movement of the joints they act on, between baseline and induced forelimb (iFL) and hindlimb (iHL) lameness. Three-dimensional kinematic data and surface electromyography (sEMG) data from the fore- (triceps brachii, latissimus dorsi) and hindlimbs (superficial gluteal, biceps femoris, semitendinosus) were bilaterally and synchronously collected from clinically non-lame horses ( n = 8) trotting over-ground (baseline). Data collections were repeated during iFL and iHL conditions (2-3/5 AAEP), induced on separate days using a modified horseshoe. Motion asymmetry parameters and continuous joint and pro-retraction angles for each limb were calculated from kinematic data. Normalized average rectified value (ARV) and muscle activation onset, offset and activity duration were calculated from sEMG signals. Mixed model analysis and statistical parametric mapping, respectively, compared discrete and continuous variables between conditions (α= 0.05). Asymmetry parameters reflected the degree of iFL and iHL. Increased ARV occurred across muscles following iFL and iHL, except non-lame side forelimb muscles that significantly decreased following iFL. Significant, limb-specific changes in sEMG ARV, and activation timings reflected changes in joint angles and phasic shifts of the limb movement cycle following iFL and iHL. Muscular adaptations during iFL and iHL are detectable using sEMG and primarily involve increased bilateral activity and phasic activation shifts that reflect known compensatory movement patterns for reducing weightbearing on the lame limb. With further research and development, sEMG may provide a valuable diagnostic aid for quantifying the underlying neuromuscular adaptations to equine lameness, which are undetectable through human observation alone

Musculoskeletal Disease in Aged Horses and Its Management

Musculoskeletal disorders are the most prevalent health problem in aging horses. They are not life threatening, but are painful and an important welfare issue. Chronic joint disease (osteoarthritis) and chronic laminitis are the most prevalent. Treating osteoarthritis in the elderly horse is similar to treating performance horses, but aims at providing a stable situation with optimal comfort. Immediate medical treatment of flare-ups, long-term pain management, and adaptation of exercise and living conditions are the mainstays of treatment. Laminitis in the geriatric horse is related often to pituitary pars intermedia dysfunction, which may be treated with additional pergolide

Musculoskeletal disease in aged horses and its management

Musculoskeletal disorders are the most prevalent health problem in aging horses. They are not life threatening, but are painful and an important welfare issue. Chronic joint disease (osteoarthritis) and chronic laminitis are the most prevalent. Treating osteoarthritis in the elderly horse is similar to treating performance horses, but aims at providing a stable situation with optimal comfort. Immediate medical treatment of flare-ups, long-term pain management, and adaptation of exercise and living conditions are the mainstays of treatment. Laminitis in the geriatric horse is related often to pituitary pars intermedia dysfunction, which may be treated with additional pergolide

From intricate to integrated: Biofabrication of articulating joints

Articulating joints owe their function to the specialized architecture and the complex interplay between multiple tissues including cartilage, bone and synovium. Especially the cartilage component has limited self-healing capacity and damage often leads to the onset of osteoarthritis, eventually resulting in failure of the joint as an organ. Although in its infancy, biofabrication has emerged as a promising technology to reproduce the intricate organization of the joint, thus enabling the introduction of novel surgical treatments, regenerative therapies, and new sets of tools to enhance our understanding of joint physiology and pathology. Herein, we address the current challenges to recapitulate the complexity of articulating joints and how biofabrication could overcome them. The combination of multiple materials, biological cues and cells in a layer-by-layer fashion, can assist in reproducing both the zonal organization of cartilage and the gradual transition from resilient cartilage toward the subchondral bone in biofabricated osteochondral grafts. In this way, optimal integration of engineered constructs with the natural surrounding tissues can be obtained. Mechanical characteristics, including the smoothness and low friction that are hallmarks of the articular surface, can be tuned with multi-head or hybrid printers by controlling the spatial patterning of printed structures. Moreover, biofabrication can use digital medical images as blueprints for printing patient-specific implants. Finally, the current rapid advances in biofabrication hold significant potential for developing joint-on-a-chip models for personalized medicine and drug testing or even for the creation of implants that may be used to treat larger parts of the articulating joint. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res

From intricate to integrated: Biofabrication of articulating joints

Articulating joints owe their function to the specialized architecture and the complex interplay between multiple tissues including cartilage, bone and synovium. Especially the cartilage component has limited self-healing capacity and damage often leads to the onset of osteoarthritis, eventually resulting in failure of the joint as an organ. Although in its infancy, biofabrication has emerged as a promising technology to reproduce the intricate organization of the joint, thus enabling the introduction of novel surgical treatments, regenerative therapies, and new sets of tools to enhance our understanding of joint physiology and pathology. Herein, we address the current challenges to recapitulate the complexity of articulating joints and how biofabrication could overcome them. The combination of multiple materials, biological cues and cells in a layer-by-layer fashion, can assist in reproducing both the zonal organization of cartilage and the gradual transition from resilient cartilage toward the subchondral bone in biofabricated osteochondral grafts. In this way, optimal integration of engineered constructs with the natural surrounding tissues can be obtained. Mechanical characteristics, including the smoothness and low friction that are hallmarks of the articular surface, can be tuned with multi-head or hybrid printers by controlling the spatial patterning of printed structures. Moreover, biofabrication can use digital medical images as blueprints for printing patient-specific implants. Finally, the current rapid advances in biofabrication hold significant potential for developing joint-on-a-chip models for personalized medicine and drug testing or even for the creation of implants that may be used to treat larger parts of the articulating joint. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res

A comparative study of breed differences in the anatomical configuration of the equine vertebral column

The importance of the equine thoracolumbar vertebral column in orthopaedic disorders is well recognized and diagnostic imaging becomes more feasible, but little is known about variations in the anatomical configuration within breeds. In this descriptive post-mortem study, anatomical variations in three widely differing breeds: Warmblood horses, Shetland ponies and semi-feral Konik horses are described. The caudal cervical (C), thoracic (T), lumbar (L) and sacral (S) regions of the vertebral column of 30 Warmblood horses, 29 Shetland ponies and 18 Konik horses were examined using computed tomography and visualized by volume rendering. Homologous/morphologic variations in the caudal cervical area were frequently seen in Warmblood horses (43%), which was significantly more than in the other breeds (p < 0.001). The as standard described equine formula of 18 T, 6 L and 5 S vertebrae was seen in 78% of Konik horses, but only in 53% Warmblood horses and 38% Shetland ponies, which was significantly different (p < 0.05). Overall, Shetland ponies showed a higher tendency of thoracoization, lumbarization and more variations in the number of vertebrae and pairs of ribs. Ankylosed intertransverse joints (ITJs) between transverse processes of the lumbar vertebrae were most common between the second last and last lumbar vertebra and prevalence was significantly higher in Shetland ponies (61%), than in Warmblood horses (38%) and Konik horses (7%) (p < 0.0001). Cranial to the second last lumbar vertebra there were fewer ITJs ankylosed (14%) in Warmblood horses (p < 0.0095), and this decrease in number of ankylosed ITJs was different compared to the change in ankylosed ITJs in Shetland ponies (p < 0.005). ITJs occurred asymmetrically in 15% (12/77) of the cases. A limitation of the study was that clinical data of the horses were only incompletely available, precluding any conclusions about the potential clinical implications of anatomical variations. Knowledge of variation in osseous anatomy of the equine thoracolumbar vertebral column is important for the interpretation of diagnostic imaging. To assess the functional importance and clinical relevance of this variation, follow-up studies are necessary

A comparative study of breed differences in the anatomical configuration of the equine vertebral column

The importance of the equine thoracolumbar vertebral column in orthopaedic disorders is well recognized and diagnostic imaging becomes more feasible, but little is known about variations in the anatomical configuration within breeds. In this descriptive post-mortem study, anatomical variations in three widely differing breeds: Warmblood horses, Shetland ponies and semi-feral Konik horses are described. The caudal cervical (C), thoracic (T), lumbar (L) and sacral (S) regions of the vertebral column of 30 Warmblood horses, 29 Shetland ponies and 18 Konik horses were examined using computed tomography and visualized by volume rendering. Homologous/morphologic variations in the caudal cervical area were frequently seen in Warmblood horses (43%), which was significantly more than in the other breeds (p < 0.001). The as standard described equine formula of 18 T, 6 L and 5 S vertebrae was seen in 78% of Konik horses, but only in 53% Warmblood horses and 38% Shetland ponies, which was significantly different (p < 0.05). Overall, Shetland ponies showed a higher tendency of thoracoization, lumbarization and more variations in the number of vertebrae and pairs of ribs. Ankylosed intertransverse joints (ITJs) between transverse processes of the lumbar vertebrae were most common between the second last and last lumbar vertebra and prevalence was significantly higher in Shetland ponies (61%), than in Warmblood horses (38%) and Konik horses (7%) (p < 0.0001). Cranial to the second last lumbar vertebra there were fewer ITJs ankylosed (14%) in Warmblood horses (p < 0.0095), and this decrease in number of ankylosed ITJs was different compared to the change in ankylosed ITJs in Shetland ponies (p < 0.005). ITJs occurred asymmetrically in 15% (12/77) of the cases. A limitation of the study was that clinical data of the horses were only incompletely available, precluding any conclusions about the potential clinical implications of anatomical variations. Knowledge of variation in osseous anatomy of the equine thoracolumbar vertebral column is important for the interpretation of diagnostic imaging. To assess the functional importance and clinical relevance of this variation, follow-up studies are necessary