An exact representation of the fermion dynamics in terms of Poisson processes and its connection with Monte Carlo algorithms

We present a simple derivation of a Feynman-Kac type formula to study fermionic systems. In this approach the real time or the imaginary time dynamics is expressed in terms of the evolution of a collection of Poisson processes. A computer implementation of this formula leads to a family of algorithms parametrized by the values of the jump rates of the Poisson processes. From these an optimal algorithm can be chosen which coincides with the Green Function Monte Carlo method in the limit when the latter becomes exact.Comment: 4 pages, 1 PostScript figure, REVTe

Vibration analysis of the civic tower in Rieti

In the last decades the definition of a suitable monitoring system for identifying the dynamic behavior of structures has had a central position in the civil engineering research area. The vibration analysis leads to the recognition of the reference state of structures which is essential to determine the integrity level when extreme events occur, such as earthquakes. The latest seismic events occurred in the world have shown the essential role of the new passive seismic techniques which aim to protect structures and the importance of supervising the building construction operations and the adopted improvement measures. In this work the structural monitoring of the civic tower located in Rieti is presented. In the tower a non-conventional TMD has been installed via an inter-story isolation system at the top floor by means of High Damping Rubber Bearings (HDRB). The general goal is to define a monitoring system suitable with this experimental case through the vibration analysis. Several aspects will be taken into account: the choice of sensors setup, the measured quantities and the extraction of structural information. Firstly this will allow to define the structure’s reference state featured by frequencies, damping ratios and mode shapes. Moreover the effective design of the monitoring system would lead to the characterization of the dynamic behavior of the structure equipped with a passive vibration control system. Different tests have been carried forward: ambient vibration test (AVT), forced vibration test (FVT) with vibrodyne and seismic test (ST). The AVT and the FVT enable to define the monitoring system and check the reliability of the adopted identification tools, among which an Output Only algorithm stands out: the Observer Kalman Filter System Id. On the other hand the ST will point out some preliminary information about the dynamic behaviour of the structure equipped with a non conventional Tuned Mass Damper referring it to higher levels of vibrations

Comment on "Why quantum mechanics cannot be formulated as a Markov process"

In the paper with the above title, D. T. Gillespie [Phys. Rev. A 49, 1607, (1994)] claims that the theory of Markov stochastic processes cannot provide an adequate mathematical framework for quantum mechanics. In conjunction with the specific quantum dynamics considered there, we give a general analysis of the associated dichotomic jump processes. If we assume that Gillespie's "measurement probabilities" \it are \rm the transition probabilities of a stochastic process, then the process must have an invariant (time independent) probability measure. Alternatively, if we demand the probability measure of the process to follow the quantally implemented (via the Born statistical postulate) evolution, then we arrive at the jump process which \it can \rm be interpreted as a Markov process if restricted to a suitable duration time. However, there is no corresponding Markov process consistent with the $Z_2$ event space assumption, if we require its existence for all times $t\in R_+$.Comment: Latex file, resubm. to Phys. Rev.

Improved limits on photon velocity oscillations

The mixing of the photon with a hypothetical sterile paraphotonic state would have consequences on the cosmological propagation of photons. The absence of distortions in the optical spectrum of distant Type Ia supernov\ae allows to extend by two orders of magnitude the previous limit on the Lorentz-violating parameter $\delta$ associated to the photon-paraphoton transition, extracted from the abscence of distortions in the spectrum of the cosmic microwave background. The new limit is consistent with the interpretation of the dimming of distant Type Ia supernov\ae as a consequence of a nonzero cosmological constant. Observations of gamma-rays from active galactic nuclei allow to further extend the limit on $\delta$ by ten orders of magnitude.Comment: 10 pages, 4 Postscript figures, use epsfig, amssym

Implant survival and success rates in patients with risk factors: results from a long-term retrospective study with a 10 to 18 years follow-up

OBJECTIVE: Risk factors for implant therapy are represented by all general and local conditions that through various mechanisms can increase either short-term and long-term failure risk. The aim of this study is to assess the implant survival and implant success rates with single and multiple risk factors. PATIENTS AND METHODS: To address the research purpose, a retrospective cohort study was designed and implemented, including a sample of 225 patients with a total of 871 implants placed. The following risk factors were considered: smoking, bruxism, bone augmentation procedures and the presence of load risk (implants with crown/implant relation > 0.8; angulation > 25°; presence of cantilever). Follow-up ranged from 10 years to 18 years (average follow-up 13.6 years). Failures were subdivided into short-term failures, before the prosthetic phase, and long-term failures, after definitive prosthesis. The success criteria published by Albrektsson and Zarb were adopted. A Cox proportional hazard regression model was used to calculate hazard ratio, with a statistically significant p-value <0.05. RESULTS: Out of the 871 implants placed, 138 did not meet the success criteria, (success rate 84.16%), sixty (43.47%) were classified as "early failure" and seventy-eight as "late failure" (56.53%). A total of 70 dental implants were removed, with a survival rate of 91.96%. CONCLUSIONS: The presence of a single risk factor does not imply a marked increase of failure risk. Among the analyzed factors, the one that proved to be the most dangerous was bruxism, even when presented as the only risk factor. Bruxism with load risk proved to be the most dangerous association (success rate 69.23%) and could be included among the absolute contraindications for implant treatment

A randomized clinical trial about presence of pathogenic microflora and risk of peri-implantitis: comparison of two different types of implant-abutment connections

OBJECTIVE: The aim of this in vivo study was to evaluate two different types of implant-abutment connections: screwed connection and cemented connection, analyzing peri-implant bacteria microflora as well as other clinical parameters. PATIENTS AND METHODS: Twenty implants were selected, inserted in 20 patients, 10 with a screwed implant-abutment connection (Group 1) and 10 with a cemented implant-abutment connection (Group 2). The peri-implant microflora was collected, after at least 360 days from the prosthetic rehabilitation, using paper points inserted in peri-implant sulcus for 30 s. Polymerase chain reaction (PCR) Real-time analyzed the presence of 9 bacteria periodontal-pathogens and Candida albicans. RESULTS: Our findings showed that bacteria colonized all Groups analyzed, the average bacterial count was 3.7 E +08 (±1.19) in Group 1, compared to 2.1 E +08 (±0.16) in Group 2; no statistically significant differences were observed (p>0.0.5). In Group 1, however, bacterial colonization of peri-implant sulci was over the pathogenic threshold for 5 bacteria, indicating a high-risk of peri-implantitis. Also in Group 2, results showed a microflora composed by all bacteria analyzed but, in this case, bacterial colonization of peri-implant sulci was over the pathogenic threshold for only 1 bacterium, indicating a lower risk of peri-implantitis. Moreover, clinical parameters (PPD > 3 mm and m SBI > 0) confirmed a greater risk of peri-implantitis in Group 1 compared to Group 2 (p<0.05). CONCLUSIONS: We concluded that, also after only 360 days, implants with screwed connection showed a higher risk of peri-implantitis that implants with cemented connection

On the zig-zag pilot-wave approach for fermions

We consider a pilot-wave approach for the Dirac theory that was recently proposed by Colin and Wiseman. In this approach, the particles perform a zig-zag motion, due to stochastic jumps of their velocity. We respectively discuss the one-particle theory, the many-particle theory and possible extensions to quantum field theory. We also discuss the non-relativistic limit of the one-particle theory. For a single particle, the motion is always luminal, a feature that persists in the non-relativistic limit. For more than one particle the motion is in general subluminal.Comment: 23 pages, no figures, LaTe

"All on short" prosthetic-implant supported rehabilitations

Objectives. Short implants are increasing their popularity among clinicians who want to fulfill the constant demanding of fixed prosthetic solutions in edentulous jaws. The aim of this report was to propose a new possibility to project and realize an occlusal guided implant cross-arch prosthesis supported by ultra-short implants, describing it presented an edentulous mandible case report. Methods. A 61-year-old, Caucasian, female patient who attended the dental clinic of the University of L’Aquila presented with edentulous posterior inferior jaw and periodontitis and periimplantitis processes in the anterior mandible. The remaining tooth and the affected implant were removed. Six 4-mm-long implants were placed to support a cross-arch metal-resin prosthesis. Results. At 1-year follow-up clinical and radiological assessment showed a good osseointegration of the fixtures and the patient was satisfied with the prosthesis solution. Conclusion. The method, even if it requires further validation, seems to be a valid aid in solving lower edentulous clinical cases, and appears less complex and with more indications of other proposals presented in the current clinical literature. Our case report differs from the current technique All-on-Four, which uses four implants in the mandible to support overdenture prosthesis, assuring a very promising clinical resul

Resonant, broadband and highly efficient optical frequency conversion in semiconductor nanowire gratings at visible and UV wavelengths

Using a hydrodynamic approach we examine bulk- and surface-induced second and third harmonic generation from semiconductor nanowire gratings having a resonant nonlinearity in the absorption region. We demonstrate resonant, broadband and highly efficient optical frequency conversion: contrary to conventional wisdom, we show that harmonic generation can take full advantage of resonant nonlinearities in a spectral range where nonlinear optical coefficients are boosted well beyond what is achievable in the transparent, long-wavelength, non-resonant regime. Using femtosecond pulses with approximately 500 MW/cm2 peak power density, we predict third harmonic conversion efficiencies of approximately 1% in a silicon nanowire array, at nearly any desired UV or visible wavelength, including the range of negative dielectric constant. We also predict surface second harmonic conversion efficiencies of order 0.01%, depending on the electronic effective mass, bistable behavior of the signals as a result of a reshaped resonance, and the onset fifth order nonlinear effects. These remarkable findings, arising from the combined effects of nonlinear resonance dispersion, field localization, and phase-locking, could significantly extend the operational spectral bandwidth of silicon photonics, and strongly suggest that neither linear absorption nor skin depth should be motivating factors to exclude either semiconductors or metals from the list of useful or practical nonlinear materials in any spectral range.Comment: 12 pages, 4 figure