Synthesis of biodegradable polyesteramides with pendant functional groups

Morpholine-2,5-dione derivatives having substituents with benzyl-protected carboxylic acid, benzyloxycarbonyl-protected amine and p-methoxy-protected thiol groups, respectively, were prepared in 29-58% yield by cyclization of the corresponding N-[(2RS)-bromopropionyl]-L-amino acids. Polyesteramides with protected pendant functional groups were obtained by ring-opening copolymerization of either ε-caprolactone or DL-lactide with morpholine-2,5-dione derivatives having protected functional substituents. The copolymerizations were carried out in the bulk at 130°C using stannous octoate as an initiator and using low mole fractions (0,05, 0,10 and 0,20) of morpholine-2,5-dione derivatives in the feed. The molecular weight of the resulting copolymers ranged from 1,4 to 8,3 · 104. The ring-opening homopolymerization of morpho-line-2,5-dione derivatives with protected functional substituents was not successful. Polyesteramides with either pendant carboxylic acid groups or pendant amine groups were prepared by catalytic hydrogenation of the corresponding protected copolymers. Treatment of copolymers having pendant p-methoxybenzyl-protected thiol groups with trifluoromethanesulfonic acid resulted not only in the removal of the p-methoxybenzyl group but also in severe degradation of the copolymers, due to acidolysis of main-chain ester bonds

Copolymerization of ε-caprolactone and morpholine-2,5-dione derivatives

Novel biodegradable poly(ester-amide)s were prepared by ring-opening copolymerization of -caprolactone and 3- and/or 6-alkyl-substituted morpholine-2,5-dione derivatives. The copolymerizations were carried out in the bulk using stannous octoate as an initiator. Molecular weights of the copolymers ranged from 1,0 · 104 to 8,3 · 104 and decreased with increasing mole fractions of morpholine-2,5-dione derivatives in the feed. 13C NMR sequence analysis indicated that the copolymers had a random distribution of -oxycaproyl and depsipeptide units, which resulted from the occurrence of transesterification reactions during copolymerization. The results of the DSC measurements and 13C NMR sequence analysis showed a close relationship between the crystallinity and average length of ε-oxycaproyl blocks. Copolymers with a mole fraction of depsipeptide units smaller than 0,20 were semi-crystalline, whereas incorporation of larger amounts of depsipeptide units resulted in amorphous copolymers. The melting point depression as a function of the molar composition of the semi-crystalline copolymers was in good agreement with the melting point depression predicted by the Baur equation, which indicated the rejection of depsipeptide units from crystals consisting of ε-oxycaproyl units

Glycine/Glycolic acid based copolymers

Glycine/glycolic acid based biodegradable copolymers have been prepared by ring-opening homopolymerization of morpholine-2,5-dione, and ring-opening copolymerization of morpholine-2,5-dione and glycolide. The homopolymerization of morpholine-2,5-dione was carried out in the melt at 200°C for 3 min using stannous octoate as an initiator, and continued at lower reaction temperatures (100-160°C) for 2-48 h. The highest yields (60%) and intrinsic viscosities ([] = 0.50 dL/g; DMSO, 25°C) were obtained after 3 min reaction at 200°C and 17 h at 130°C using a molar ratio of monomer and initiator of 1000. The polymer prepared by homopolymerization of morpholine-2,5-dione was composed of alternating glycine and glycolic acid residues, and had a glass transition temperature of 67°C and a melting temperature of 199°C. Random copolymers of glycine and glycolic acid were synthesized by copolymerization of morpholine-2,5-dione and glycolide in the melt at 200°C, followed by 17 h reaction at 130°C using stannous octoate as an initiator. The morphology of the copolymers varied from semi-crystalline to amorphous, depending on the mole fraction of glycolic acid residues incorporated

Melt block copolymerization of ε-caprolactone and L-lactide

AB block copolymers of ε-caprolactone and (L)-lactide could be prepared by ring-opening polymerization in the melt at 110°C using stannous octoate as a catalyst and ethanol as an initiator provided ε-caprolactone was polymerized first. Ethanol initiated the polymerization of ε-caprolactone producing a polymer with ε-caprolactone derived hydroxyl end groups which after addition of L-lactide in the second step of the polymerization initiated the ring-opening copolymerization of L-lactide. The number-average molecular weights of the poly(ε-caprolactone) blocks varied from 1.5 to 5.2 × 103, while those of the poly(L-lactide) blocks ranged from 17.4 to 49.7 × 103. The polydispersities of the block copolymers varied from 1.16 to 1.27. The number-average molecular weights of the polymers were controlled by the monomer/hydroxyl group ratio, and were independent on the monomer/stannous octoate ratio within the range of experimental conditions studied. When L-lactide was polymerized first, followed by copolymerization of ε-caprolactone, random copolymers were obtained. The formation of random copolymers was attributed to the occurrence of transesterification reactions. These side reactions were caused by the ε-caprolactone derived hydroxyl end groups generated during the copolymerization of ε-caprolactone with pre-polymers of L-lactide. The polymerization proceeds through an ester alcoholysis reaction mechanism, in which the stannous octoate activated ester groups of the monomers react with hydroxyl groups

Anionic polymerization of primary acrylates as promoted by Lithium 2-(2-Methoxyethoxy) ethoxide

Some primary acrylates, such as methyl, ethyl, n-butyl, and n-nonyl acrylate (MA, EA, nBuA and nNonA, respectively) have been anionically polymerized by using diphenylmethyl lithium (DPMLi) as an initiator, in the presence of a chelating - dual ligand, i.e., a polydentate lithium alkoxide, at low temperature. It has been found that lithium 2-(2-methoxyethoxy) ethoxide (LiOEEM) is a very efficient ligand in preventing the anionic polymerization of these monomers from being disturbed by significant secondary transfer and termination reactions. Even for the difficult cases of ethyl and methylacrylate, that approach provides high polymerization yields and low polydispersity, allowing the molecular weight to be predetermined. LiOEEM/initiator molar ratio, solvent polarity, temperature and monomer concentration have proved to be key parameters in the control of the polymerization process. The efficiency of that control is however dependent on the monomer structure and improves with the length of the n-alkyl substituent, i.e., MA < EA < nBuA < nNonA

A cancer drug atlas enables synergistic targeting of independent drug vulnerabilities

Personalized cancer treatments using combinations of drugs with a synergistic effect is attractive but proves to be highly challenging. Here we present an approach to uncover the efficacy of drug combinations based on the analysis of mono-drug effects. For this we used dose-response data from pharmacogenomic encyclopedias and represent these as a drug atlas. The drug atlas represents the relations between drug effects and allows to identify independent processes for which the tumor might be particularly vulnerable when attacked by two drugs. Our approach enables the prediction of combination-therapy which can be linked to tumor-driving mutations. By using this strategy, we can uncover potential effective drug combinations on a pan-cancer scale. Predicted synergies are provided and have been validated in glioblastoma, breast cancer, melanoma and leukemia mouse-models, resulting in therapeutic synergy in 75% of the tested models. This indicates that we can accurately predict effective drug combinations with translational value

Publisher Correction: Whole-genome sequencing of a sporadic primary immunodeficiency cohort (Nature, (2020), 583, 7814, (90-95), 10.1038/s41586-020-2265-1)

An amendment to this paper has been published and can be accessed via a link at the top of the paper