63 research outputs found

    Corrosion fatigue of Ti-6Al-4V coupons manufactured by directed energy deposition

    Get PDF
    Titanium is a versatile biocompatible metal that is desirable in additively manufactured medical implant devices. However, additively manufactured parts have particular microstructures, porosity, residual stress, and surface conditions which can have a strong impact on fatigue performance. Implants have an added complexity from the saline operating environment and the associated impact on the safe design life. Equally, direct energy deposition induces a complex thermal history which, if not carefully controlled, can significantly alter the mechanical/material properties of the component. This study investigates the decrease in fatigue life, in an in vitro body fluid simulation using Ringer's solution, observed in Ti-6Al-4V specimens extracted from coupons manufactured by directed energy deposition. An interrupted deposition strategy was employed to control build regularity, which appeared to influence certain mechanical properties, including corrosion fatigue life. An ≈50% decrease in fatigue life was observed in Ringer's solution at 6 Hz loading frequency, clearly important in designing implants

    Clonal Population of Mycobacterium tuberculosis Strains Reside within Multiple Lung Cavities

    Get PDF
    (MTB) are localized within lung cavities of patients suffering from chronic progressive TB.Multiple cavity isolates from lung of 5 patients who had undergone pulmonary resection surgery were analyzed on the basis of their drug susceptibility profile, and genotyped by spoligotyping and 24-loci MIRU-VNTR. The patients past history including treatment was studied. Three of the 5 patients had extensive drug resistant TB. Heteroresistance was also reported within different cavity isolates of the lung. Both genotyping methods reported the presence of clonal population of MTB strain within different cavities of the each patient, even those reporting heteroresistance. Four of the 5 patients were infected with a population of the Beijing genotype. Post-surgery they were prescribed a drug regimen consisting of cycloserine, a fluoroquinolone and an injectable drug. A 6 month post-surgery follow-up reported only 2 patients with positive clinical outcome, showing sputum conversion.Identical spoligotype patterns and MIRU-VNTR profiles between multiple cavities of each patient, characterize the presence of clonal population of MTB strains (and absence of multiple MTB infection)

    Oxytocin and Vasopressin Involved in Restraint Water-Immersion Stress Mediated by Oxytocin Receptor and Vasopressin 1b Receptor in Rat Brain

    Get PDF
    Aims: Vasopressin (AVP) and oxytocin (OT) are considered to be related to gastric functions and the regulation of stress response. The present study was to study the role of vasopressinergic and oxytocinergic neurons during the restraint waterimmersion stress. Methods: Ten male Wistar rats were divided into two groups, control and RWIS for 1h. The brain sections were treated with a dual immunohistochemistry of Fos and oxytocin (OT) or vasopressin (AVP) or OT receptor or AVP 1b receptor (V1bR). Results: (1) Fos-immunoreactive (Fos-IR) neurons dramatically increased in the hypothalamic paraventricular nucleus (PVN), the supraoptic nucleus (SON), the neucleus of solitary tract (NTS) and motor nucleus of the vagus (DMV) in the RWIS rats; (2) OT-immunoreactive (OT-IR) neurons were mainly observed in the medial magnocellular part of the PVN and the dorsal portion of the SON, while AVP-immunoreactive (AVP-IR) neurons mainly distributed in the magnocellular part of the PVN and the ventral portion of the SON. In the RWIS rats, Fos-IR neurons were indentified in 31 % of OT-IR neurons and 40 % of AVP-IR neurons in the PVN, while in the SON it represented 28%, 53 % respectively; (3) V 1bR-IR and OTR-IR neurons occupied all portions of the NTS and DMV. In the RWIS rats, more than 10 % of OTR-IR and V1bR-IR neurons were activated in the DMV, while lower ratio in the NTS. Conclusion: RWIS activates both oxytocinergic and vasopressinergic neurons in the PVN and SON, which may project to th

    The influence of refuge sharing on social behaviour in the lizard Tiliqua rugosa

    Get PDF
    Refuge sharing by otherwise solitary individuals during periods of inactivity is an integral part of social behaviour and has been suggested to be the precursor to more complex social behaviour. We compared social association patterns of active versus inactive sheltering individuals in the social Australian sleepy lizard, Tiliqua rugosa, to empirically test the hypothesis that refuge sharing facilitates social associations while individuals are active. We fitted 18 neighbouring lizards with Global Positioning System (GPS) recorders to continuously monitor social associations among all individuals, based on location records taken every 10 min for 3 months. Based on these spatial data, we constructed three weighted, undirected social networks. Two networks were based on empirical association data (one for active and one for inactive lizards in their refuges), and a third null model network was based on hypothetical random refuge sharing. We found patterns opposite to the predictions of our hypothesis. Most importantly, association strength was higher in active than in inactive sheltering lizards. That is, individual lizards were more likely to associate with other lizards while active than while inactive and in shelters. Thus, refuge sharing did not lead to increased frequencies of social associations while lizards were active, and we did not find any evidence that refuge sharing was a precursor to sleepy lizard social behaviour. Our study of an unusually social reptile provides both quantitative data on the relationship between refuge sharing and social associations during periods of activity and further insights into the evolution of social behaviour in vertebrates

    SecA, a remarkable nanomachine

    Get PDF
    Biological cells harbor a variety of molecular machines that carry out mechanical work at the nanoscale. One of these nanomachines is the bacterial motor protein SecA which translocates secretory proteins through the protein-conducting membrane channel SecYEG. SecA converts chemically stored energy in the form of ATP into a mechanical force to drive polypeptide transport through SecYEG and across the cytoplasmic membrane. In order to accommodate a translocating polypeptide chain and to release transmembrane segments of membrane proteins into the lipid bilayer, SecYEG needs to open its central channel and the lateral gate. Recent crystal structures provide a detailed insight into the rearrangements required for channel opening. Here, we review our current understanding of the mode of operation of the SecA motor protein in concert with the dynamic SecYEG channel. We conclude with a new model for SecA-mediated protein translocation that unifies previous conflicting data

    Protocol for developing a core outcome set for male infertility research : an international consensus development study

    Get PDF
    STUDY QUESTION We aim to develop, disseminate and implement a minimum data set, known as a core outcome set, for future male infertility research. WHAT IS KNOWN ALREADY Research into male infertility can be challenging to design, conduct and report. Evidence from randomized trials can be difficult to interpret and of limited ability to inform clinical practice for numerous reasons. These may include complex issues, such as variation in outcome measures and outcome reporting bias, as well as failure to consider the perspectives of men and their partners with lived experience of fertility problems. Previously, the Core Outcome Measure for Infertility Trials (COMMIT) initiative, an international consortium of researchers, healthcare professionals and people with fertility problems, has developed a core outcome set for general infertility research. Now, a bespoke core outcome set for male infertility is required to address the unique challenges pertinent to male infertility research. STUDY DESIGN, SIZE, DURATION Stakeholders, including healthcare professionals, allied healthcare professionals, scientists, researchers and people with fertility problems, will be invited to participate. Formal consensus science methods will be used, including the modified Delphi method, modified Nominal Group Technique and the National Institutes of Health’s consensus development conference. PARTICIPANTS/MATERIALS, SETTING, METHODS An international steering group, including the relevant stakeholders outlined above, has been established to guide the development of this core outcome set. Possible core outcomes will be identified by undertaking a systematic review of randomized controlled trials evaluating potential treatments for male factor infertility. These outcomes will be entered into a modified Delphi method. Repeated reflection and re-scoring should promote convergence towards consensus outcomes, which will be prioritized during a consensus development meeting to identify a final core outcome set. We will establish standardized definitions and recommend high-quality measurement instruments for individual core outcomes. STUDY FUNDING/COMPETING INTEREST(S) This work has been supported by the Urology Foundation small project award, 2021. C.L.R.B. is the recipient of a BMGF grant and received consultancy fees from Exscentia and Exceed sperm testing, paid to the University of Dundee and speaking fees or honoraria paid personally by Ferring, Copper Surgical and RBMO. S.B. received royalties from Cambridge University Press, Speaker honoraria for Obstetrical and Gynaecological Society of Singapore, Merk SMART Masterclass and Merk FERRING Forum, paid to the University of Aberdeen. Payment for leadership roles within NHS Grampian, previously paid to self, now paid to University of Aberdeen. An Honorarium is received as Editor in Chief of Human Reproduction Open. M.L.E. is an advisor to the companies Hannah and Ro. B.W.M. received an investigator grant from the NHMRC, No: GNT1176437 is a paid consultant for ObsEva and has received research funding from Ferring and Merck. R.R.H. received royalties from Elsevier for a book, consultancy fees from Glyciome, and presentation fees from GryNumber Health and Aytu Bioscience. Aytu Bioscience also funded MiOXYS systems and sensors. Attendance at Fertility 2020 and Roadshow South Africa by Ralf Henkel was funded by LogixX Pharma Ltd. R.R.H. is also Editor in Chief of Andrologia and has been an employee of LogixX Pharma Ltd. since 2020. M.S.K. is an associate editor with Human Reproduction Open. K.Mc.E. received an honoraria for lectures from Bayer and Pharmasure in 2019 and payment for an ESHRE grant review in 2019. His attendance at ESHRE 2019 and AUA 2019 was sponsored by Pharmasure and Bayer, respectively. The remaining authors declare no competing interests. TRIAL REGISTRATION NUMBER Core Outcome Measures in Effectiveness Trials (COMET) initiative registration No: 1586. Available at www.comet-initiative.org/Studies/Details/1586

    Fall Armyworm (Spodoptera frugiperda)

    Get PDF
    The fall armyworm (FAW), Spodoptera frugiperda (J. E. Smith) (Lepidoptera: Noctuidae), originated from America but is reported recently from Africa and the Asia-Pacific. FAW has caused huge international concern since its outbreak in Africa since 2016 and in Asia since mid-2018. The chapter mainly reviews its global distribution, life cycle, identification characters, strains, host plants, nature of damage, economic damage, and integrated pest management strategies available. The pest completes its life cycle on maize in 30 days (in warm summer months); in cooler temperatures, it may extend up to 60–90 days. For effective management of fall armyworm, different tools, viz., cultural control, agronomic management, breeding for resistance, natural enemies, and eco-friendly insecticides, should be used in an integrated approach. As the insect is recently introduced to Africa and the Asia-Pacific, possible management strategies and future cases of action are discussed

    Protocol for developing a core outcome set for male infertility research: an international consensus development study

    Get PDF
    Study question: We aim to develop, disseminate and implement a minimum data set, known as a core outcome set, for future male infertility research.What is known already: Research into male infertility can be challenging to design, conduct and report. Evidence from randomized trials can be difficult to interpret and of limited ability to inform clinical practice for numerous reasons. These may include complex issues, such as variation in outcome measures and outcome reporting bias, as well as failure to consider the perspectives of men and their partners with lived experience of fertility problems. Previously, the Core Outcome Measure for Infertility Trials (COMMIT) initiative, an international consortium of researchers, healthcare professionals and people with fertility problems, has developed a core outcome set for general infertility research. Now, a bespoke core outcome set for male infertility is required to address the unique challenges pertinent to male infertility research.Study design size duration: Stakeholders, including healthcare professionals, allied healthcare professionals, scientists, researchers and people with fertility problems, will be invited to participate. Formal consensus science methods will be used, including the modified Delphi method, modified Nominal Group Technique and the National Institutes of Health's consensus development conference.Participants/materials setting methods: An international steering group, including the relevant stakeholders outlined above, has been established to guide the development of this core outcome set. Possible core outcomes will be identified by undertaking a systematic review of randomized controlled trials evaluating potential treatments for male factor infertility. These outcomes will be entered into a modified Delphi method. Repeated reflection and re-scoring should promote convergence towards consensus outcomes, which will be prioritized during a consensus development meeting to identify a final core outcome set. We will establish standardized definitions and recommend high-quality measurement instruments for individual core outcomes.Study funding/competing interests: This work has been supported by the Urology Foundation small project award, 2021. C.L.R.B. is the recipient of a BMGF grant and received consultancy fees from Exscentia and Exceed sperm testing, paid to the University of Dundee and speaking fees or honoraria paid personally by Ferring, Copper Surgical and RBMO. S.B. received royalties from Cambridge University Press, Speaker honoraria for Obstetrical and Gynaecological Society of Singapore, Merk SMART Masterclass and Merk FERRING Forum, paid to the University of Aberdeen. Payment for leadership roles within NHS Grampian, previously paid to self, now paid to University of Aberdeen. An Honorarium is received as Editor in Chief of Human Reproduction Open. M.L.E. is an advisor to the companies Hannah and Ro. B.W.M. received an investigator grant from the NHMRC, No: GNT1176437 is a paid consultant for ObsEva and has received research funding from Ferring and Merck. R.R.H. received royalties from Elsevier for a book, consultancy fees from Glyciome, and presentation fees from GryNumber Health and Aytu Bioscience. Aytu Bioscience also funded MiOXYS systems and sensors. Attendance at Fertility 2020 and Roadshow South Africa by Ralf Henkel was funded by LogixX Pharma Ltd. R.R.H. is also Editor in Chief of Andrologia and has been an employee of LogixX Pharma Ltd. since 2020. M.S.K. is an associate editor with Human Reproduction Open. K.Mc.E. received an honoraria for lectures from Bayer and Pharmasure in 2019 and payment for an ESHRE grant review in 2019. His attendance at ESHRE 2019 and AUA 2019 was sponsored by Pharmasure and Bayer, respectively. The remaining authors declare no competing interests.</p
    • …
    corecore